Posted by brazzuka's
[quote]
On 2008-02-05 12:43:40, amnher wrote:
@Brazuka
Is there a new version for the cam?
I tried it many times still 5.95 doesnt work
Last Version:v5.95 w600/w550
CamDriver original w550
HD FTP:
http://brazzukas.4shared.com/
good job!
Posted by amnher
[quote]
On 2008-02-05 17:00:09, brazuka wrote:
On 2008-02-05 12:43:40, amnher wrote:
@Brazuka
Is there a new version for the cam?
I tried it many times still 5.95 doesnt work
Last Version:v5.95 w600/w550
CamDriver original w550
HD FTP:
http://brazzukas.4shared.com/
good job!
What happened sir Brazuka? I got ur original cam driver.
What happened to the camera driver ff 5.95?
Cause this driver when I try to install it and start my phone. Its ok,
But when I try to start the camera it loads the camera without an image for about 2-3 seconds then keeps coming back to menu
[ This Message was edited by: amnher on 2008-02-06 01:12 ]
Posted by amnher
Manage to make it work.
Here are the screenshots
Original 4.6 w550i driver:
Brazuka 5.95 cam driver:
Hmm seems too dark
Posted by brazzuka's
amnher
change of values exposure by values w550 v4.6 fix
try need to test the driver v5.95 w600/w550 same value exposure w550
The values of this auto exposure with the same values of w550 v4.6 but the noise will not decrease because much of the sensor is weak w600/w550 poor
Try to test the driver or you can change the values of exposure
_________________
brazukas.wordpress.com
picasaweb.google.com/brazzukas
brazzukas.4shared.com
[ This Message was edited by: brazuka on 2008-02-06 02:10 ]
Posted by amnher
On 2008-02-06 03:06:40, brazuka wrote:
amnher
change of values exposure by values w550 v4.6 fix
try need to test the driver v5.95 w600/w550 same value exposure w550
The values of this auto exposure with the same values of w550 v4.6 but the noise will not decrease because much of the sensor is weak w600/w550 poor
Try to test the driver or you can change the values of exposure
_________________
brazukas.wordpress.com
picasaweb.google.com/brazzukas
brazzukas.4shared.com
[ This Message was edited by: brazuka on 2008-02-06 02:10 ]
I tried increasing the brightness but still the pictures looks like it is night here but the time is 10:00am
The lightings here are good
Oh the size has changed in your cam driver w8 gonna try this
[ This Message was edited by: amnher on 2008-02-06 02:36 ]
Posted by amnher
On 2008-02-06 03:06:40, brazuka wrote:
amnher
change of values exposure by values w550 v4.6 fix
try need to test the driver v5.95 w600/w550 same value exposure w550
The values of this auto exposure with the same values of w550 v4.6 but the noise will not decrease because much of the sensor is weak w600/w550 poor
Try to test the driver or you can change the values of exposure
_________________
brazukas.wordpress.com
picasaweb.google.com/brazzukas
brazzukas.4shared.com
[ This Message was edited by: brazuka on 2008-02-06 02:10 ]
Pictures taken by 5.95
Note:::
I noticed that when I try to activate night mode, It turns green and when I quit the camera. The phone restarts itself
[ This Message was edited by: amnher on 2008-02-07 06:04 ]
Posted by who
On 2008-01-23 16:39:45, brazuka wrote:
Sony Ericsson CamDriver Version v3.9 by BrAzUkA´s for k610
Version v3.9 BrAzUkA´s
Optimized for the Sony Ericsson k610
Features k610:
-Master Clock™ k610 24mhz clock
-JPEG buffer sizes Compression and reduction sizes
-New White Balance RGB based w910/w710
Last Version:v3.9
Download:
http://www.4shared.com/file/35765407/b1bba264/v39_BrAzUkAs.html
Need to test the driver
[ This Message was edited by: brazuka on 2008-01-26 16:36 ]
couldnt get this to work. alot of lines on my k610
Posted by amnher
Hope that the w600 cam driver will be improved because I have seen that in those dark pictures there are no dots unlike the original one having rainbow dots in dark
Posted by brazzuka's
@who
I did not understand what you wanted to say with lines for the k610 or the lines that works with your k610 ??? What that means?
Driver for k610 post#8
http://www.esato.com/board/viewtopic.php?topic=159467&start=105
@amnher
The driver v5.95 for the w600 this working for the w550? Believe it is because the sequence are the same and exposure of both drivers are equal I don´t know you respond because the w550 takes the photos darker using driver for the w600 should take pictures equal because the exhibits are the same.
Try the driver w600/w550 v5.95 and test it in your w550 is still taking photos darker then the w550 has something different to w600.
[ This Message was edited by: brazuka on 2008-02-06 15:09 ]
Posted by brazzuka's
Sony Ericsson CamDriver Version Series Z v3.2640 Personal™/ MoonLigth™ BrAzUkA´s
Version Series Z v3.2640 Personal™/ MoonLigth™ BrAzUkA´s z710/z610
Sony Ericsson CamDriver Version v3.2640 by BrAzUkA´s for z710
Version v3.2640 BrAzUkA´s
Optimized for the Sony Ericsson z710 ** Works support series OV2640 **
Features v3.2640 z710:
Master Clock™ for z710
New Power Sequence 13mhz to 18mhz clock
Add property Draft Mode resolution VF 240 x 180
New White Balance
New Exposure
New JPEG compression/New JPEG buffer sizes
Version:v3.2640
Download:
http://www.4shared.com/file/3[....]/1e00d406/v32640_BrAzUkAs.html
Series Personal™/ MoonLigth™[b]
[b]Last Version:v3.2640_Personal™
Download:
http://www.4shared.com/file/3[....]/v32640_Personal_BrAzUkAs.html
Last Version:v3.2640_MoonLigth™
Download:
http://www.4shared.com/file/3[....]v32640_MoonLigth_BrAzUkAs.html
Sony Ericsson CamDriver Version v3.2640 by BrAzUkA´s for z610
Version v3.2640 BrAzUkA´s
Optimized for the Sony Ericsson z610 ** Works support series OV2640 **
Features v3.2640 z610:
Master Clock™ for z610
New Power Sequence 13mhz to 18mhz clock
Add property Draft Mode resolution VF 240 x 180
New White Balance
New Exposure
New JPEG compression/New JPEG buffer sizes
Version:v3.2640
Download:
http://www.4shared.com/file/3[....]/1fcbefc5/v32640_BrAzUkAs.html
Last Version:v3.2640_Personal™
Download:
http://www.4shared.com/file/3[....]/v32640_Personal_BrAzUkAs.html
Last Version:v3.2640_MoonLigth™
Download:
http://www.4shared.com/file/3[....]v32640_MoonLigth_BrAzUkAs.html
[ This Message was edited by: brazuka on 2008-02-27 14:01 ]
Posted by brazzuka's
Sony Ericsson CamDriver Version v6.5/ v6.8 by BrAzUkA´s for w880
Version v6.5/ v6.8 BrAzUkA´s
Optimized for the Sony Ericsson w880 ** Works support w660/v630 **
Features v6.5 w880:
Master Clock™ for w880
New Power Sequence 27mhz clock and added sequence cam_watchdog_timeout
Add property Draft Mode resolution VF 240 x 180
Add property FRAME_RATE_13_FPS
New White Balance
New Exposure
Implemented 24mhz Clock Settings
New JPEG compression/New JPEG buffer sizes/New JPEG_qtable
Serie w880
Version:v6.5
Download:
http://www.4shared.com/file/40456625/e57bf48a/v65_BrAzUkAs.html
Last Version:v6.8_Standard™
Download:
http://www.4shared.com/file/4[....]4e7/v68_Standard_BrAzUkAs.html
Last Version:v6.8_Prisma™
Download:
http://www.4shared.com/file/4[....]45068/v68_Prisma_BrAzUkAs.html
[ This Message was edited by: brazuka on 2008-03-11 14:37 ]
Posted by amnher
On 2008-02-06 16:07:46, brazuka wrote:
@who
I did not understand what you wanted to say with lines for the k610 or the lines that works with your k610 ??? What that means?
Driver for k610 post#8
http://www.esato.com/board/viewtopic.php?topic=159467&start=105
@amnher
The driver v5.95 for the w600 this working for the w550? Believe it is because the sequence are the same and exposure of both drivers are equal I don´t know you respond because the w550 takes the photos darker using driver for the w600 should take pictures equal because the exhibits are the same.
Try the driver w600/w550 v5.95 and test it in your w550 is still taking photos darker then the w550 has something different to w600.
[ This Message was edited by: brazuka on 2008-02-06 15:09 ]
Did you make changes in 5.95 comparede to the one I tried yesterday? Cause the One I tried yesterday makes the phone restart when I try to activate night mode and exit the camera
Posted by brazzuka's
@amnher
Try changing the values and the function nigth mode or dark mode wherever the name of function.
I don´t know if the hardware of the w550 accepts change the function nigth mode but try this, but first i think it would be better if u change power sequence and to implemented a little more frequency for the function because the frequency of times a stimulus triggers the hardware in a way that does not need to make major changes in properties.
Look amnher the w600/w550 works with both chips processor ADCM-3855 and ADCM-1700 maybe Accepted work with these two languages.
Then u can change the power sequence u know.
w600/w550:
power sequence on
cam_power_on_0 = 5, 5, 6, 1, 32; // Turn on Vincenne regulator LDO_G (CAM_1V80), wait 50 ms.
cam_power_on_1 = 5, 1, 42, 1, 00; // Set GPIO 42 (= 2.8 V power) as an output.
cam_power_on_2 = 5, 2, 42, 1, 32; // Set GPIO 42 (= 2.8 V power) high, wait 50 ms.
cam_power_on_3 = 5, 0, 0, 1, 32; // Enable RESETn pin (reset is performed), wait 50ms.
cam_power_on_4 = 5, 1, 16, 1, 00; // Set GPIO 16 (= Off pin) as an output.
cam_power_on_5 = 5, 2, 16, 0, 32; // Set GPIO 16 (= Off pin) low, wait 50ms.
cam_power_on_6 = 5, 0, 0, 0, 32; // Disable RESETn pin, wait 50ms.
cam_power_on_7 = 5, 3, [[1]], [[32C8]], [[64]]; // Start the SYSCON_SYSCLK_13_MHZ, wait 100 ms.
cam_power_on_8 = 5, 4, 0, 0, 0A; // Execute i2c sequence 0 (Camera in Sleep state), wait 10ms.
Step 1:
[[1]]=>Reg 1 div/1
[[32C8]]=> start on frequency 13mhz (hexa) value if u want try by [[5DC0]]=>24 mhz or [[6978]]=>27mhz
[[64]]=>100ms (time)
but i don´t know if the hardware support w600/w550
These values are certain to cam can change the start of the cam but that does not change much the result then if u don´t change the power sequence, change the master clock for the w600/w550
//================================
// CAMERA PROPERTIES MASTER CLOCK™ w600
//================================
cam_i2c_address = 56; // Decimal: 86
cam_vf_clock_freq = [[32C8]]; // 13 MHz during view find
cam_ss_clock_freq = 32C8; // 13 MHz during snap shot
cam_ss_clock_freq_d= 5DC0; // 24 MHz yuv-mode
cam_ping_result = 70,00; // Chip ID for ADCM-3850 is 0070
cam_vf_format = B100; // UY1VY2 order is used during view find (YUV 4:2:2).
cam_vf_sync = 7; // Last data is samples after VSYNC goes inactive for viewfinder.
//cam_ss_sync = 7; // Last data is samples after VSYNC goes inactive for snapshot.
cam_ss_sync = f;
cam_ss_sync_d = 7; // Hans fix for RAW data snapshot
cam_ss_format = 0001; // JPEG-format is used for snap shot.
cam_ss_format_d = B100; // UY1VY2 order is used during view find (YUV 4:2:2).
cam_data_offset = 4;
Change of value fpr VF= display screen
cam_vf_clock_freq = [[32C8]]; =>13 MHz
by
cam_vf_clock_freq=[[4650]];=>18mhz or [[5DC0]]=>24mhz
[[XXX]]=> frequency MHz (hexa) value
Change only those values because the other functions and values are the records and bits used by chip w600/w550
Perhaps the increased frequency change the composition of the photos and certainly change the speed of recording recalling that the frequency increased always need a property correspondent for the hardware responds, for example frequency of 18 MHz need a property of frames that support and 18mhz must be included in the programming language of the driver.
Always testing the functions
Try it and good luck
[ This Message was edited by: brazuka on 2008-02-14 01:52 ]
Posted by amnher
On 2008-02-07 04:20:41, brazuka wrote:
@amnher
Try changing the values and the function nigth mode or dark mode wherever the name of function.
I don´t know if the hardware of the w550 accepts change the function nigth mode but try this, but first i think it would be better if u change power sequence and to implemented a little more frequency for the function because the frequency of times a stimulus triggers the hardware in a way that does not need to make major changes in properties.
Look amnher the w600/w550 works with both chips processor ADCM-3855 and EvoCam 4.6 maybe Accepted work with these two languages.
Then u can change the power sequence u know.
w600/w550:
power sequence on
cam_power_on_0 = 5, 5, 6, 1, 32; // Turn on Vincenne regulator LDO_G (CAM_1V80), wait 50 ms.
cam_power_on_1 = 5, 1, 42, 1, 00; // Set GPIO 42 (= 2.8 V power) as an output.
cam_power_on_2 = 5, 2, 42, 1, 32; // Set GPIO 42 (= 2.8 V power) high, wait 50 ms.
cam_power_on_3 = 5, 0, 0, 1, 32; // Enable RESETn pin (reset is performed), wait 50ms.
cam_power_on_4 = 5, 1, 16, 1, 00; // Set GPIO 16 (= Off pin) as an output.
cam_power_on_5 = 5, 2, 16, 0, 32; // Set GPIO 16 (= Off pin) low, wait 50ms.
cam_power_on_6 = 5, 0, 0, 0, 32; // Disable RESETn pin, wait 50ms.
cam_power_on_7 = 5, 3, [[1]], [[32C8]], [[64]]; // Start the SYSCON_SYSCLK_13_MHZ, wait 100 ms.
cam_power_on_8 = 5, 4, 0, 0, 0A; // Execute i2c sequence 0 (Camera in Sleep state), wait 10ms.
Step 1:
[[1]]=>Reg 1 div/1
[[32C8]]=> start on frequency 13mhz (hexa) value if u want try by [[5DC0]]=>24 mhz or [[6978]]=>27mhz
[[64]]=>100ms (time)
but i don´t know if the hardware support w600/w550
These values are certain to cam can change the start of the cam but that does not change much the result then if u don´t change the power sequence, change the master clock for the w600/w550
//================================
// CAMERA PROPERTIES MASTER CLOCK™ w600
//================================
cam_i2c_address = 56; // Decimal: 86
cam_vf_clock_freq = [[32C8]]; // 13 MHz during view find
cam_ss_clock_freq = 32C8; // 13 MHz during snap shot
cam_ss_clock_freq_d= 5DC0; // 24 MHz yuv-mode
cam_ping_result = 70,00; // Chip ID for ADCM-3850 is 0070
cam_vf_format = B100; // UY1VY2 order is used during view find (YUV 4:2:2).
cam_vf_sync = 7; // Last data is samples after VSYNC goes inactive for viewfinder.
//cam_ss_sync = 7; // Last data is samples after VSYNC goes inactive for snapshot.
cam_ss_sync = f;
cam_ss_sync_d = 7; // Hans fix for RAW data snapshot
cam_ss_format = 0001; // JPEG-format is used for snap shot.
cam_ss_format_d = B100; // UY1VY2 order is used during view find (YUV 4:2:2).
cam_data_offset = 4;
Change of value fpr VF= display screen
cam_vf_clock_freq = [[32C8]]; =>13 MHz
by
cam_vf_clock_freq=[[4650]];=>18mhz or [[5DC0]]=>24mhz
[[XXX]]=> frequency MHz (hexa) value
Change only those values because the other functions and values are the records and bits used by chip w600/w550
Perhaps the increased frequency change the composition of the photos and certainly change the speed of recording recalling that the frequency increased always need a property correspondent for the hardware responds, for example frequency of 18 MHz need a property of frames that support and 18mhz must be included in the programming language of the driver.
Always testing the functions
Try it and good luck
Oh my Im noob to this things can't seem to understand
Posted by amnher
Any developments for the cam driver
Posted by brazzuka's
Sony Ericsson CamDriver Version Triple SSS v4.87/v4.86/v4.85/4.6 by BrAzUkA´s for w610
Optimized for the Sony Ericsson w610 ** Works k550 **
Features v4.6 w610:
-Based on version original driver cam W610/k550 and based version v2.3 w610/v2.3 k550
-New JPEG compresion/New JPEG buffer size/New JPEG_qtable
-New Power Sequence with 24mhz frequency
-Master Clock™ w610
-Scenes with new EXIF adapted and appropriate for each scene in test
Version:v4.6
Download:
http://www.4shared.com/file/37402062/931ef72f/v46_BrAzUkAs.html
Features v4.85 w610:
-Based on version original driver cam W610/k550 and based version v2.3 w610/v2.3 k550 and based k810
-Remove Super_Color™ for w610
-New Normal Mode
-New Nigth Mode
-New Focus
-JPEG compresion/New JPEG buffer size/New JPEG_qtable
-Power Sequence with 24mhz frequency
-Master Clock™ w610
-Scenes with new EXIF adapted and appropriate for each scene in test
Last Version:v4.85
Download:
Sony Ericsson CamDriver Version v4.85 by BrAzUkA´s for w610
Version v4.85 BrAzUkA´s
Optimized for the Sony Ericsson w610 ** Works k550 **
Features v4.85 w610:
-Based on version original driver cam W610/k550 and based version v2.3 w610/v2.3 k550 and based k810
-Remove Super_Color™ for w610
-New Normal Mode
-New Nigth Mode
-New Focus
-JPEG compresion/New JPEG buffer size/New JPEG_qtable
-Power Sequence with 24mhz frequency
-Master Clock™ w610
-Scenes with new EXIF adapted and appropriate for each scene in test
fix errors bug
-WB correction fix
-shutter speed corecction fix
-WB if necesary used
-iso fix ISO 100 for all scenes
-property enable and disable stable
Version:v4.85
Download:
http://www.4shared.com/file/38389412/d76a45a5/v485_BrAzUkAs.html
Version v4.86 Triple SSS:
Features v4.86_Standard™
Implemented some properties of k810:
-Image stabilization
-Snapshot operation
-Check if flash needed
-Get EXIF
-New Exposure
-More Stable Scenes
Version: v4.86_Standard™
Download:
http://www.4shared.com/file/3[....]e5/v486_Standard_BrAzUkAs.html
Features v4.86_Searchlight™
Implemented some properties of k810:
-Image stabilization
-Snapshot operation
-Check if flash needed
-Get EXIF
-Scene Sports Stable
Version: v4.86_Searchlight™
Download:
http://www.4shared.com/file/3[....]v486_SearchLigth_BrAzUkAs.html
Features v4.86_SuperNatural™
Implemented some properties of k810:
-Image stabilization
-Snapshot operation
-Check if flash needed
-Get EXIF
-SuperNatural™_Color all the scenes
Version: v4.86_SuperNatural™
Download:
http://www.4shared.com/file/3[....]486_SuperNatural_BrAzUkAs.html
Version v4.87 Triple SSS
Features v4.87_Standard™ w610:
Implemented some properties of k810:
-Image stabilization
-Snapshot operation
-Check if flash needed
-Get EXIF
-New Exposure
-Levels Color Correction Normal/High/Low
-More Stable Scenes
Last Version: v4.87_Standard™
Download:
http://www.4shared.com/file/3[....]2b/v487_Standard_BrAzUkAs.html
Features v4.87_SearchLigth™ w610:
Implemented some properties of k810:
-Image stabilization
-New Exposure
-Snapshot operation
-Check if flash needed
-Get EXIF
-Scene Sports Stable
Last Version: v4.87_Searchlight™
Download:
http://www.4shared.com/file/3[....]v487_SearchLigth_BrAzUkAs.html
Features v4.87_SuperNatural™ w610:
Implemented some properties of k810:
-Image stabilization
-Snapshot operation
-Check if flash needed
-Get EXIF
-New SuperNatural™_Color all the scenes
-New Exposure
-Levels Color Correction Normal/High/Low
Last Version: v4.87_SuperNatural™
Download:
http://www.4shared.com/file/3[....]487_SuperNatural_BrAzUkAs.html
[ This Message was edited by: brazuka on 2008-02-25 11:06 ]
Posted by brazzuka's
Sony Ericsson CamDriver Version v5.5 final by BrAzUkA´s for k510
Based on version original v5.0 MT9V112_Sancho
Version v5.5 final BrAzUkA´s
Optimized for the Sony Ericsson k510
Release v5.5 final k510
Last Driver:v5.5 final
Post#6
http://www.esato.com/board/viewtopic.php?topic=159467&start=75
Posted by amnher
On 2008-02-08 21:16:20, brazuka wrote:
Sony Ericsson CamDriver Version v4.6 by BrAzUkA´s for w610
Version v4.6 BrAzUkA´s
Optimized for the Sony Ericsson w610 ** Works k550 **
Features v4.6 w610:
-Based on version original driver cam W610/k550 and based version v2.3 w610/v2.3 k550
-New JPEG compresion/New JPEG buffer size/New JPEG_qtable
-New Power Sequence with 24mhz frequency
-Master Clock™ w610
-Scenes with new EXIF adapted and appropriate for each scene in test
Last Version:v4.6
Download:
http://www.4shared.com/file/37402062/931ef72f/v46_BrAzUkAs.html
Attention:
Need to test the driver
fix error bug v4.6
[ This Message was edited by: brazuka on 2008-02-10 16:09 ]
How about for the w550i any news?
Posted by amnher
I have seen some new files EVOCAM 5.95 and ADCm, whats this?my phone is w550i
Posted by amnher
Doesnt work. Both ADCM and evocam, it says wrong version please upgrade to 4.6 or later. I tried to look at the camera version and its 5.95
Posted by brazzuka's
amnher wrote:
I have seen some new files EVOCAM 5.95 and ADCm, whats this?my phone is w550i
---------------------------------------------------------------------------------------------------
Your phone is w550 but works with this platform, the same platform of the w600 is the w550 both work with the same chip and sensors only the hardware can be different and still think not, then the base is the same because I don´t think there will be more updated drivers.
try the change power sequence for w550
Try to test the driver and post the results here amnher
_________________
w810drivers:Chengrong/Raiderski/Kriomag/lpachuong/SPU/Sarmad
w200drivers:v7.5 final
brazukas.wordpress.com
picasaweb.google.com/brazzukas
brazzukas.4shared.com
[ This Message was edited by: brazuka on 2008-02-12 02:38 ]
Posted by amnher
On 2008-02-12 03:37:15, brazuka wrote:
amnher wrote:
I have seen some new files EVOCAM 5.95 and ADCm, whats this?my phone is w550i
---------------------------------------------------------------------------------------------------
Your phone is w550 but works with this platform, the same platform of the w600 is the w550 both work with the same chip and sensors only the hardware can be different and still think not, then the base is the same because I don´t think there will be more updated drivers.
try the change power sequence for w550
Try to test the driver and post the results here amnher
_________________
w810drivers:Chengrong/Raiderski/Kriomag/lpachuong/SPU/Sarmad
w200drivers:v7.5 final
brazukas.wordpress.com
picasaweb.google.com/brazzukas
brazzukas.4shared.com
[ This Message was edited by: brazuka on 2008-02-12 02:38 ]
It says upgrade to newer driver 4.6 or later. I tried both evocam and ADCM same problem
Posted by amnher
I dont know why, when I try to check the software info in my phone I can see that camera evrsion :5.95 but still it says wrong version upgrade to 4.6 or later
Posted by amnher
hey Brazuka most of the time Im having aproblem that my w550i is not recognized when flashing. I mean when I hold C button it says "Usb not reocgnized" and startsup my phone and after that I am able to upload files even though I dont experience this problems before. Im able to reflash smoothly without problem but now im having this
Posted by killem
-New Power Sequence with 24mhz frequency
-Master Clock™ w610
-Master Clock™ w610
What is it? Where can I see a difference?
Posted by amnher
Still not working wrong version
Posted by brazzuka's
@amhnen
You must be wrong installing the drivers, inform themselves better how to install the drivers... folder ifs/settings/camera
Read the file that comes within the drivers txt file to see how the procedure of installation
The sequences are identical for both w600/w550, ask for someone who has the w600 and see if this passing the same thing with the driver.
@killem
You will notice the difference primarily on the screen display, the screen goes faster when you move the camera to get started or change of photography to video is faster these changes are some visible only by the other test recording of video or perhaps snapping photos .
Take some pictures and some videos serious and if you want to post here
Posted by amnher
I can install other camera drivers properly excpt for this two. the other 5.95 the normal one can be installed but the evocam and ADCM doesnt work
Posted by brazzuka's
@amnher
Whats the goin on with the cam? A cam does not start?
Posted by amnher
When I try to install the original 5.95 cam driver, everything works fine excpt for the dark and error in nightmode but when I try Using Evocam or ADCm, When I start the cam, It starts a few seconds but goes to "Wrong version, Please Upgrade to 4.6 or later." This only happens in this evocam and ADCm thats why I cannot test it
Posted by aashish007
hey mann waiting for a new version of the w830i camdriver from you!!
Posted by brazzuka's
amnher
What problem is with the nigthmode? Are the photos or videos? Take some photos in normal mode and nigth mode
Changed the properties nigth mode and increase fps v5.95 beta
Take some pics v5.95 beta and v.adcm and evocam is the same v5.95 or 4.6 but i don´t know if works with w550... u know if this works w600?
Posted by brazzuka's
For all developers inside OV2640 for series k/w/z/s sony ericsson k610/k630/w580/s500/w660/w830/w850/w880/w910
Z555i/Z610i/Z710i/Z750i/Z770i
OV2640 Color CMOS UXGA (2.0 MegaPixel) CameraChip™ Image Sensor with OmniPixel2™ Technology
The OV2640 CameraChip™ image sensor is a low voltage CMOS sensor that provides the full functionality of a single-chip UXGA (1632 x 1232) camera and image processor in a small footprint package. The OV2640 provides full-frame, sub-sampled, scaled or windowed 8-bit/10-bit images in a wide range of formats, controlled through the Serial Camera Control Bus (SCCB) interface.
This product has an image array capable of operating at up to 15 frames per second (fps) in UXGA resolution with complete user control over image quality, formatting and output data transfer. All required image processing functions, including exposure control, gamma, white balance, color saturation, hue control, white pixel canceling, noise canceling, and more, are also programmable through the SCCB interface. The OV2640 also includes a compression engine for increased processing power. In addition, OmniVision CameraChip products use proprietary sensor technology to improve image quality by reducing or eliminating common lighting/electrical sources of image contamination, such as fixed pattern noise, smearing, etc., to produce a clean, fully stable color image.
Product Features:
-high sensitivity for low-light operation
-low operating voltage for embedded portable apps
-output support for Raw RGB, RGB (RGB565/555), GRB422, YUV (422/420) and YCbCr (4:2:2) formats
-supports image sizes: UXGA, SXGA, SVGA, and any size scaling down from SXGA to 40 x 30
-automatic image control functions including Automatic Exposure Control (AEC), Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic Band Filter (ABF), and Automatic Black-Level Calibration (ABLC)
-image quality controls including color saturation, gamma, sharpness (edge enhancement), lens correction, white pixel canceling, noise canceling, and 50/60 Hz luminance detection
-zooming, panning, and windowing functions
-internal/external frame synchronization
-variable frame rate control
-supports LED and flash strobe mode
-supports scaling
-supports compression
-embedded microcontroller
-line optical black level output capability
-video or snapshot operation
Product Specifications:
resolution:
UXGA SVGA and below
-package options:
38-pin CSP2
-optical format:
1/4”
-pixel size:
2.2 x 2.2 µm
-frame rate:
15 fps full res
-output format:
YUV RGB Raw RGB Data Compressed Data
-power consumption:
125 mW (YUV)
140 mW (compressed)
applications:
camera/video phones digital camcorders digital still cameras webcams games/toys
Posted by amnher
when I use Evocam and ADCM. my camera doesnt start it says wrong version. When I use the 5.95, The camera starts but the image is dark and nightmode makes the phone restart
Posted by brazzuka's
[quote]
On 2008-02-14 02:27:54, amnher wrote:
when I use Evocam and ADCM. my camera doesnt start it says wrong version. When I use the 5.95, The camera starts but the image is dark and nightmode makes the phone restart
----------------------------------------------------------------------------------------------------
version 5.95_beta !!! try v5.95 beta amnher
To ask someone if it works in a w600 the versions 5.96/evocam/adcm
Posted by amnher
[quote]
On 2008-02-14 02:37:15, brazuka wrote:
On 2008-02-14 02:27:54, amnher wrote:
when I use Evocam and ADCM. my camera doesnt start it says wrong version. When I use the 5.95, The camera starts but the image is dark and nightmode makes the phone restart
----------------------------------------------------------------------------------------------------
version 5.95_beta !!! try v5.95 beta amnher
To ask someone if it works in a w600 the versions 5.96/evocam/adcm
5.95 somehow is like the same in 5.95 final
Posted by brazzuka's
News:
Releases
Sony Ericsson series k/w/z:
Sony Ericsson w200:
v 7.5 BrAzUkA´s super cam driver final_SuperColor™
Features v 7.5 BrAzUkA´s super cam driver final_SuperColor™
Video recording:
High Quality=15fps to 20fps
Low Quality=20fps to 30fps
Normal Mode™ Dayligth=15fps
Nigth Mode™=10fps to 15fps
Normal 15fps to 20fps, Night 10fps to 15fps
Normal mode has same Zoom
Normal mode with Macro White Balance quality
EnhancedNight™ mode has Auto Focus Not valid for w200 MT9V112
Added properties:
New Power sequence™ on/off with new Master Clock™ for w200
Automatic mode
Flash Support
Night Mode™ Adjust (Button 2 Two Keyboard)
Color Correction™
Standby Cam
Hue Mode
JPEG buffer 1280x960 BrAzUkA´s Snapshot™ interpol 1,2MB Mode Expanded
Saturation Stable
EnhancedNight™ Video
More Reduction Noise
Spot Mode ON (Brightness base of the center) Adjust(+/-)Volume
SuperColor™ Scene Fly Clarity Super Color™ Mode
New Sequence Brightness
Shutter speed™
New Zoom property
Master Clock™ for w200
Brightness adjust EV plus daylight and night to change value Adjust(+/-)Volume
New White Balance™ High Quality
Effects-Scenes™ Support w200 Adjust (Button 3 Three Keyboard)
*Scenes support w200:(Choose in effects menu)
-Auto Mode=>Normal
-Landscape Mode=>negative/incandescent(tungsten)
-Fly Clarity Super Color™ Mode=>black & white/cloudy(indoor)
-Clear sky Mode=>solarize
-Portrait Mode=>sepia/fluorescent(white ice)
Incredible Photo metering
More Sharpening and stable
Contrast stable
Auto Framerate Flash
Auto Exposure™ and Max Manual Exposure™ Sometimes Restart the camera for a new reading of exposure
Max Manual Exposure™ Adjust EV(+/-)
*Pseudo Scenes
*************
About Scenes:
*************
The effects have been replaced by pseudo-scenes
Scenes support w200:(Choose in effects menu)
-Auto Mode=>Normal
-Landscape Mode=>negative/incandescent(tungsten)
-Fly Clarity Super Color™ Mode=>black & white/cloudy(indoor)
-Clear sky Mode=>solarize
-Portrait Mode=>sepia/fluorescent(white ice)
Download:post#7
Sony Ericsson w580:
Features v4.15 w580:
- Super Color™
- Scene Super Color™ Effect solarize (Choose in effects menu)
- New Exposure
- New JPEG_qtable compresion
- Added property Size Config VR_Normal_Mode and VR_Nigth_Mode
- New Master Clock™ with Clock 24 MHz yuv-mode ss_cam
Last Version:v4.15_beta
Download:post#8
Sony Ericsson k510:
Features v5.5 final k510:
-Setup MT9V112_Sancho
-Video Recording:
Higth Quality 10fps to 15fps
Low Quality 20fps to 30fps
-Master Clock™ for k510
-New Power Sequence 48mhz
-New Exposure
-Implemented properties frames 14fps/24fps/29fps Settings works 48mhz frequency
-Camera Control Registers Initial First and Second Sequence k510 Setup MT9M112_Sancho
-AE level
-Brightness
-Contrast
-Sharpening
-Luma property
-New Sequence Gama
-Focus test
-AF value test
-Spot Photometry
-Photo metering
-Sequences BrAzUkA´s super cam driver for k510 with New Power save
-New Sequence JPEG compression level/New JPEG buffer size/New JPEG_qtable
-New White Balance
-Scenes for k510 in test
Last Driver:v5.5 final
Download:post#6
Sony Ericsson w600/w550/k600/z550:
Features w600:
Video recording:
Low Quality= New Recording Video fps
High Quality= New Recording Video fps
Added properties:More Colors
More Sharpness
New White Balance
Pseudo Scene Super Color™ Effect solarize (Choose in effects menu)
Incredible brightness
New JPEG compresion/New JPEG_qtable/New JPEG buffer size
New Exposure
Master Clock™ for w600 with 18mhz
Removed some property exposure
Version:v5.6
Version:v5.95_beta
Last Version:v5.95_ADCM3855
Download:post#9
Sony Ericsson w610/k550:
Features v4.6 w610:
-Based on version original driver cam W610/k550 and based version v2.3 w610/v2.3 k550
-New JPEG compresion/New JPEG buffer size/New JPEG_qtable
-New Power Sequence with 24mhz frequency
-Master Clock™ w610
-Scenes with new EXIF adapted and appropriate for each scene in test
Last Version:v4.6
Download: post#12
Features v4.85 w610:
-Based on version original driver cam W610/k550 and based version v2.3 w610/v2.3 k550
-Super_Color™ for w610
-Scene Party Super_Color™ (Choose in Scenes menu)
-New Normal Mode
-New Nigth Mode
-JPEG compresion/New JPEG buffer size/New JPEG_qtable
-Power Sequence with 24mhz frequency
-Master Clock™ w610
-Scenes with new EXIF adapted and appropriate for each scene in test
Last Version:v4.85
Download: post#12
[ This Message was edited by: brazuka on 2008-02-15 12:26 ]
Posted by brazzuka's
Liquid Resize
onOne Software Announces Acquisition of Liquid Resize Technology
onOne Software adds ground-breaking image resizing and retargeting technology to its product offerings.
Portland, OR Janury 17, 2008 onOne Software, Inc., provider of world-class software solutions for professional photographers and graphic designers, announces today the technology acquisition of Liquid Resize which introduces a ground-breaking new way to resize images using a technique known as "seam carving" to reduce the distortion that typically occurs when manipulating the aspect ratio of an image.
"We're excited to have acquired this incredible new and unique image resizing technology to add to our award-winning line of Photoshop® plug-ins," said Craig Keudell, president of onOne Software. "This new technology that allows users to maintain the original aspect ratio of a digital image will provide photographers and graphic designers alike unprecedented control when they resize or adjust the composition of their images."
About Liquid Resize
Liquid Resize, a "content aware" image resizing application, was originally developed by the Vienna, Austria based husband-wife team of Ramin Sabet and Irmgard Sabet-Wasinger and is based on the work of Shai Avidan and Ariel Shamir that made its first appearance in a video
Video:
http://www.youtube.com/watch?v=qadw0BRKeMk released at Siggraph 2007.
Liquid Resize will allow users to resize an image without the traditional geometric limitations while minimizing any distortion that would typically result from changing the original aspect ratio of an image.
original
with Liquid Resize
Availability and Pricing
A free public beta of Liquid Resize for both Windows and Mac OS X users will be available in late January 2008 as a stand-alone application from the onOne Software Web site. A Photoshop plug-in version of Liquid Resize is expected to be available in the middle of 2008. Pricing has not yet been announced for the final version of Liquid Resize that will be released later in 2008.
Update - January 31, 2008
The public beta of Liquid Resize is not yet available as originally planned. For updates on the availability of the Liquid Resize public beta, please visit the onOne Blog.
info:http://www.thegedanken.com/retarget/
more info: http://www.ononesoftware.com/
Posted by amnher
On 2008-02-14 18:43:40, brazuka wrote:
News:
Releases
Sony Ericsson series k/w/z:
Sony Ericsson w200:
v 7.5 BrAzUkA´s super cam driver final_SuperColor™
Features v 7.5 BrAzUkA´s super cam driver final_SuperColor™
Video recording:
High Quality=15fps to 20fps
Low Quality=20fps to 30fps
Normal Mode™ Dayligth=15fps
Nigth Mode™=10fps to 15fps
Normal 15fps to 20fps, Night 10fps to 15fps
Normal mode has same Zoom
Normal mode with Macro White Balance quality
EnhancedNight™ mode has Auto Focus Not valid for w200 MT9V112
Added properties:
New Power sequence™ on/off with new Master Clock™ for w200
Automatic mode
Flash Support
Night Mode™ Adjust (Button 2 Two Keyboard)
Color Correction™
Standby Cam
Hue Mode
JPEG buffer 1280x960 BrAzUkA´s Snapshot™ interpol 1,2MB Mode Expanded
Saturation Stable
EnhancedNight™ Video
More Reduction Noise
Spot Mode ON (Brightness base of the center) Adjust(+/-)Volume
SuperColor™ Scene Fly Clarity Super Color™ Mode
New Sequence Brightness
Shutter speed™
New Zoom property
Master Clock™ for w200
Brightness adjust EV plus daylight and night to change value Adjust(+/-)Volume
New White Balance™ High Quality
Effects-Scenes™ Support w200 Adjust (Button 3 Three Keyboard)
*Scenes support w200:(Choose in effects menu)
-Auto Mode=>Normal
-Landscape Mode=>negative/incandescent(tungsten)
-Fly Clarity Super Color™ Mode=>black & white/cloudy(indoor)
-Clear sky Mode=>solarize
-Portrait Mode=>sepia/fluorescent(white ice)
Incredible Photo metering
More Sharpening and stable
Contrast stable
Auto Framerate Flash
Auto Exposure™ and Max Manual Exposure™ Sometimes Restart the camera for a new reading of exposure
Max Manual Exposure™ Adjust EV(+/-)
*Pseudo Scenes
*************
About Scenes:
*************
The effects have been replaced by pseudo-scenes
Scenes support w200:(Choose in effects menu)
-Auto Mode=>Normal
-Landscape Mode=>negative/incandescent(tungsten)
-Fly Clarity Super Color™ Mode=>black & white/cloudy(indoor)
-Clear sky Mode=>solarize
-Portrait Mode=>sepia/fluorescent(white ice)
Download:post#7
Sony Ericsson w580:
Features v4.15 w580:
- Super Color™
- Scene Super Color™ Effect solarize (Choose in effects menu)
- New Exposure
- New JPEG_qtable compresion
- Added property Size Config VR_Normal_Mode and VR_Nigth_Mode
- New Master Clock™ with Clock 24 MHz yuv-mode ss_cam
Last Version:v4.15_beta
Download:post#8
Sony Ericsson k510:
Features v5.5 final k510:
-Setup MT9V112_Sancho
-Video Recording:
Higth Quality 10fps to 15fps
Low Quality 20fps to 30fps
-Master Clock™ for k510
-New Power Sequence 48mhz
-New Exposure
-Implemented properties frames 14fps/24fps/29fps Settings works 48mhz frequency
-Camera Control Registers Initial First and Second Sequence k510 Setup MT9M112_Sancho
-AE level
-Brightness
-Contrast
-Sharpening
-Luma property
-New Sequence Gama
-Focus test
-AF value test
-Spot Photometry
-Photo metering
-Sequences BrAzUkA´s super cam driver for k510 with New Power save
-New Sequence JPEG compression level/New JPEG buffer size/New JPEG_qtable
-New White Balance
-Scenes for k510 in test
Last Driver:v5.5 final
Download:post#6
Sony Ericsson w600/w550/z550:
Features w600:
Video recording:
Low Quality= New Recording Video fps
High Quality= New Recording Video fps
Added properties:More Colors
More Sharpness
New White Balance
Incredible brightness
New JPEG compresion/New JPEG buffer size/New JPEG_qtable
New Exposure
New Power Sequence clock 18mhz
Master Clock™ for w600
Version:v5.6
Version:v5.95
Version:v5.95_beta
Last Version:v5.95_ADCM
Last Version:v5.95_EVOCAM
Last Version:v5.95_ADCM3855
Last Version:v5.95_ADCM1700
Download:post#9
Sony Ericsson w610/k550:
Features v4.6 w610:
-Based on version original driver cam W610/k550 and based version v2.3 w610/v2.3 k550
-New JPEG compresion/New JPEG buffer size/New JPEG_qtable
-New Power Sequence with 24mhz frequency
-Master Clock™ w610
-Scenes with new EXIF adapted and appropriate for each scene in test
Last Version:v4.6
Download: post#12
Features v4.85 w610:
-Based on version original driver cam W610/k550 and based version v2.3 w610/v2.3 k550
-Super_Color™ for w610
-Scene Party Super_Color™ (Choose in Scenes menu)
-New Normal Mode
-New Nigth Mode
-JPEG compresion/New JPEG buffer size/New JPEG_qtable
-Power Sequence with 24mhz frequency
-Master Clock™ w610
-Scenes with new EXIF adapted and appropriate for each scene in test
Last Version:v4.85
Download: post#12
[ This Message was edited by: brazuka on 2008-02-14 21:08 ]
WHy does my cam doesnt start when I use the two new ADCM cam driver. Oh my ive seen your other drivers for other model of SE and they are overwhelming. I adore you brazuka for this. Hope you can do something for my w550i.
I am able to use the 5.95, 5.95 beta but I cant use the others. so i can test the drivers and put screenshots
[ This Message was edited by: amnher on 2008-02-15 03:39 ]
Posted by amnher
5.95 beta screen shot:
ANother w550i/w600 camdriver by Abmadman Camdriver 2.2(Gooddarkshot):
The driver is located here http://aatoblogchebhai.blogspot.com/
Original w550i 4.6 Camera Driver:
As you can see the abmadman camdriver are good and grainless if only brighter
Posted by amnher
Still the new ADCM doesnt work. I tried both versions. still no hope
Posted by aashish007
hey pls post a new w830 camera driver
Posted by killem
v4.85 w610 is good - faster but still very dark.
Posted by brazzuka's
@amnher
The driver gooddarkshoot is based on a z550 believe that the creator is something Leo, only changed the exposure that driver.
Indeed the driver is not good w600/w550 the sensors nor the chip to these models are few changes that are noted because they are not supported by the hardware or the hardware does not respond to the stimuli of changes.
Try the driver v5.95_ADCM_3855 posted in HD because the values have changed exposure equal to the values of the property z550 and added Super Color for the purpose solarize but i don´t know if this working properly for w600.
There are also some pacthes within the package and with a pacthe you can use several drivers cam inside a folder.
Read the post # 9 of w600/550
So need to test the driver v5.95_ADCM_3855
The last chance
and good luck
@aashish007
New things in the driver w830 like that??? I don´t miracles friend
joking I hope the results of a driver with the same chip used in w830 responds to see how well can see that can be introduced in the w830 but they are not major changes but u could ask for Rai trying to do a super model and similar to the w830/w850
So post some pics with your w830 here
Cheers
@killem
I don´t know very well how it is behaving the driver because nobody take photos on the driver nobody post videos of both the driver Sonarik as Brazukas could at least post some pictures and video to try to improve the exposure for each scene and environment but it is hard when you do not have help
I also don´t know if the exposure is random and sensor chip that because I am not seeing much difference in the exhibition and its effects on the photos, because they were changed and the exposure when there is a comprehensive review of the photograph are completely different from those it has in programming.
Another thing I think that the effects are pre determined and configured without power change them, that is the effect can not be changed because they simply do not respond to the duties. Therefore it changed ownership Super Color for the post of scenes on the scene party to see if there is any change, but it all depends on tests and consequences.
Cheers
See u Guys !!!
[ This Message was edited by: brazuka on 2008-02-15 18:27 ]
Posted by brazzuka's
To All
Guys !!!
Post your photos here to make comparisons and to try to improve the driver
Take photos first in the normal mode self with good brightness dayligth and environments with very clear colors then with low brightness in darkness nigth mode.
Tnks all
Posted by aashish007
@brazuka
hey sorry i meant an update of your driver!
ill surely upload pics when i get time.
btw i have a question about the video recording in the w850/w830(im talking about the default drivers)..its way too grainy as compared to a nokia phone.so what is the difference actually..is it a hardware problem?
Posted by amnher
On 2008-02-15 13:54:59, brazuka wrote:
@amnher
The driver gooddarkshoot is based on a z550 believe that the creator is something Leo, only changed the exposure that driver.
Indeed the driver is not good w600/w550 the sensors nor the chip to these models are few changes that are noted because they are not supported by the hardware or the hardware does not respond to the stimuli of changes.
Try the driver v5.95_ADCM_3855 posted in HD because the values have changed exposure equal to the values of the property z550 and added Super Color for the purpose solarize but i don´t know if this working properly for w600.
There are also some pacthes within the package and with a pacthe you can use several drivers cam inside a folder.
Read the post # 9 of w600/550
So need to test the driver v5.95_ADCM_3855
The last chance
and good luck
@aashish007
New things in the driver w830 like that??? I don´t miracles friend
joking I hope the results of a driver with the same chip used in w830 responds to see how well can see that can be introduced in the w830 but they are not major changes but u could ask for Rai trying to do a super model and similar to the w830/w850
So post some pics with your w830 here
Cheers
@killem
I don´t know very well how it is behaving the driver because nobody take photos on the driver nobody post videos of both the driver Sonarik as Brazukas could at least post some pictures and video to try to improve the exposure for each scene and environment but it is hard when you do not have help
I also don´t know if the exposure is random and sensor chip that because I am not seeing much difference in the exhibition and its effects on the photos, because they were changed and the exposure when there is a comprehensive review of the photograph are completely different from those it has in programming.
Another thing I think that the effects are pre determined and configured without power change them, that is the effect can not be changed because they simply do not respond to the duties. Therefore it changed ownership Super Color for the post of scenes on the scene party to see if there is any change, but it all depends on tests and consequences.
Cheers
See u Guys !!!
[ This Message was edited by: brazuka on 2008-02-15 18:27 ]
Sorry about the late reply tomorrow ill post some screenshot about the new ADCM I found together with 24mhz ADCM but theres a problem, when I look at the view finder the screen is distorted in the camera, seems the view is mixed up, I can see lines of images, it seems shredded but when I take the pictures everything is normal. Its distorted in the canvas but after taking picture, everything is ok.
Posted by brazzuka's
@ amnher
Then the chip does not support ADCM above 18mhz this is a distorted image on the display but about pics ?
If you could post some pictures, photos with color and light and other environments with photos in dark environment would be good on the videos and increased the speed of recording.
You can analyze the videos fps by the program apple quicktime
Posted by brazzuka's
@ aashish007
A video recording of the noise or with the photos? U can analyze the videos with programm quicktime then you put the results here.
About Nokia , depends which model nokia??
The nokia works with a software that plastific the photos beauty the photos taking the real composition of the photos the identity of some of the photos nokias is hidden by the programming that beauty like a salon hair... the picture seems a puppet of porcelain like use photoshop.. u know
But i think that not all models of nokia doing this and i have no information on the programming of the nokia cam drivers, but i know that some new models of phones are being produced with new sensors and with new display to capture the image faster in screen.I think of a model for nokia already can shoot video recording in resolution 1.2mb to 2mb at 30 fps and ericsson still can not if i don´t had mistake
Try to use new driver version w830 and after post the results
[ This Message was edited by: brazuka on 2008-02-17 21:10 ]
Posted by amnher
I'll post pictures later cause im having a problem uploading this pix in esato. So what will I do the pictures are fine but the view is distorted