Esato

Forum > Sony Ericsson / Sony > Software, Firmware and Drivers > K850 Firmware Overview

Previous  123 ... 111112113 ... 695696697  Next
Author K850 Firmware Overview
ANDYBRAD
K850 Blue
Joined: Dec 22, 2006
Posts: 56
PM
Posted: 2008-01-16 16:17
Reply with quoteEdit/Delete This PostPrint this post
whats emma?
vbayma
K850 Blue
Joined: Mar 30, 2006
Posts: 142
PM
Posted: 2008-01-16 16:41
Reply with quoteEdit/Delete This PostPrint this post
I'm getting confused....Is there is or not a New Firmware R1DA038 for generic phones.


SE Suport told me that it have..

Dear Victor,

Thank you for contacting the Sony Ericsson Call Centre.

There was a firmware update released for the K850i just recently, the firmware version is R1DA038. This firmware is for Generic UK K850i's

Should you require any further assistance, please do not hesitate to contact us again for further help and support.

For more information on our products and services, please feel free to visit our website at www.sonyericsson.com

www.sonyericsson.com/fun
Register now for great content and fantastic Web and WAP Services.

Kind Regards,
Paul Conlan

Sony Ericsson Call Centre
mailto:questions.gb@support.sonyericsson.com
http://www.sonyericsson.com
Tervel
K850 Blue
Joined: Jun 30, 2003
Posts: > 500
From: US, TX
PM
Posted: 2008-01-16 16:51
Reply with quoteEdit/Delete This PostPrint this post

On 2008-01-14 23:56:54, darrengf wrote:

Sorry for the delay,

I know this sounds strange, your phone came in a TIM box which is Telecom Italia. Does the IMEI number match the box you got it in.

The phone is Generic from what i understand.

APAC-ANZ is Asia, Pacific, Australia

Tim has its own branding (TIM ITALY/ BLUE TIM-ITALY)

Hope this helps


Just to follow up - the IMEI on the box matches the IMEI on the phone so this is just plain weird... Is it possible that the phone was re-flashed with the APAC-ANZ specific info? Like I said - I bought it from an individual, not a vendor but I it came with 037 firmware already loaded. Also - when going to >*<<*<* and then Service Info > Software Info I get:
prg12004404_CHINA_SO R1CA037...

Where can I get the build date on the phone? I don't see any labels on it anymore...
K850i|K790i-quad band|W810|K750i|T637|T616|T68|T28
Tapwave Zodiac
DON'T USE WOTAN SERVER E V E R ! ! !
1889
K850 Blue
Joined: Dec 09, 2007
Posts: 118
PM
Posted: 2008-01-16 17:57
Reply with quoteEdit/Delete This PostPrint this post
Going back to a comment on a previous page. Is 038 no longer available now?

My mate needs her phone updating so if its not available anymore, I'll tell her to wait until there is a new firmware released.
ANDYBRAD
K850 Blue
Joined: Dec 22, 2006
Posts: 56
PM
Posted: 2008-01-16 18:09
Reply with quoteEdit/Delete This PostPrint this post
I THINK THE ONLY OPTION IS TO TRY IT AND SEE WHAT YOU GET.
plankgatan
Apple iPhone 5S
Joined: May 20, 2007
Posts: > 500
From: Sweden fur alle
PM
Posted: 2008-01-16 18:34
Reply with quoteEdit/Delete This PostPrint this post

On 2008-01-16 16:17:12, ANDYBRAD wrote:
whats emma?


its the best uppdating system for cell phones....

DPY flashing (uppdating) with EMMA server can only be done by your work shop....when you uppdate(DPY flash) with EMMA you get the firmware installed on a clean memory, etc.

when you uppdate by your build in uppdating service OR by SEUS you get (same) firmware installed layer by layer (if you understand what i mean)......

it much better to DPY flash your phone then to use SEUS

_________________
I K850, W810 & T29
------------------------------------
____________________________________
(t610, t630, k700, k750, k800, k810)



[ This Message was edited by: plankgatan on 2008-01-16 17:42 ]
darrengf
T68i
Joined: Dec 21, 2003
Posts: > 500
PM
Posted: 2008-01-16 20:25
Reply with quoteEdit/Delete This PostPrint this post

On 2008-01-16 16:51:17, Tervel wrote:

On 2008-01-14 23:56:54, darrengf wrote:

Sorry for the delay,

I know this sounds strange, your phone came in a TIM box which is Telecom Italia. Does the IMEI number match the box you got it in.

The phone is Generic from what i understand.

APAC-ANZ is Asia, Pacific, Australia

Tim has its own branding (TIM ITALY/ BLUE TIM-ITALY)

Hope this helps


Just to follow up - the IMEI on the box matches the IMEI on the phone so this is just plain weird... Is it possible that the phone was re-flashed with the APAC-ANZ specific info? Like I said - I bought it from an individual, not a vendor but I it came with 037 firmware already loaded. Also - when going to >*<<*<* and then Service Info > Software Info I get:
prg12004404_CHINA_SO R1CA037...

Where can I get the build date on the phone? I don't see any labels on it anymore...




Use this link to gain your build date

http://www.esato.com/board/viewtopic.php?topic=157121&start=342
GoonerB
Model not set
Joined: Jan 16, 2008
Posts: 12
PM
Posted: 2008-01-16 20:36
Reply with quoteEdit/Delete This PostPrint this post
Posted: 2008-01-16 19:30
Hi All,

Ok, firstly - I work for Vodafone so have tried all the usual fixes & have consulted our Technical Support Dept' but as of yet no fix.

Upgraded my software last night and all was fine. Browsed the web this morning.. still looking good...

..but then when trying to get on DailyMail.com at lunch, I got:

"Proxy server error. Please check the URL and try again. HTTP 400 Bad Request"

Tried another site and got the same. And another, and another.. Infact every non-Vodafone Live page I tried to get onto I got the same error. Tried it on the store phone (R1DA029) and the sites were fine.

I've changed my SIM, Sent new OTA configs, manually input the settings, hard resets, manual roams.. everything and still no joy.

Anyone got any ideas on this or experienced anything similar?

Also, my rss feeds no longer update.. according to the phone "No feed exists at this adress".

Clueless. - and since I use my phone mainly to look at the web.. its a right pain.

I posted this elsewhere but thought it was quite relevant to the thread too.Any help greatly appreciated.
darrengf
T68i
Joined: Dec 21, 2003
Posts: > 500
PM
Posted: 2008-01-16 20:53
Reply with quoteEdit/Delete This PostPrint this post
Ive just upated the other Esato request for you

http://www.esato.com/board/viewtopic.php?topic=163099

And on line at mo if you want to pm me

[ This Message was edited by: darrengf on 2008-01-16 19:54 ]
Sebby
W810 black
Joined: Dec 12, 2004
Posts: > 500
From: London, UK
PM
Posted: 2008-01-16 21:31
Reply with quoteEdit/Delete This PostPrint this post

On 2008-01-16 16:41:00, vbayma wrote:
I'm getting confused....Is there is or not a New Firmware R1DA038 for generic phones.


SE Suport told me that it have..

Dear Victor,

Thank you for contacting the Sony Ericsson Call Centre.

There was a firmware update released for the K850i just recently, the firmware version is R1DA038. This firmware is for Generic UK K850i's

Should you require any further assistance, please do not hesitate to contact us again for further help and support.

For more information on our products and services, please feel free to visit our website at http://www.sonyericsson.com

http://www.sonyericsson.com/fun
Register now for great content and fantastic Web and WAP Services.

Kind Regards,
Paul Conlan

Sony Ericsson Call Centre
mailto:questions.gb@support.sonyericsson.com
http://www.sonyericsson.com


Clearly a lie as it still says that my phone is up to date. [addsig]
DCUK7
Xperia X10 Mini Black
Joined: Aug 01, 2004
Posts: > 500
From: Liverpool, UK
PM
Posted: 2008-01-17 00:34
Reply with quoteEdit/Delete This PostPrint this post
@plankgatan

By calling it DPY flashing you are kind of misrepresenting what it actually is. From what I can tell its a simple BINFS format before flash. OS gets removed but the bootloader stays intact (unlike SEUS which does not perform the BINFS format).

DPY is the acronym SE use to show what region your phone was sold to. All phones have a DPY code on the IMEI label under the battery cover and this code defines the region the phone should come from.

EMMA uses the CDA code to select your appropriate firmware for flashing. This is how SESC can tell if you have flashed the phone with a different region's firmware. They would be able to look at the DPY code and CDA code and see that they don't match up. That is the only use I have seen for the DPY.
Formerly ~DC:UK~
marv0083
T68 gold
Joined: Aug 12, 2007
Posts: 48
PM
Posted: 2008-01-17 02:00
Reply with quoteEdit/Delete This PostPrint this post
I'm from the Philippines

can I use FW 38 for my phone? I'm itching to try because I'm experiencing some bugs right now
fullforce
Satio Red
Joined: Oct 12, 2005
Posts: > 500
From: Sweden
PM
Posted: 2008-01-17 02:46
Reply with quoteEdit/Delete This PostPrint this post
Where did you get that the superduperturbomega-firmware will be relased the 20:th of jan? I'm really looking forward to something that fixex my bugs and is a lot better then the -38 firmware!
lun4r
K850 Green
Joined: Jan 15, 2008
Posts: 72
PM
Posted: 2008-01-17 03:15
Reply with quoteEdit/Delete This PostPrint this post
lets just wait n see what SE can offer to us on 20th of Jan (hopefully the date is correct since SE websites only mention January 2008, not the date =p)
lun4r
K850 Green
Joined: Jan 15, 2008
Posts: 72
PM
Posted: 2008-01-17 03:27
Reply with quoteEdit/Delete This PostPrint this post

On 2008-01-16 11:55:29, oracle86 wrote:

I'm starting to think I was better off with my k750i :S



Relax bro, that's what SE always doin on their first fone release, even with the great n legendary ol' k750i...

i bought one about 2.5 years ago (few weeks after it was released) and what happened? it hangs frequently and randomly restarts itself that i have to trade it 3 times and perform FW update twice to make it the better fone until now...

who knows, after few decent updates (just like the k750i), the k850i will become another legendary SE fone, we'll just wait n see
Access the forum with a mobile phone via esato.mobi
Previous  123 ... 111112113 ... 695696697  Next
Goto page:
Lock this Topic Move this Topic Delete this Topic