| Author |
Widcomm Bluetooth problems |
wrath000
Joined: May 14, 2003
Posts: > 500
From: Norway
PM |
Try reading through this. See if it's any help.
Also, remember to activate only the COM port the phone is connected on in MPM, otherwise MPM gets sometimes confused and doesn't find the phone.
If you have never ran XTNDConnect before, open the serial port to the phone manually before running the sync.
You can also try downloading the most recent version of the communication suite, if you don't already have one. (You'll find a link to it in the thread I mentioned above)
_________________
If I had all the answers, I wouldn't have any questions. 
Answers to the most common questions on Esato forums
[ This Message was edited by: wrath000 on 2003-11-01 21:26 ] |
|
|
SP4RK
Joined: Oct 30, 2003
Posts: 12
PM |
what a headache. thanks for your help,
I've isolated the correct port and got XTNDConnect synching my contacts but still i cant get Floats Mobile Agent to connect, even when i connect via XTND first, i get the same error.
I pray for a magic patch that will fix this  |
SP4RK
Joined: Oct 30, 2003
Posts: 12
PM |
hmm, i've managed to get everything to connect except float's program, could it be something to do with the device address, I've put it in correctly but still the errors. Is there a way to update and get a new address? |
SP4RK
Joined: Oct 30, 2003
Posts: 12
PM |
sorted
I simply chose serial connection with the correct port rather than bluetooth connection and it worked, what a plank.
Cheers everyone |
|
|
Posted: 2003-11-01 22:25
