| Author |
Tough-shot v7.3.9 by Adolf Vicious for K850i |
corer
Joined: Jan 04, 2009
Posts: 53
PM, WWW
|
On 2010-03-01 12:33:21, dc26919568 wrote:
Used the "super EM mode"....think it is in the english manuel (orginal breach and snow mode)
though the respond will become reli slow in this mode, but it gives a very long exposure time and uses the base ISO that it gives this pic 
increased ev +0.3 to 0.7 (should be shutter speed in actually)
....never use the twilight mode, it do not focus..... 
[ This Message was edited by: dc26919568 on 2010-03-01 11:37 ]
well..actually they're nothing different but AF.
um..ev is not shutter speed control~ when u select "off" in two manual menus, it'll turns out to be AE lock.
| |
|
dc26919568
Joined: Feb 27, 2010
Posts: 45
PM |
On 2010-03-01 16:27:09, corer wrote:
On 2010-03-01 12:33:21, dc26919568 wrote:
Used the "super EM mode"....think it is in the english manuel (orginal breach and snow mode)
though the respond will become reli slow in this mode, but it gives a very long exposure time and uses the base ISO that it gives this pic
increased ev +0.3 to 0.7 (should be shutter speed in actually)
....never use the twilight mode, it do not focus.....
[ This Message was edited by: dc26919568 on 2010-03-01 11:37 ]
well..actually they're nothing different but AF.
um..ev is not shutter speed control~ when u select "off" in two manual menus, it'll turns out to be AE lock.
 Hum.....I turned on the EV control in the menu~  |
bluechip
Joined: Jun 09, 2009
Posts: 477
PM |
On 2010-03-01 16:47:03, dc26919568 wrote:
On 2010-03-01 16:27:09, corer wrote:
On 2010-03-01 12:33:21, dc26919568 wrote:
Used the "super EM mode"....think it is in the english manuel (orginal breach and snow mode)
though the respond will become reli slow in this mode, but it gives a very long exposure time and uses the base ISO that it gives this pic
increased ev +0.3 to 0.7 (should be shutter speed in actually)
....never use the twilight mode, it do not focus.....
[ This Message was edited by: dc26919568 on 2010-03-01 11:37 ]
well..actually they're nothing different but AF.
um..ev is not shutter speed control~ when u select "off" in two manual menus, it'll turns out to be AE lock.
Hum.....I turned on the EV control in the menu~
So u used the EV/Shutterspeed + Beach/Snow mode to take these pics... ?
|
bluechip
Joined: Jun 09, 2009
Posts: 477
PM |
Hi corer,
Just a simple request, could you please increase the default ISO from 64 to something like
80 or so..?
I am getting darker photos in non flash shots.
|
corer
Joined: Jan 04, 2009
Posts: 53
PM, WWW
|
On 2010-03-01 20:31:35, bluechip wrote:
Hi corer,
Just a simple request, could you please increase the default ISO from 64 to something like
80 or so..?
I am getting darker photos in non flash shots.
then how about ISO100?
ISO80 makes little difference from ISO64~
well..I made u a special vr. here with auto flash & forced RER flash , default ISO80/100
[ This Message was edited by: corer on 2010-03-02 09:33 ] |
dc26919568
Joined: Feb 27, 2010
Posts: 45
PM |
On 2010-03-01 18:07:50, bluechip wrote:
On 2010-03-01 16:47:03, dc26919568 wrote:
On 2010-03-01 16:27:09, corer wrote:
On 2010-03-01 12:33:21, dc26919568 wrote:
Used the "super EM mode"....think it is in the english manuel (orginal breach and snow mode)
though the respond will become reli slow in this mode, but it gives a very long exposure time and uses the base ISO that it gives this pic
increased ev +0.3 to 0.7 (should be shutter speed in actually)
....never use the twilight mode, it do not focus.....
[ This Message was edited by: dc26919568 on 2010-03-01 11:37 ]
well..actually they're nothing different but AF.
um..ev is not shutter speed control~ when u select "off" in two manual menus, it'll turns out to be AE lock.
Hum.....I turned on the EV control in the menu~
So u used the EV/Shutterspeed + Beach/Snow mode to take these pics... ?
Exactly, U are right~ |
dc26919568
Joined: Feb 27, 2010
Posts: 45
PM |
On 2010-03-02 05:35:04, corer wrote:
On 2010-03-01 20:31:35, bluechip wrote:
Hi corer,
Just a simple request, could you please increase the default ISO from 64 to something like
80 or so..?
I am getting darker photos in non flash shots.
then how about ISO100?
ISO80 makes little difference from ISO64~
well..I made u a special vr. here with auto flash & forced RER flash , default ISO80/100
[ This Message was edited by: corer on 2010-03-02 09:33 ]
Anyway, I did found a some how strange bug in this camera mod:
**All special function menu 's function gone(無效左not function)....after the image stabilization is on....
And it is possible to have all the setting remains after log off the camera or have the following config as default which it always take good picture for just point and shot:
(in special menu)
ISO = +0.3 ev (auto)
Contrast = +o.3 ev
Sharpness = Max
White balance = +2.00EV (Real Color tm)
Thx
PS to blueclip, it is better to have night shot @ iso 64
and @ a place with enough light, stick to the lowest possible ISO is always the best
So I think it would be best for us to hv base ISO at normal mode iso 100 & iso64 @ snow& beach mode
Actually, I used to play with my DSLR instead, so maybe I am a bit too requiring
Further more 原來 adolphvicious = corer 大大
你的改做是最好的^^
more com, : still a bit yellow under slow sync. flash
while a bit blue under high-speed sync. flash
To ans ur question, AF is quite important @ night shots (DOF does matter)
[ This Message was edited by: dc26919568 on 2010-03-02 15:55 ] |
corer
Joined: Jan 04, 2009
Posts: 53
PM, WWW
|
@dc26919568:
what?
lose effectiveness?
That haven't happen to mine up till now....thinkin flash it again?
|
bluechip
Joined: Jun 09, 2009
Posts: 477
PM |
On 2010-03-07 05:58:51, corer wrote:
@dc26919568:
what?
lose effectiveness?
That haven't happen to mine up till now....thinkin flash it again?
@corer,
Just downloaded your new 7.3.9, havn't tested yet.
But i am not able to read the readme file... could you make an English file for that...
|
bluechip
Joined: Jun 09, 2009
Posts: 477
PM |
not able to use your patch file...
getting errors...
|
corer
Joined: Jan 04, 2009
Posts: 53
PM, WWW
|
@bluechip
updates written on the 1st page now~
i'm sorry but the patch is for R1FA035_APAC only....
[ This Message was edited by: corer on 2010-03-07 08:29 ] |
bluechip
Joined: Jun 09, 2009
Posts: 477
PM |
On 2010-03-07 09:27:55, corer wrote:
@bluechip
updates written on the 1st page now~
i'm sorry but the patch is for R1FA035_APAC only....
[ This Message was edited by: corer on 2010-03-07 08:29 ]
APAC----???
So i cannot use your new menu...?
|
norbi1988
Joined: Nov 20, 2008
Posts: 144
From: Poland
PM |
@corer plz convert it to generic |
dc26919568
Joined: Feb 27, 2010
Posts: 45
PM |
On 2010-03-07 08:42:13, bluechip wrote:
On 2010-03-07 05:58:51, corer wrote:
@dc26919568:
what?
lose effectiveness?
That haven't happen to mine up till now....thinkin flash it again?
@corer,
Just downloaded your new 7.3.9, havn't tested yet.
But i am not able to read the readme file... could you make an English file for that...
 It is a China simple readme, let me have it google translate for U la
Compression packages are in Chinese and English menu language file, brush into tpa / preset / system / language, to ensure the correct Please backup the original machine language file into the brush. R1FA035 the Originals also included the original machine language file.
************************************************** ************************************************** *********************************
v7.39 changelog:
White balance lock (ie, custom white balance ★)
Moonlight mode (for shooting the moon, clear night sky)
Fixed ISO64 (previously may become ISO80)
Color Optimization
Focus more accurate
Several bug fixes, the previous version
The new language file and the new patch file (to replace the camera icon in the menu and to increase the auxiliary grid lines: Press "0" key use)
★ About Custom White Balance:
This white balance in different places have different names, they describe the cases of some common light white balance settings. In general, users need to white balance the camera pointed out that the reference point, that is, the screen which a "white" object as white spots. But the question is what is "white", for example, the white will be different in different white, some white some may be slightly yellowish, and some white may be slightly biased white, and light will influence our "white" color, then the How to determine the "true white"? One way to solve this problem is to carry a standard white paper, shooting out to compare the Beishe Ti on the list. This method is very effective, it is difficult to shoot in indoor, in such settings, it may be under the "reference" White Set White Balance. In the absence of white, let the camera eye that is white alignment objects to adjust. ------------------------ Switched from Baidu Wikipedia TM
★ How to use: Select "white balance" so that the camera eye alignment of objects that are white, after adjustment, adjust white balance to +0.3 ev that lock. |
dc26919568
Joined: Feb 27, 2010
Posts: 45
PM |
On 2010-03-07 05:58:51, corer wrote:
@dc26919568:
what?
lose effectiveness?
That haven't happen to mine up till now....thinkin flash it again?
I will try your new version, see if I turn on the stabilizer, the Super function gone~
OMG, still gone.... 
Is it possible to use the attractive grid patch in HK version?
iso 64 auto WB + 色偏 -0.3ev+ contrast +0.3ev:
iso80 manual WB 色偏 -0.3ev+ contrast +0.3ev:
Slow syn flash iso100:
[ This Message was edited by: dc26919568 on 2010-03-07 14:43 ] | |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2010-03-01 16:27
