| Author |
(vFinal_rev5) AudioPhile Premium HD Acoustics for All A2 & UIQ3 Phones |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
What do you mean by "song aint so loud, only loud bass and treble, thats not really for me, I like them both loud"? 
What type of headphone did you use, and did you already try to use your own equalizer?
If there's too much bass or treble, you can always try lower the first bar and modify manual equalizer.
That's because manual equalizer is only optimized for HPM-85 (big-sized closed driver), so if you want, you can use your own equalizer 
Here's the style of each acoustic, compared with original W995:
1. Flat: No change on Bass and Treble. Only clarity, reverberation and frequency filter are altered.
2. Clear Crystallizer: Same as flat, but bass is lowered, treble and mids are raised.
3. Bomb Crystallizer: Same as flat, but mids is lowered, bass and treble are raised.
So I guess you're referring 'loud bass and treble' to #3? I don't use it, too. I prefer flat
But some people who listen rock music and has muffled IEM headphone like HPM-77 may likes #3...
And W910 doesn't has csv. You don't get louder volume, and sounds quality may be reduced on A2 first generation phones...
Everyone has different taste and opinions. Thanks for your review, anyway. Really appreciate it.
Hiron
[ This Message was edited by: Hiron on 2009-09-02 22:35 ] |
|
|
ravihpa
Joined: Sep 03, 2009
Posts: 3
PM |
Hi,
I read your post and the readme file that came with the download. I have a w595 phone and wanted to know whether its second generation A2 phone or first generation A2 phone. I will still keep on searching and googling about this question, but would be better if you replied whether it would work on a w595 or not.
Thanx a lot in advance. Desperately waiting for a reply |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
W595 is a second generation A2.. You can upload wbxml, csv and xml.. You may also use your own equalizer setting
Hiron |
nitrounit
Joined: Apr 10, 2008
Posts: 96
PM |
will try this again since you updated
|
mrjulius
Joined: Jun 19, 2009
Posts: > 500
From: Pleasant Hills, Manila
PM, WWW
|
@hiron
do you updated to the quality in mps 70 speaker
 Xperia Arc S, AinoU10i, x10m, c902, k750i,  |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
@mrjulius,
The quality of mps speaker doesn't changes. My acoustic only has an effect in handsfree..
@all,
Let me know your opinion
Hiron |
mrjulius
Joined: Jun 19, 2009
Posts: > 500
From: Pleasant Hills, Manila
PM, WWW
|
@hiron
3 choices are there
i choose bass
and what about the other two
csv and xml
they i should put also?
Xperia Arc S, AinoU10i, x10m, c902, k750i, |
masada1971
Joined: Jun 05, 2008
Posts: > 500
PM |
thanks for your efforts...which mod acoustics should work with my c905??thanks again... |
daviep
Joined: Apr 04, 2005
Posts: > 500
From: bonnie scotland
PM |
what of your acoustics works best in my c905?
galaxy note8 |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
@mrjulius,
upload csv and xml if your phone is c902. Choose megabass or manual equalizer. If you think there's too much bass, lower the first bar of equalizer, or you can try other wbxml like Clear and Loud
@masada and daviep,
Three of them should work fine with c905. 1. Clear has best clarity, 2. Loud is very loud and 3. Bass has very good bass while still has good clarity... Upload csv and xml, too. My personal favorite is Bass
Hiron |
mrjulius
Joined: Jun 19, 2009
Posts: > 500
From: Pleasant Hills, Manila
PM, WWW
|
@hiron
your acoustic is so good
i like the bass
my feedback in mps70
yeah it has effect but the volume is so low
i can hear it, putting the speakers in my shoulder heheh
[ This Message was edited by: mrjulius on 2009-09-11 19:39 ] Xperia Arc S, AinoU10i, x10m, c902, k750i, |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
Your mps speaker sounds different after uploading my acoustic? I thought it was controlled by line_out.wbxml... Are you sure?
Or maybe you're using 3.5mm jack converter? If it's true, I'm sorry I can't raise the volume on mps speaker, because I don't have it (so I can't test it) xD
Hiron |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
@hiron: the mps70 connects directly to the fastport.
|
bhuvangaur
Joined: Sep 11, 2009
Posts: 4
From: india
PM, WWW
|
hey HIRON
i loved ur hard work and efforts!
hats off!
this is the best i found till date for a2 phones!
will surely regulate at my forum
but one thing
i had w580 earlier and few more db2020s
i have w880 extreme in them...and i love the volume level
i am not comparing them but if u can increase the max volume level in BEST BASS ones
i would have loved it!
u rock!
BHUVAN
|
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
@tranced,
Sorry, I mixed it up with MMC-60. He said that the volume is too low so I thought that the volume can't be raised or lowered and no equalizer used, which is exactly happened in MMC-60.
MMC-60 connect to fastport, too. But it's controlled by line_out.wbmxl, so when you change the volume, the phone just says "accessory does not support volume control." Equalizer doesn't works as well
Btw, could you give me some feedback? Now I don't have an idea for a new version, and I need some suggestion
@bhuvangaur,
I'm sorry, raising it furthermore can makes some distortion... In fact, it's already louder than original a2 acoustic... And wbxml could never be louder than apf or zapf acoustic
If you want louder version, try "2. Loud," but it doesn't sound like "3. Bass" because no internal equalizer applied to prevent distortion while still maximizing the volume
Hiron
[ This Message was edited by: Hiron on 2009-09-12 00:51 ] |
|
|
Posted: 2009-09-02 23:33
Xperia Arc S, 
