Author |
K850 Firmware Overview |
Supa_Fly Joined: Apr 16, 2002 Posts: > 500 From: Toronto, Ontario PM, WWW
|
UPDATE of R1F ....
I still cannot get MMS. Here's the breakdown.
1. It worked for 5days with this firmware until last Saturday then nothing Cannot Send/Receive.
However, yesterday & today ... (since my no more MMS issue on Rogers) I've Master Reset>Settings (today Master Reset ALL) and now my lovely K850i with themes still on M2 after the reboot defaults to the SE Crystal (I think).
26MB Memory Free. (Rogers Firmware I had 33-36 if I purged some pics)
I'm now on a new SIM, 400 series. older one was some 203040 series.
Purged settings, Resent myself maybe 5 times on Saturday, Sunday - Powercycled removed batt some 10times thus far. Resent settings from SE's Phone Support site (tech's did too 4 times today) and re-enabled MMS on the switch to NO AVAIL! Transfered the newly activated SIM in a Nokia 6020 and MMS send/received worked (also Rogers Branded). Back in my phone NOTHING. MMS icons show GREY-faded, yet SMS is the normal Yellow.
If I open the grey MMS it tries to auto download (yes Message Settings are set). Cell Info=ON, Allow PUSH=Yes, Area Info=ON. SO what the frak?! I cannot say its the firmware because it worked for more than 5days with teh new firmware. So I'm inclined to think that MMSC or something on the switch that ppl are overlooking is screwed up.
OH of note!!!: If you MASTER RESET ALL > and try the SE Setup Wizard to Grab Settings automatically (used to fined SEMC for Data, MMS, Videotron for GPRS), it WON'T WORK!!! It doesn't try past 1 full second reporting an Error. Also SE's site is NOT sending me settings, and its ticking me off something proper.
|AppleTV2|iPhone 12Mini 256GB|iPad Pro 256GB| Previously ...  K750|Z500|Z520|K700|K790i|K850i, :Ericsson: T18z|T28World|T36m x3|T68m (Ericsson, not the rebranded  T68i). |
|
obentou Joined: Sep 19, 2005 Posts: 364 From: Toronto PM |
If the touch buttons stop working, it means the PCB responsible for detecting the changes went kaput. Purchase a new PCB and you'll be OK  |
sniper_supra Joined: Feb 16, 2008 Posts: 266 PM |
On 2008-07-01 01:57:06, vax-vanson wrote:
On 2008-07-01 00:16:21, Duran wrote:
On 2008-06-30 20:33:10, 0kti wrote:
On 2008-06-30 19:39:17, achen23 wrote:
Does R1F SEUS new firmware is BROD Free?
Is this confirmed?
3 people in Poland have BROD in r1fa035 firmware strange
one of them just insert SIM card from another network - boom BROD
one of them just end the call with his girlfriend
one of them - i don't remeber
all in r1fa035 firmware, and only effects people of Poland
i'm also from Poland and i don't have any reboot
source?
Source?
Why such a mistrust?  ))))
Is this for real?
o_O |
cgmiki Joined: Dec 19, 2005 Posts: 31 PM |
On 2008-07-01 01:57:06, vax-vanson wrote:
Source?
Why such a mistrust?  ))))
Excellent.
Great work mate.
[ This Message was edited by: cgmiki on 2008-07-01 09:17 ] |
Supa_Fly Joined: Apr 16, 2002 Posts: > 500 From: Toronto, Ontario PM, WWW
|
On 2008-07-01 06:51:44, obentou wrote:
If the touch buttons stop working, it means the PCB responsible for detecting the changes went kaput. Purchase a new PCB and you'll be OK
My touch buttons are just fine - might be someone else though .. good tip.
|AppleTV2|iPhone 12Mini 256GB|iPad Pro 256GB| Previously ...  K750|Z500|Z520|K700|K790i|K850i, :Ericsson: T18z|T28World|T36m x3|T68m (Ericsson, not the rebranded  T68i). |
darknoob Joined: Feb 26, 2007 Posts: > 500 PM |
guys, are there any risks to update my K850 via SEUS?
I read people got BROD because they updated through it.
someone ? |
Luhccas-U1a Joined: Mar 24, 2008 Posts: > 500 PM, WWW
|
10 days and still with no one problem... |
saadthebest Joined: Apr 11, 2008 Posts: 7 PM |
On 2008-07-01 06:51:44, obentou wrote:
If the touch buttons stop working, it means the PCB responsible for detecting the changes went kaput. Purchase a new PCB and you'll be OK
what do you mean by PCB ?? |
Duran Joined: Aug 25, 2006 Posts: > 500 From: Netherlands PM |
On 2008-07-01 16:39:41, saadthebest wrote:
On 2008-07-01 06:51:44, obentou wrote:
If the touch buttons stop working, it means the PCB responsible for detecting the changes went kaput. Purchase a new PCB and you'll be OK
what do you mean by PCB ??
http://en.wikipedia.org/wiki/Printed_circuit_board |
SupermansZ24 Joined: Jun 04, 2008 Posts: 51 From: Toronto PM |
Prom1 - Are you using the k850i MMS settings sent by SE?. If so, use the W580i settings, I had the same problem just recently |
puestadelsol Joined: Mar 29, 2007 Posts: 310 PM |
Is there any chance for waiting the R3 firmware with an updated camera driver? At least in july? |
mark187 Joined: Nov 17, 2007 Posts: 102 From: UK PM |
On 2008-07-01 18:14:34, puestadelsol wrote:
Is there any chance for waiting the R3 firmware with an updated camera driver? At least in july?
Nobody knows and anyone who tells you they do, are lying. |
obentou Joined: Sep 19, 2005 Posts: 364 From: Toronto PM |
Hmm, the PCB doesn't look as complicated as that, this is what you will actually be buying if you were to fix it:
http://cgi.ebay.ca/Original-P[....]QcmdZViewItem#ebayphotohosting
|
vortigern Joined: Dec 10, 2007 Posts: 60 From: London PM, WWW
|
I'd be very suprised if there's any more firmware after this one.... as the guy from voda says.."the K850 is at the end of its life now"
throw it in the bin and write it off as a bad purchase & never trust SE again. |
dante_sparda Joined: Oct 09, 2007 Posts: 63 From: Bucharest, Romania PM |
Guy's .. about R3 firmy from C902 - look what SE responded to me..
"Also, we want to inform you that using the service Updates Sony Ericsson, install mobile phone Sony Ericsson K850i a version of softare new, improved, which resolves any defective software in the phone. However, the updated software does not bring mobile phone Sony Ericsson K850i features of another mobile phone differently."
^^ using Google Translate.
I don't think we can get on K850 those new features like C902 has (via update, except XS++), but we will get improvement on UI speed, camera driver (fixed red/pinkish issue) and removing other issues.. with next f/w's. |
|