| Author |
(vFinal_rev5) AudioPhile Premium HD Acoustics for All A2 & UIQ3 Phones |
fe1ixs
Joined: Sep 25, 2009
Posts: 55
PM |
On 2009-11-23 21:43:53, volume100 wrote:
On 2009-11-23 20:45:34, fe1ixs wrote:
@hiron
just test your Vx version. Stereo widening & bass definitely better and louder.
But I think the bass a bit too much; I found it distorted when playing some songs. I use standard ipod earphone + amplified + megabass for non-clear audio.
Thanks.
Did you try to manually lower the bass using the equalizer? 
@volume100
No, I did not. I will try to adjust manually.
@hiron
Found another bugs on Vx. the system hang & restart while playing songs on C905. It happened several times a day.
I haven't notice anything like this in your earlier version.
|
|
|
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
@fe1ixs,
Bass is distorted? Choose only one of these solution:
1. Lower the volume
2. Reduce first bar
3. Use "Normal" wbxml instead of "Amplified"..
4. Switch to a bigger headphone..
I thought no.4 is the recommended solution, because it can be the hardware limitation of your headphone.. I didn't find any distortion with my HPM-82.. 
About c905 got restart, I thought an acoustic driver can't make your phone unstable..
Your FileSystem could be corrupted because of frequent copy paste by a2uploader.. If you use your usb flash drive very often, it could be corrupted, isn't it?
For solution, reupdate with seus or reflash with uploader, then reupload my acoustic.. It should be fine.. I had experienced it once
Hiron |
geokilla
Joined: Apr 01, 2009
Posts: 77
PM |
@Hiron. I'm still on V9.X and I can't for some freaken reason get a good in-ear HPM-70 headset to sound like the sound that I get from my speakers. Only the HPM-64 can deliver a similar sound quality for some odd reason. The rest of the HPM-70 and HPM-75 headset, which my friend mixed and match so now I have the faintest idea of which headset belongs to which, sound like they don't have enough bass and sound terrible.
Anyways, what equalizer setting would you recommend for HPM-64 with W715? I currently have +3 Clear Bass, -1 400Hz, -1 1kHz, 1 6.3kHz, and 1 16kHz. Which I believe is written as full clear bass | +1 | +1 | 0 | +1 | +1 |.
Also, I have some Sennheiser CX-300 coming in, but I'm looking to get a legit HPM-77 somewhere. I only know of eBay which means there's a high chance of getting a fake one. Can anyone direct me where to get the HPM-77? Reason why I won't be using the Senns is because I don't want to have wires all over my body.
Sony Ericsson G705 --> W715 |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
I thought it would be | -1 | -1 | 0 | +1 | +1 |
Btw, what version did you use?
For "Normal", I recommend Full ClearBass and | 0 | 0 | 0 | 0 | +1 |
For "Amplified", I recommend Full ClearBass and | +2 | +2 | +1 | 0 | 0 |
Although it depends on your taste... Just experience it yourself to find the best possible listening experience
Hiron |
geokilla
Joined: Apr 01, 2009
Posts: 77
PM |
Ya that's what I meant.
I'm going to upload your new version tonight and will try your recommended settings.
Edit: Don't know why, but the new A2Uploader I'm using won't let me upload files. Posted on SE-NSE and they're saying it could be my computer. However, the older version works fine for the most part...
[ This Message was edited by: geokilla on 2009-11-25 05:25 ] Sony Ericsson G705 --> W715 |
Rajneesh17
Joined: Nov 07, 2009
Posts: 77
From: New Delhi, India
PM, WWW
|
@ Hiron 
Thanks for the Latest vX version.
I'm liking it. 
Please help me in selecting better earphones. I' have HPM-70 now but want to update for a better one. I have C510.
Please suggest some better earphones around Rs.1000( indian currency) which is equivalent to 20 US Dollars.
Thanks.
Rajneesh Gadge
[ This Message was edited by: Rajneesh17 on 2009-11-26 10:34 ] C510@W715(main)+C903(FS) + Clear Audio + Patches + My Modifications + Sennheiser CX180. |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
Sennheiser cx-100, cx-300.. Assuming that you has fastport to 3.5mm jack adapter |
groovepeppy
Joined: Dec 05, 2007
Posts: > 500
From: Parijs van Java, Indonesia
PM |
@hiron
After listening to your 'amplified' version for sometime i think it would be nicer if you could lower the hiss a bit more.
Just an opinion
Black Sensation Z710e - Black Apollo 9360 |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
The hiss was the consequences of the increased volume... If I reduce the hiss, the volume is reduced, too... Recommended to not listen more than 7.5 bar... I will tr to reduce the hiss while still keeping the same volume
Hiron
|
idumbakumar
Joined: Oct 01, 2007
Posts: > 500
From: chennai,india.
PM |
nice work. hiron.. the driver and CSV much matured now.. good wotk..
the volume normalisation is perfect now...
like the amplified and loud CSV.. though i dint test the normal CSV and drivers..
i was on a intermittend vacations and travel... so sorry for the late response.
thanks a bunch... |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
Finally you come back... New beta is in the pipeline, although this time only a bugfix  |
idumbakumar
Joined: Oct 01, 2007
Posts: > 500
From: chennai,india.
PM |
On 2009-11-27 13:40:47, Hiron wrote:
Finally you come back... New beta is in the pipeline, although this time only a bugfix
ya i came back... i'm glad to test it.. |
mrjulius
Joined: Jun 19, 2009
Posts: > 500
From: Pleasant Hills, Manila
PM, WWW
|
@hiron
keep up the good work
i like your acoustics
 Xperia Arc S, AinoU10i, x10m, c902, k750i,  |
FalconerHUN
Joined: Nov 28, 2009
Posts: 11
From: Budapest, Hungary
PM |
Hey guys,
First of all congrats for the great work! Second, is here anyone who knows how this thing works on UIQ3? I would need some help
First of all, I installed a complete w715 sound pack on my M600i, and then this Audiophile thing (renamed to .aat, etc, note: there is no Lineout.aat by default on UIQ3), which seems to work perfectly. I did everything using SwissManager Pro. Even though the folder structure is completely different then in this readme, so that's what I did:
1. mmmgmtserver.exe from Z-sys-bin to C-sys-bin
2. M3SAudioPolicyMgr.dll from the same place patched, and copied to C-sys-bin
3. Then a lot of AAT files copied to C:\\private\\10200B19\\AATFiles\\ which is the folder for acoustics in UIQ3 phones (the default is on Z tho).
The quality improvement was significant, and the volume improvement as well.
Now my problem: I did the same on my new W960, and it doesn't seem to work, even tho I double then triplechecked everything.
- When I try to delete the AAT files it says I cannot do it, because they are in use (even tho I can't here any difference)
- Then I deleted the patched M3SAudioPolicyMgr.dll file from C-sys-bin, bacause I thought it was the file that tells the system to use the added AATfiles folder. This worked on my M600, after reboot I was able to delete the complete mod (the aat files folder from C), but not on my W960! It still says that these files are in use! Why??? How can I delete them?
As a solution I tried to access the file system with XS++ 3.1, but this doesn't work either (no matter which phone). It can access the phone, it can save the GDFS, whatever, but cannot access the file system...
So do you guys know any computer program that I can access the phone with without turning it on? So without having the new AAT files in use. I really want to have it on my W960!!! )
Thanks for the help in advance!
|
groovepeppy
Joined: Dec 05, 2007
Posts: > 500
From: Parijs van Java, Indonesia
PM |
good morning
i'm trying your normal xV and i guess i'll be sticking on this one now since it was better for my ears than the amplified
peri peri gud werk 
Black Sensation Z710e - Black Apollo 9360 |
|
|
Posted: 2009-11-24 04:27
Xperia Arc S, 
