Esato

Forum > Sony Ericsson / Sony > Software, Firmware and Drivers > K700 online update service is back up!

Previous  123 ... 101112 ... 484950  Next
Author K700 online update service is back up!
Spitfire
P1
Joined: Sep 11, 2003
Posts: 135
From: Sweden
PM
Posted: 2004-09-18 10:59
Reply with quoteEdit/Delete This PostPrint this post
no tath dosen't work i opend comport 15 that it says but same problem
T310,Z600,T630 (Black),K700,P900, K750i,W850,P1,IPHONE(current)
zordon
T68 gold
Joined: Sep 17, 2004
Posts: 19
PM
Posted: 2004-09-18 11:03
Reply with quoteEdit/Delete This PostPrint this post
tom78999

Well i turned out that Java was the problem, The Sun Vm did will not install correctly. I managed to find the MS version, and use this and got further.

Thanks
Spitfire
P1
Joined: Sep 11, 2003
Posts: 135
From: Sweden
PM
Posted: 2004-09-18 11:07
Reply with quoteEdit/Delete This PostPrint this post
wearh did you finde it maby i got the same problem ?
T310,Z600,T630 (Black),K700,P900, K750i,W850,P1,IPHONE(current)
ramstad
W880 Black
Joined: Sep 18, 2004
Posts: 14
PM
Posted: 2004-09-18 11:52
Reply with quoteEdit/Delete This PostPrint this post
When I plug my DSS-20 in my USB port, it is recognized as DCU-11!
And WinXP install its own driver for the DCU-11. (I don't get the option to install the DSS-20 driver)

I think this is the reason that I get the "Fatal error" message when i try to run the update service!??

Are there someone out there who can tell me what your DSS-20 are installed as?

And maybe some tips to get the updateservice work??
tom78999
K700
Joined: Sep 16, 2004
Posts: 61
From: Wirral, Merseyside, UK
PM
Posted: 2004-09-18 12:01
Reply with quoteEdit/Delete This PostPrint this post
My DSS-20 is listed in Windows XP Device Manager as "SEMC DSS-20 SyncStation (COM5)"

Maybe you should try downloading the DSS drivers, and then when re-installing specifying the location of the drivers instead of letting XP try and find them?

EDIT: Oops, you say you can't specify the driver, thats strange. Hmmm, have you tried manually installing the DSS-20 drivers once its plugged in, etc.

[ This Message was edited by: tom78999 on 2004-09-18 11:01 ]

[ This Message was edited by: tom78999 on 2004-09-18 11:03 ]
ramstad
W880 Black
Joined: Sep 18, 2004
Posts: 14
PM
Posted: 2004-09-18 12:15
Reply with quoteEdit/Delete This PostPrint this post
Yes I have tried that, but it still are named DCU-11.
I have checked on SE, and looked at pictures of devices from SE, and I cant find other syncstations than DSS-20, wich looks like mine!

The label on my DSS-20:
KRY 105 183 R1B
Type 4040034
02W52

Strange!!!
tom78999
K700
Joined: Sep 16, 2004
Posts: 61
From: Wirral, Merseyside, UK
PM
Posted: 2004-09-18 12:51
Reply with quoteEdit/Delete This PostPrint this post
Very similar label to mine:

DSS-20
KRY 105 189 R1A
4040034B
03W15

Have you tried completely uninstalling and re-installing with the driver disc in or something. :-S
dahlborg
K700
Joined: Aug 19, 2004
Posts: 8
From: Sweden
PM
Posted: 2004-09-18 13:11
Reply with quoteEdit/Delete This PostPrint this post
Quote:

On 2004-09-18 12:15:44, ramstad wrote:
The label on my DSS-20:
KRY 105 183 R1B
Type 4040034
02W52



Does it say DSS-20 or just the other characters you wrote.
If it doesn't say DSS-20 there's a great chance that it isn't a DSS-20 but a DCU-11 with a deskstand, delivered with the early p800.
There should be a link about this somewhere, I'll see if I can find it.

Edit: Well Here's the link

[ This Message was edited by: dahlborg on 2004-09-18 12:14 ]
ramstad
W880 Black
Joined: Sep 18, 2004
Posts: 14
PM
Posted: 2004-09-18 13:13
Reply with quoteEdit/Delete This PostPrint this post
Yes I have tried every possible ways.
Uninstalled and installing in all sorts of ways.
But anyway I don't understand why i got the message "Fatal error" when I try to uppdate my K700 FW.
When my DSS-20 are connected I can syncronize my telephonelist, send & receive pictures and sounds, so it isn't that the PC don't find the device!
I'm confused, f...ing big confused!!!!
demon-knight
K750
Joined: Aug 31, 2004
Posts: 15
PM
Posted: 2004-09-18 13:25
Reply with quoteEdit/Delete This PostPrint this post
What if i were to put an orange sim in my o2 phone and tried to flash would that work do you think?
buckle247
K700
Joined: Jan 02, 2003
Posts: > 500
From: UK: OXON
PM, WWW
Posted: 2004-09-18 13:38
Reply with quoteEdit/Delete This PostPrint this post
Welcome to esato
your idea won't work though because it would still be O2 firmware on the phone, the firmware is stored on the phone, not the sim card.

tom78999
K700
Joined: Sep 16, 2004
Posts: 61
From: Wirral, Merseyside, UK
PM
Posted: 2004-09-18 13:45
Reply with quoteEdit/Delete This PostPrint this post
@ramstad

have you tried re-installing the java runtime environment, or upgrading if you have an old version
Jools
C510 Black
Joined: May 21, 2003
Posts: > 500
PM
Posted: 2004-09-18 13:51
Reply with quoteEdit/Delete This PostPrint this post
Hmm... can anyone assist me with installing the DSS-20 drivers. I bought this item yesterday which claims to be a DSS-20. On the bottom is written:

Sony Ericsson
KRY 105 183 R1B
Type 4040034
03W01

I downloaded the drivers as recommended by SE from here or directly here.

I unzipped them to the desktop, and then plugged in the DSS-20. Up popped the Add New Hardware Wizard. But then it gets stuck. It sees the USB device but can't locate the drivers to install. I've tried directing the Wizard to the unzipped drivers folder on the desktop but it insists there are no drivers there. I've pointed it at the two .inf files (SonyEricssonDSS.inf and USBSerialPort.INF) and it says they don't contain any information about my device.

What's going on? How the hell do I install these drivers? Does anyone have any alternative drivers that come with an installer? I tried the SyncStation installer that was on the K700i PC Suite CD-ROM but that doesn't work either (it appears to install but the DSS-20 isn't usable).

The only driver that I have been able to find that will install at all is the DCU-11 driver from http://www.sonyericsson.com/downloads/usb_driver_dcu11.zip which then happily identifies the device as a USB Cable DCU-11 (COM3) in the Device Manager.

Have I been sold something that isn't actually a DSS-20?
demon-knight
K750
Joined: Aug 31, 2004
Posts: 15
PM
Posted: 2004-09-18 13:54
Reply with quoteEdit/Delete This PostPrint this post
any updates on the whole o2 problem?
tom78999
K700
Joined: Sep 16, 2004
Posts: 61
From: Wirral, Merseyside, UK
PM
Posted: 2004-09-18 14:09
Reply with quoteEdit/Delete This PostPrint this post
demon-knight

No update on the O2/Vodafone problems yet, and we probably won't get anything new this weekend anyway.

JoolsG3

This sounds like the problem ramstad is having. That definately is the DSS-20 though, exactly the same as mine - even with the hole for holding the stick on the P800. Very strange that it won't recognise the drivers you downloaded as thats exactly what I did. In fact I was just this minute able to uninstall the device, plug back in, and xp set it up automatically because the drivers are installed. Strange - is this a common problem, have you tried a search.

EDIT: just had a quick search and if it doesn't say DSS-20 on the bottom then it could just be a modified DCU-11. And i don't think you can use this to do the online upgrade. Refs:

http://www.esato.com/board/viewtopic.php?topic=65395
http://www.esato.com/board/viewtopic.php?topic=65164
http://www.esato.com/board/viewtopic.php?topic=51708

[ This Message was edited by: tom78999 on 2004-09-18 13:18 ]
Access the forum with a mobile phone via esato.mobi
Previous  123 ... 101112 ... 484950  Next
Goto page:
Lock this Topic Move this Topic Delete this Topic