| Author |
(vFinal_rev5) AudioPhile Premium HD Acoustics for All A2 & UIQ3 Phones |
volume100
Joined: May 30, 2005
Posts: 211
From: Sarajevo
PM |
I used Clear. I just updated my firmware so before I reinstall your drivers I'll pay a bit more attention to the default ones. Hopefully I'll notice the difference 
|
|
|
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
What phone and headphone did you use? Did you upload csv?
I use HPM-85, big-sized headphones, and there is clear differences in "1. Clear" and "3. Bass." But there is a little difference in "2. Loud", aside from the volume
Hiron |
volume100
Joined: May 30, 2005
Posts: 211
From: Sarajevo
PM |
Before the second time I uploaded acoustics I listened to certain songs on default drivers and than on your acoustics. There was slight difference mostly in realism of the sound. I did everything like in the instructions, so yeah csv file also.
I have C901 and the most basic headphones that came with the phone.
|
Bryan84
Joined: Mar 28, 2007
Posts: 334
PM, WWW
|
I am new to acoustic drivers. So this driver is no use if I only play my music on my C905 loud speaker?
My Personal Homepage
http://www.bryanchung.sg |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
@volume100, thanks for the info
@bryan84,
I'm sorry, but the answer is yes..
Hiron |
Bryan84
Joined: Mar 28, 2007
Posts: 334
PM, WWW
|
On 2009-09-28 00:19:28, Hiron wrote:
@volume100, thanks for the info
@bryan84,
I'm sorry, but the answer is yes..
Hiron
Alright thanks!
My Personal Homepage
http://www.bryanchung.sg |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
@Bryan,
you're welcome
@all, v4 is up. Rather than uploading customize_upgrade.xml, it's better to port this patch to your phone
;T700 SW-R3EA037-MAIN-CHINA
;Remove the limitation of the maximum (8) and minimum (-8) values in the manual equalizer
;© MaPkiZzz aka Vital
;(p) adekbiroe
10c3126c: EDD3 C046
10c312c4: 72D0 C046
Hiron |
idumbakumar
Joined: Oct 01, 2007
Posts: > 500
From: chennai,india.
PM |
Oh man there's an issue with phf_jack_play closedair version.its no longer stereo. One channel is routed to both the channels. So another channel is absent this issue is present only with mh700 Handsfree which has mic and call end buttons. This issues isn't present in normal 3.5mm headset. So please fix it. I'm sure
There are some parameters which controls channels equalization specifically for hpm700 and normal 3.5mm jack.
Btw: I did.nt test this behavior with open air version. I'll tell you tomorrow.
[ This Message was edited by: idumbakumar on 2009-10-06 17:47 ] |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
@idumbakumar,
HPM-77 and MH-700 shares exactly the same setting in play mode! It has difference in phf_jack_rec.wbxml but I didn't edit it...
Btw, had you tried to play a bit with a jack connection? Maybe tighten it or rotated it a bit? (both in phone and mic connection)... I remember experiencing that when my jack connection is somewhat not tight
If you still experience it, try to switch to original or OpenAir phf_jack_play to see whether the problem is resolved. If it's resolved, then I couldn't understand what had happened.. Just use original jack wbxml or listen with fasport while I trying to figure out what had happened..
Hiron |
geokilla
Joined: Apr 01, 2009
Posts: 77
PM |
Version 4.0! Too bad I dunno how to patch phones haha. I'll try them out later, if I'm still using a W715.
Sony Ericsson G705 --> W715 |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
@geokilla,
And now v5.0 is up 
I jump so far (from 4 to 5) because now csv is much louder, and there are more information to get extreme manual eq patch
Hiron |
volume100
Joined: May 30, 2005
Posts: 211
From: Sarajevo
PM |
I just downloaded the latest version, and damn it's loud!!! I like it a lot! Keep up the good work
EDIT: I'm not using standard earphones anymore. Now they're slightly better with rubber that isolates your ears completely from outer sound and I actually could feel the pressure from the bass in my head. I don't think I'll be listening to it like that for much longer hahaha
[ This Message was edited by: volume100 on 2009-10-07 00:27 ] |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
What kind of wbxml did you use? 2. OpenAir is louder but I thought 1. ClosedAir sounds better... Since I only listen at 2-4 bar (max vol is 8 bar), I prefer using 1. ClosedAir for now
Not using standard headphones? If you want to unleash the full potential of this acoustic, buy High-End Grados or Audio-Technica... Plug it to amplifier, and listen at mp3 in 320kbps
Hiron
|
idumbakumar
Joined: Oct 01, 2007
Posts: > 500
From: chennai,india.
PM |
@Hiron
I tried via 3.5mm jack and i'm sure my jack and headset is perfect.MH-700 is a Handsfree via 3.5mm jack which comes with Xperia here i'm not talking about fast port.
I had right channel mute with MH-700 when I used my moded acoustics but there was no problem with normal 3.5mm headset.
There's difference in both MH-700 3.5mm jack and normal 3.5mm jack in MH-700 the ground point is splitted for mic and ground take a look at nokia 3.5mm Handsfree. So i'm sure some of the parameters have been changed to cause this issue. I hope u understand.
If anybody have nokia 3.5mm headsets like 5310 check this prob. |
Hiron
Joined: Aug 16, 2007
Posts: 435
From: Denpasar - Bali, Indonesia
PM |
I believe in you, sorry for the inconvenience
Try to upload phf_jack_play.wbxml from 2. OpenAir or from original W995... Give me the report, please...
Hiron
[ This Message was edited by: Hiron on 2009-10-07 06:11 ] |
|
|
Posted: 2009-09-25 15:52
