| Author |
w810 lights on in macro keeps flashing |
ramstad
Joined: Sep 18, 2004
Posts: 14
PM |
I had this problem too, but now it doesn't flash every time!
I managed to start the light several times without flashing, but suddenly it flashed again.
Does the software in the phone heal it selves, like Windows fixes small problems??? Weird, I think!
Do someone know when new SW appears on SEUS?
(Sorry for my bad english, it is some years since my english lessons!) |
|
|
himlims_nl
Joined: Apr 06, 2004
Posts: > 500
PM |
SE gave advise to do a master-reset 2 times on a row ... didn't work for me, but she told me it might help for some |
ramstad
Joined: Sep 18, 2004
Posts: 14
PM |
I tried a total reset, twice in a row! (In fact I resetted it 4 times in a row)
I have switched light on/off several times in Flashlight-mode and Camera-mode, and I have not seen the light been flashing anytime since then!
(I have tried to provocate the phone to begin to flash, but it seems to be all right now!)
Then it is only one bug left: The message-tone, witch is very low first, and get a bit higher until it is finished.
The total reset is worth a try folks!
B U T R E M E M B E R T O B A C K U P Y O U R S T O R E D S T U F F O N T H E P H O N E !!!
(I T D I S A P E A R S A F T E R T H E T O T A L R E S E T !!!) |
ramstad
Joined: Sep 18, 2004
Posts: 14
PM |
Oh f..ck !!
It's start to flash again! But after a while when I tried the light again it went to normal!
It seems to be a periodic bug instead of an always-bug now!
Better, but not good enough!
I think we have to wait for an update anyway!
I'm sorry that I didn't test it for a bit longer before I posted the letter above!
[ This Message was edited by: ramstad on 2006-05-12 22:01 ]
[ This Message was edited by: ramstad on 2006-05-12 22:02 ] |
robm4
Joined: Apr 18, 2006
Posts: 11
PM |
Yer , i have the problem too just going to have to wait till new firmware. |
trotskyite
Joined: Apr 23, 2006
Posts: 3
PM |
Took my flashing w810 back to vodaphone to get it replaced. The first two replacements had the same problem, the third one worked and still seems to be ok a few days later.
The people in the shop hadn't seen this problem before but were going to test some more of the stock and then hassle SE about it. |
doming
Joined: Apr 14, 2006
Posts: 36
From: Netherlands
PM |
another problemo:
it seems that when receiving SMSmessages or incoming calls, it won't vibrate sometimes, especially when in Silent mode, but i HAVE turned on vibrating at all times in the settings menu.. |
jepaz
Joined: Jul 29, 2002
Posts: 131
PM, WWW
|
No problem with my w810i, fw ver R4CA029.
_________________
Keep your friends close, your enemies closer.
[ This Message was edited by: jepaz on 2006-05-04 02:55 ] |
smartphn
Joined: May 02, 2006
Posts: 19
PM |
guys are these voda(messed up my)fone branded w810s which have these bugs you guys mention??? |
BUFFBOY
Joined: Jul 20, 2005
Posts: > 500
From: Sydney
PM |
also another problem is the msg tone 3 and 4 are distorted ...
need firmware update please
BMW M3 |
himlims_nl
Joined: Apr 06, 2004
Posts: > 500
PM |
When i like to set a ringtone or smstone it does not play once i hover over the option/sound
quite annoying; now i've to select a tone, ask someone to send me a sms to hear the sound |
bavlondon2
Joined: Jan 28, 2006
Posts: > 500
PM |
So has anyone actually solved this flashing led problem. I just got a nother w810 and it has the same problem. How do you check the firmware version ? |
awave
Joined: Feb 11, 2006
Posts: > 500
From: United Kingdom
PM |
-->(right), *(star), <--(left), <--(left), *(star), <--(left), *(star), service info, software info. (well its under that on v600i and should be on ALL other ///(except really old!) and se models  ) |
bavlondon2
Joined: Jan 28, 2006
Posts: > 500
PM |
Cheers. I get R4CE012....is that the most recent version ? I only got it today. Should i just update it over the air through the phone ? |
awave
Joined: Feb 11, 2006
Posts: > 500
From: United Kingdom
PM |
over the air - shit i wish my v600i had that...yeh i would try updating, no harms done if it doesn't update is there? - but i'd check around to see what firmware is the best for the w810i at the moment though before doing, but if you can just see whether there is an update without updating - yeh try it...but i'd check with other w810i users to see which one is the best in there opinions first, or if you can't find any bugs in your current firmware then DO NOT upgrade!
hope this helps |
|
|
Posted: 2006-05-03 15:00
