dnicmk
Joined: Jul 15, 2005
Posts: 4
PM |
Hi,
I have a Pama Pro hardwire carkit (HF02) fitted into my car and it is connected to a SE T630. I have recently upgraded to the SE K750i and you guessed it the connector (to the bottom of the phone) has changed. I called Pama who are still selling the kit to ask for a new lead to fit the K750i, only to be told that they do not have one and it would be unlikely that they will produce one.
I have the old type T630 connector lead and was wondering if I could purchase another USB data lead for the K750i and cut off the cable and patch it to the T630 lead to make the connection. If this is possible can someone give me the pin out connections for the K750i so I can make a cable that will work. Currently the pins on the lead cable that plugs into T630 are as follows.
Looking at the plug from left to right with the UP logo on the plastic housing facing me:
Left-Large plastic pin- brass pins at the 1 and 2 - 3,4,5,6, are blank slots and not connected- brass pins at 6 and 7 - small plastic pin is next- 1 blank slot 8- then another small plastic pin- finally two brass pins at 9 and 10- with another large plastic pin.
Any help would be appreciated
Cheers
David
|
Posted: 2005-08-01 22:24
