| Author |
Install original SE firmware K750I |
Yannmrt
Joined: Jun 13, 2005
Posts: 18
PM |
Some know how to but original firmware from SE wihtout any customization from any provider ???
Even after update with new firmware the customization E-plus stay.
Thanks
[ This Message was edited by: Yannmrt on 2005-06-14 19:20 ] |
|
|
Cytech
Joined: Feb 19, 2002
Posts: > 500
From: Stockholm, Sweden
PM |
The  update service checks the phone's CDA and IMEI number and then update with the right firmware pack... meaning you have to change both IMEI and CDA number in order to be able to unbrand the firmware through the update service... so if you want to unbrand it you'll either have to take the phone to some store that performs theese things or get some third party software in order to update the phone yourself |
synagence
Joined: Aug 18, 2004
Posts: 114
PM |
Its just the CDMA number which needs changing NOT the IMEI number....which is technically illegal i think
When i wanted to upgrade my S700 with R3m my CDMA number wouldn't allow it on SEUS...so i changed it with setool to a generic version and upgraded fine
the IMEI number is just a serial number... |
Yannmrt
Joined: Jun 13, 2005
Posts: 18
PM |
Quote:
|
On 2005-06-15 09:02:03, synagence wrote:
so i changed it with setool to a generic version and upgraded fine
the IMEI number is just a serial number...
|
|
Do you buy all the setool set, i see some thing like 270 $, or do you find other way ??
[ This Message was edited by: Yannmrt on 2005-06-15 09:23 ] |
synagence
Joined: Aug 18, 2004
Posts: 114
PM |
I had a couple of setool credits left over from previous firmware updates so i got some help and was able to get it changed....
Not sure whether you can still do it this way unless you already have credits... |
DCUK7
Joined: Aug 01, 2004
Posts: > 500
From: Liverpool, UK
PM |
You cannot get individual SETOOL credits any more. Ask gbrooks3 about this, he is/was an authorised reseller of the credits. |
Yannmrt
Joined: Jun 13, 2005
Posts: 18
PM |
Any way i check again and to be able to do the "transformation" i need to make other cable and I don't have any thing to do it ;o(((
Thanks every body.
If some one know a shop or somebody where they can take care for everything in Madrid please e-mail me the address.
Thanks
[ This Message was edited by: Yannmrt on 2005-06-15 16:22 ] |
gbrooks3
Joined: Jun 02, 2003
Posts: > 500
From: OTP RED CID36
PM, WWW
|
Just to clear things up a little,
As far as i know, the SEUS checks CDA and TAC part of IMEI to determine its current state and what model it is.
To decustomize new phones, you need a new cable  Pinouts are already available - BUT MOST IMPORTANTLY
DO NOT USE POWER FROM USB, YOU WILL FRAZZLE YOUR PHONE, you should not exceed 3v DC input - best thing to use is a regulated power supply. Of mod the PCB with a resitor and zenner diode.
Because the platform sends bogus messages while charging, that is why!!!..But why this change of heart?..We sense a charger connected, oops, we will not shut down after all!!!..*********************** UI BASIC, HOLD YOUR HORSES
|
Yannmrt
Joined: Jun 13, 2005
Posts: 18
PM |
Start to be Chiness for me.
If you have link where i can see the cabling ..... may be it will be more easy.
and after I need to get the software and the firmware to be transfer. |
|
|
Posted: 2005-06-14 20:17
