| Author |
can i upgrade firmware and debrand with eri t610 cable? |
luckykid
Joined: Apr 27, 2005
Posts: 40
PM |
well can i upgrade the firmware and de-brand with this usb data cable? and where can i get both software from? i have heard davinci mentioned is this the one? can i get the firmware from SE site?
sorry its a k700i cheers
cheers all
[ This Message was edited by: luckykid on 2005-06-07 15:21 ] |
|
|
luckykid
Joined: Apr 27, 2005
Posts: 40
PM |
oh and its unlocked now but was on t mobile so has this horrible pink tzones menu button. yuk |
Sebby
Joined: Dec 12, 2004
Posts: > 500
From: London, UK
PM |
I don't believe you can flash a T610 with DaVinci, only unlock. If you get yourself a terminator dongle (eBay), you can flash as many times as you please at no cost. A guide can be found here.
[addsig] |
gbrooks3
Joined: Jun 02, 2003
Posts: > 500
From: OTP RED CID36
PM, WWW
|
I posted on here a while ago software that could flash unlock old SEMC phones with Fighter cable/DSS-25 or T28 cable.
Its here somewhere - i suggest you search 
Because the platform sends bogus messages while charging, that is why!!!..But why this change of heart?..We sense a charger connected, oops, we will not shut down after all!!!..*********************** UI BASIC, HOLD YOUR HORSES
|
ESTOR
Joined: Apr 20, 2002
Posts: > 500
From: Singapore
PM |
That tool didn't work for me. I have the T28 cable (tested with one of those logger programs, and have used it to unlock using remote unlock way back). Tried on T300, T610. 2 different PCs. Tried all COM port speeds. "Cannot power up phone". Terminator worked though.
[ This Message was edited by: ESTOR on 2005-06-09 21:51 ] |
jenbones
Joined: Feb 19, 2005
Posts: > 500
From: london
PM |
U need the t28 cable!!
 1500+ Posts |
gbrooks3
Joined: Jun 02, 2003
Posts: > 500
From: OTP RED CID36
PM, WWW
|
i cant help it if you cant get the software to work.
I guess you need to practise manual ignition a bit more.
Soft works fine me.......
Because the platform sends bogus messages while charging, that is why!!!..But why this change of heart?..We sense a charger connected, oops, we will not shut down after all!!!..*********************** UI BASIC, HOLD YOUR HORSES
|
ESTOR
Joined: Apr 20, 2002
Posts: > 500
From: Singapore
PM |
I have the T28 cable. I wasn't asking for support as I know there is none. Just to try it out to see if it works as I already have working terminator.
Also to let others know that it might not work for them, before they go out and buy a cable.
Manual ignition... oh I get it. well, maybe I'll try it later when I have time
[ This Message was edited by: ESTOR on 2005-06-10 19:32 ] |
gbrooks3
Joined: Jun 02, 2003
Posts: > 500
From: OTP RED CID36
PM, WWW
|
The program works. Enough said. Just keep tapping the power button. Or use usb
Because the platform sends bogus messages while charging, that is why!!!..But why this change of heart?..We sense a charger connected, oops, we will not shut down after all!!!..*********************** UI BASIC, HOLD YOUR HORSES
|
ESTOR
Joined: Apr 20, 2002
Posts: > 500
From: Singapore
PM |
Indeed it works. You have to tap the power button immediately after it says " connect to phone ", which the program responds with " bypass boot authority " , then you have to keep tapping the power button at the rate of about twice per second or slower, as the progress bar on the bottom advances. Keep doing it (the progress bar will go back to 0% halfway, just like terminator dongle) until the program goes on its own. I guess I didn't read your original post.
http://www.se-nse.com/forum/showthread.php?t=457 |
|
|
Posted: 2005-06-07 16:14
1500+ Posts 
