| Author |
K700i Data cable problem |
qprjack
Joined: Jan 24, 2004
Posts: 34
PM |
I got a data cable from ebay yesterday, but i don't know how to work it as it didn't come with any instructions. I have installed it all, and connected it to my phone. It is definatly connected as it is charging through the computer. I don't know how to send stuff to it, as when i click a file that came on the CD, it doesn't show my phone.
All help Appreciated
Jack |
|
|
k4m!k4ze
Joined: Oct 02, 2004
Posts: > 500
From: CBE
PM |
Have u installed the drivers for the USB cable ? u must have got it along with the data cable.
Once u've done that try using k700DateiManager to connect -
http://k700.hitziger.net
If at first you don't succeed, destroy all evidence of your attempt !! |
qprjack
Joined: Jan 24, 2004
Posts: 34
PM |
I think i've installed it all, but i'll try again.
Cheers |
qprjack
Joined: Jan 24, 2004
Posts: 34
PM |
Yes i have installed it. I clicked on Myphones on my desktop, and in the CD manual thing on the CD, it says the phone should be in there, but it says not connected, even though it is. I'm using PC Suite, as that is what came on the phone
Cheers
Jack |
k4m!k4ze
Joined: Oct 02, 2004
Posts: > 500
From: CBE
PM |
Phone suite is quite unreliable. Download that k700DateiManager and try to connect.
EDIT : Just a minute ! You installed the phone suite but did u install the USB cable drivers ? Did u get a CD along with the USB cable ? the drivers on the CD which came with the phone are only for SE's data cable - DCU-11 i think
_________________
Its the setbacks you encounter that make victory sweeter
[ This Message was edited by: k4m!k4ze on 2005-02-13 14:40 ] |
CrackerJack
Joined: Apr 28, 2003
Posts: > 500
From: NE of Borneo to the NE of US
PM |
Go to https://sourceforge.net/ and download the latest version of fMA.
It doesn't need anything else. No COM ports to enable, just connect your phone to the cable and launch the app. fMA will look for your phone.
INTEGRITY
Without it...
Everything else is irrelevant. |
fu1at
Joined: Nov 01, 2003
Posts: 325
From: Selangor, Malaysia
PM |
did u install the DCU-11 drievr? u can get it download from  official web site.
 J200, W550i, K750i, M600i, HBH-30, HBH-660, HBH-608, HBH-PV700, HBH-610, MXE-60, CLA-60, MMC-60, CDS-60, |
qprjack
Joined: Jan 24, 2004
Posts: 34
PM |
k4m!k4ze, I'm installing the SE CD that I got with the phone now. Cheers for that. |
k4m!k4ze
Joined: Oct 02, 2004
Posts: > 500
From: CBE
PM |
u dont need to install the SE CD, only the drivers for the USB cable. Which USB cable did u buy btw ?
If at first you don't succeed, destroy all evidence of your attempt !! |
qprjack
Joined: Jan 24, 2004
Posts: 34
PM |
This is the Item that i bought. I don't exactly know what it is called, but i have emailed the seller for his help.
http://cgi.ebay.co.uk/ws/eBay[....]275710&ssPageName=STRK:MEWN:IT |
k4m!k4ze
Joined: Oct 02, 2004
Posts: > 500
From: CBE
PM |
Its not SE's DCU-11 cable. Did u get the CD along with the cable ? there must be an installable(*.exe) file in the root directory(usually). Usually that installs the drivers automatically.
If at first you don't succeed, destroy all evidence of your attempt !! |
qprjack
Joined: Jan 24, 2004
Posts: 34
PM |
I did get a CD with it, and i installed it, but i'll try and install it again.
Cheers
Jack
Edit - I got a reply from the person, nd this is what he said, so if i can understand them, i am going to follow the instructions. I'll update you all later.
Cheers
Jack
What I suggest is that you uninstall the USB Driver from your PC. Then plug in the USB Cable, when prompted by windows, with the software CD in your CD Rom Drive, run the add new hardware wizard, select automatically detect driver.
You may have to run this wizard a couple of times, until windows prompts that the hardware is installed and working properly.
Next, find which port your USB Data Cable is being found on by your PC, you need to go to your device manager.
To do this go to -- control panel (switch to classic view) -- System -- Hardware -- Device Manager -- Ports (COM & LPT).
The cables connection will be displayed by windows as a name followed by the wording COM, then a number for example PROFLIC 4 - COM 2. The COM information is what you need, however this may differ depending on the kit you purchased.
Please make sure that you have the cable plugged in to the USB Port on your PC, otherwise Windows will not pick up the connection and display connection information. Once you have this information, set up the software to pick up the cable on the displayed com port.
[ This Message was edited by: qprjack on 2005-02-13 16:26 ] |
k4m!k4ze
Joined: Oct 02, 2004
Posts: > 500
From: CBE
PM |
if you have installed it, check the whether the USB port shows up in Hardware device manager in your system under COM ports.
Also try using DateiManager instead of SE PC suite, like i suggested
If at first you don't succeed, destroy all evidence of your attempt !! |
CrackerJack
Joined: Apr 28, 2003
Posts: > 500
From: NE of Borneo to the NE of US
PM |
If you can uninstall the prior driver installation, I suggest that you that first.
INTEGRITY
Without it...
Everything else is irrelevant. |
|
|
Posted: 2005-02-13 15:12
