mariano1985 Joined: Jan 29, 2005 Posts: 1 PM |
Sorry for my english, but i'm italian...
I have buy a cable for unlock my z1010, but I've received a USB T68 data cable!
I try to modify it, but i have a problem: i put the pin 5 cable in 7 and the 4 in 6. I have also create a bridge from pin 9 to pin 11, but on this pins i haven't a cable!
In pin 2 and 3 i have 2 cables... i cut they because i don't find it in guides...
how i can do fot work the service cable!?!?!
Please help me!
there is my orignal cable configuration:
Pin 1: X
Pin 2: RED CABLE
Pin 3: YELLOW CABLE
Pin 4: WHITE CABLE
Pin 5: BLUE CABLE
Pin 6: X
Pin 7: X
Pin 8: X
Pin 9: X
Pin 10: BLACK CABLE
Pin 11: X
How i try to do?!?!
[ This Message was edited by: mariano1985 on 2005-01-29 16:54 ] |
gbrooks3 Joined: Jun 02, 2003 Posts: > 500 From: OTP RED CID36 PM, WWW
|
Have a look here
These may help you.
Because the platform sends bogus messages while charging, that is why!!!..But why this change of heart?..We sense a charger connected, oops, we will not shut down after all!!!..*********************** UI BASIC, HOLD YOUR HORSES
|