| Author |
Help with Data transfer with DCU-11 |
COokee_puss
Joined: Mar 05, 2004
Posts: 8
PM |
im having troubles with getting my phone to detect my data cable, i have a SE T230 and a T610 and neither one detects it. I have installed the drivers correctly but when i go into "connectivity" on the phone the "Accessories" is still greyed out. When i goto the picture software i got with the T610 it doesnt detect the phone and in the phone monitor nothing comes up there, i was wondering if anyone could give me some advice on how to get this thing working, its kinda been stressful and id like to hope i didnt waste $60 on a cable that doesnt work. Id also like to know how to transfer things once the cable detects that there is a phone plugged in.
thanks |
|
|
CrackerJack
Joined: Apr 28, 2003
Posts: > 500
From: NE of Borneo to the NE of US
PM |
Try downloading fMA from https://sourceforge.net/
It doesn't need MPM to detect your phone and you can upload/download files with it.
INTEGRITY
Without it...
Everything else is irrelevant. |
ESTOR
Joined: Apr 20, 2002
Posts: > 500
From: Singapore
PM |
uploading from phone to PC with a cable works for the T610 only.
With Mobile Phone Monitor, yo need to enable the COM port that corresponds to the cable.
[ This Message was edited by: ESTOR on 2004-03-05 15:31 ] |
qoti
Joined: Feb 18, 2004
Posts: 48
PM |
@estor
I assume your refering to the mms software which only sends mms templates and is useless for anything else.
The fma allows you to send and recieve stuff from any t-series phone.
Besides the OP says they also have a 610 and that dosnt work either.
I have a post about a similar tbl it explains getting the cable to work.
http://www.esato.com/board/viewtopic.php?topic=52573 |
COokee_puss
Joined: Mar 05, 2004
Posts: 8
PM |
im still abit confused with the fma program, how do i transfer the files from pc to the phone? is it only surposed to work on the T610? is it surposed to work with the T230 ? because when i try to connect i get unable to connect when i plug in the T230
[ This Message was edited by: COokee_puss on 2004-03-05 20:11 ] |
qoti
Joined: Feb 18, 2004
Posts: 48
PM |
Unfortunately Ive only had the opportunity to try it on my t616 and t68 and it works on both.
I was at a site that I linked to from another thread here but now I cant find and didnt bookmark but I thought I saw a blurb about it working on all t series phones.
If you follow the link I posted I give info on setting up the cable and the comports. If you get it working on t610 the other phone should work too. The fma is free and worth a shot. So work on the t610 first
I should probably add that the only indication the phone sees the data cable is that it shows its charging. Its the program that shows the phone connected. But first you need to make sure the cable is detected by the comp first
[ This Message was edited by: qoti on 2004-03-05 20:52 ] |
ESTOR
Joined: Apr 20, 2002
Posts: > 500
From: Singapore
PM |
---------------------------
"The fma allows you to send and recieve stuff from any t-series phone"
---------------------------
That is simply not true with a CABLE. You cannot send a picture from most T series phones to the PC with a cable. You can use PhoneBackup or phone book picture caller ID workaround to send these things to the PC indirectly. I am 100% sure FMA does not receive pictures from T200 and T300 series.
---------------------------------------
I should probably add that the only indication the phone sees the data cable is that it shows its charging.
---------------------------------------
That may be true for your specific non-OEM cable. All OEM SE data cables (USB and Serial) will NOT charge the phone in any way, shape or form. You can however verify the functionality of the cable by the HyperTerminal test using AT commands.
------------------------
is it only surposed to work on the T610? is it surposed to work with the T230 ? because when i try to connect i get unable to connect when i plug in the T230
------------------------
FMA works with all SE phones, to various degrees (limited by the PHONE's capability). For the T230, you may need to change the speed of the COM port that corresponds to your cable to 9600. You can do that under Device Manager.
[ This Message was edited by: ESTOR on 2004-03-08 18:03 ] |
qoti
Joined: Feb 18, 2004
Posts: 48
PM |
nm
[ This Message was edited by: qoti on 2004-03-13 04:50 ] |
afifa
Joined: Apr 03, 2004
Posts: 6
PM |
hi there im having the same trouble. can some one please help me out. my phone is not detecting the cable either. my mobem is using com1 so 2 is idle. i have a t 230. i connected my cable to com2. but when i go to the phone the accessaries is greyed. besides this my phone is not getting detected by the software either. one software i downloaded from http://www.mobiledit.com. can any one please help me out PLEASE |
ESTOR
Joined: Apr 20, 2002
Posts: > 500
From: Singapore
PM |
You phone will not show anything under "accessories" even when a cable is conencted to it.
Make sure that your COM2 on your PC is enabled and working. Make sure that COM2 appears under Device Manager. It is often disabled through the BIOS.
Is your cable a proper data cable, and not an unlocking cable? Other than that, anything that can be done is already mentioned in this thread.
|
Bobsie
Joined: Apr 13, 2004
Posts: 2
From: London
PM |
i'm haveing similar problems with my Z600. i have sent back and received 3 new cables thinking they were faulty but it just isn't registering that there is a phone connected. i have enabled the com port in mobile monitor but it just won't work. another thing that's weird is the fact that this one i have now is listed in the device settings when the cable isn't connected to the phone, but when i connect the phone, it removes itself from the list. please anyone help, i'm getting so stressed with this, and i've spent a lot of money trying to get it to work.
cheers in advance.
[ This Message was edited by: Bobsie on 2004-04-13 19:11 ] |
ESTOR
Joined: Apr 20, 2002
Posts: > 500
From: Singapore
PM |
Float's Mobile Agent does not require mobile phone monitor. Have you tried that? What about setting COM port speed to 9600?
You can go into Control Panel -> Phone and Modem Options and let windows detect the phone, and pay attention when it's detecting, to see if it tries to look for the COM port where you attached the cable+phone. |
bico
Joined: May 19, 2003
Posts: > 500
From: Stockholm, Sweden.
PM, WWW
|
It works just fine for me. That's not really going to help you out, but it might encourage you to keep on trying.
I am using a Dell Dimension 4600i with Windows XP Home Edition 5.1.2600 SP 1.0, floAt's Mobile Agent (fMA) 0.1.0.35 RC5, SE DCU-11 and SE T610.
I can't remember doing any configuration or preparation whatsoever prior to connecting the cable to the computer and the phone to the cable. As I remember it, it was "plug & play".
Ok, to be honest it was some time since I did the connection, so I might just have forgot what I did to make it work...
Good luck anyway!
|
Bobsie
Joined: Apr 13, 2004
Posts: 2
From: London
PM |
na mate, still don't work. i'm ready to throw my computer out the bloody window. i've had enough. oh and i downloaded fma but it won't run when i click on it. help me please. |
|
|
Posted: 2004-03-05 12:28
