| Author |
t226 Polyphonic sound problem |
Chickenwing168
Joined: Jan 24, 2004
Posts: 19
PM |
I finally bought the data cable for my T226 phone. I can transfer wallpaper, theme, sound..etc. However, my program does not support *.*.midi file...can anyone tell me a program that support midi file for T226?? |
|
|
qoti
Joined: Feb 18, 2004
Posts: 48
PM |
The sony mms home studio supports midis but its limited to a certain type. In other words you cant rip a cd and send it to the phone I tried it. there are midi sites you can get anything from by searching. I prefer Floats mobile agent aka. FMA to send midis but the sony software you can edit them so they arent so long.
[ This Message was edited by: qoti on 2004-03-04 03:41 ] |
Chickenwing168
Joined: Jan 24, 2004
Posts: 19
PM |
I can't seems to find the sony mms home studio, so I went and dled the one you recommended ^^! However, I cant seems to connact my phone to the data cable even though the port is active...any tips there? |
Chickenwing168
Joined: Jan 24, 2004
Posts: 19
PM |
ok, I got the Sony Home Studio working...I can send Polyphonic Ringtone to my Phone..however, they are saved under : Template?!...I can't seems to open it even though they are in my Phone...-.-...plzzzz help |
qoti
Joined: Feb 18, 2004
Posts: 48
PM |
Ok I dont use mms but it put it in messages/mms/templates. That explains a lot I had that happen a few times and never did figure where it went LoL.
Ive figured out how to find things that dissapear after loading goto pictures/more/memory status look for jumps or stuff that wasnt there before. You cant see it there only delete but you can find it that way.
I prefer FMA its easier to use and dosnt do strange things though im sure sonys mms did what it was supposed to just not what you have in mind.
Anyway Im still trying to figure out how to move it out of mms I just thought Id let you try too.
Hope this helps... Marcie |
Chickenwing168
Joined: Jan 24, 2004
Posts: 19
PM |
hehe...I can finally listen to the polyphonic ringtone in my phone...But since is a template, I can only send it to other people...I can't seems to add it in "my sound" list... lets try to solve this together ^_^ |
qoti
Joined: Feb 18, 2004
Posts: 48
PM |
This is a link to fma site youll need Fma 0.1.0.31b and Im assuming all the 3 files listed under it. I got mine with my cable.
http://fma.xinium.com/index2.htm
This is much better if you want to edit midis I found this program today though you should still be able to edit in mms and save then go and get it with fma. http://perso.magic.fr/llebot/welcome.htm
You can find midis here http://www.musicrobot.com/
I found that if you go between mmms and fma they wont share the phone even if you close them so you may have to restart to get it to see your phone.
I dont see anyway to get it from template or unsent to somewhere else which imuho is kind of stupid. But then Im mms iliterate. 
|
Chickenwing168
Joined: Jan 24, 2004
Posts: 19
PM |
up until this point, I still can't figure out how to connect with Fma...I restart my pc, I closed my cellphone, I unplug/replug the data cable...>_<..etc~ It just keep poping: Connection failed
Does the program really support T226?...I put the data cable on Com port 3 and I enable it. SE my picture and Sony Mms home studio work perfectly -.- |
qoti
Joined: Feb 18, 2004
Posts: 48
PM |
Ok....you know what com port its on double check in device manager to make sure its port 3 and no conflicts. Ive noticed on my laptop I can assign one usb independent of the other so I have to make sure to use the same usb port. Also check in device manager to make sure it shows as a prolific usb to serial device
Now open fma window and click tools/options/connection/ tick serial port and make sure its set to port 3 baud 115200 and rts enable and the other disabled. Mine is set to port 2 for some reason, I did it, but dont know why so if 3 dosnt work make them all 2.
[ This Message was edited by: qoti on 2004-03-04 22:24 ] |
Chickenwing168
Joined: Jan 24, 2004
Posts: 19
PM |
ahhhh...still not working >_<, ok, heres what I did:
1) I make sure the phone is on and the data cable is connected to both phone and PC
2) I go on Control Panel, System, Device Manager to check the USB port (which indicate COM3)
3) I go on Control Panel, Phone Monitor to make sure the COM3 is enable
4) I open FMA
5) I make sure is Baud...is 115200, com3 and RTS enable, DTR disable
6) I connect
7) after 15 sec or so, it says: connection failed phone disconnect or out of range
did I do anything wrong?? -.-
[ This Message was edited by: Chickenwing168 on 2004-03-04 23:38 ] |
qoti
Joined: Feb 18, 2004
Posts: 48
PM |
First have nothing connected follow the instructions below you will connect the cable and the phone last.
*In the phone monitor options make sure all ports are enabled and not reserved this wont affect anything else and that your phone is listed.
* In phone and modem in control panel make sure your regular modem dosnt use com 3 mine does and thats why I had to use com2 (I forgot). Also if you installed sony dial up networking the cel will show there too as another modem(dont worry about that now). plug in cable and look
* In device manager make sure it actually says prolific usb serial cable and theres no yellow tag or you need to reinstall the drivers again and that it matches the other com-port settings. Now make sure that you use the same usb port to plug it in to. then turn on and plug in the phone last. then open fma and try to connect. If it dosnt work on com 3 try 2 or 4.
Then go to fma window see if you are showing version 31c if not go to help and chech for udates.
Then go into options/communications/ disable IRMCsync and obex
Then go to options/connect/ and set to 9800 baud
Also go back into mobile phone monitor and disable all ports except one you are using. I dont have this problem but someone else did.
Restart everything and try to connect you may not get all info from phone but you should be able to send to phone now.
[ This Message was edited by: qoti on 2004-03-05 00:23 ]
[ This Message was edited by: qoti on 2004-03-05 01:47 ]
[ This Message was edited by: qoti on 2004-03-11 22:23 ] |
Chickenwing168
Joined: Jan 24, 2004
Posts: 19
PM |
sigh...I've been trying your suggestion a entire day yesterday....Still don't work...I don't think FMA is compatible with my T226 >_< |
qoti
Joined: Feb 18, 2004
Posts: 48
PM |
Fma is compatible with t226 and t230. You just dont have some features when it comes to getting stuff from phone to comp.
I did a little research and not knowing where you get hung up at heres some other things to apply.
First go to fma window see if you are showing version 31c if not go to help and chech for udates.
Then go into options/communications/ disable IRMCsync and obex
Then go to options/connect/ and set to 9800 baud
Also go back into mobile phone monitor and disable all ports except one you are using. I dont have this problem but someone else did.
Restart everything and try to connect you may not get all info from phone but you should be able to send to phone now.
If still having tbl tell me what error and when.
[ This Message was edited by: qoti on 2004-03-06 22:25 ]
[ This Message was edited by: qoti on 2004-03-06 22:27 ]
[ This Message was edited by: qoti on 2004-03-09 16:36 ] |
Chickenwing168
Joined: Jan 24, 2004
Posts: 19
PM |
YES YES!!!! IT WORK!! THX U SOOOO MUCH~ thx for helping me for all theses days  ..really appreciated...!!! |
qoti
Joined: Feb 18, 2004
Posts: 48
PM |
Yaaay.... |
|
|
Posted: 2004-03-04 01:25
