| Author |
t681 and jabra bt200: recording voice commands |
bhang
Joined: Jan 03, 2003
Posts: 97
PM |
I have a t68i and a jabra freespeak and I have found it very tricky to record the voice commands thru the headset... This is important because the commands I made with the phone mic don't work when used via BT, I have managed to save some but I have to do some fancy finger work to get it to work and I can never seem to repeat the same results twice.
The commands I have managed to save with the headset work great but it takes me like 20-30mins and millions of attempts to get the headset to connect at just the right time so the phone will feed the record prompt and open the BT mic to record the tag...
I have gotten it to work a few times like this:
1 select tag to be changed
2 replace tag
3 press the button on the BT set
4 if im lucky the beep will go to the BT set and I can record the tag
most of the time it will get to step 3 and then the headset will connect and then disconnect and the phone responds "sorry nothing heard" or the phone and the BT will lock up looping about 5 seconds of audio over and over thru the internal speaker and my BT...
Anybody got any suggestions?
there must be a way to pipe all audio to the bt all the time, if I connect the set manualy(via the bluetooth menu) and then try to record a voice command it acts as though it was never connected.
t681:
r5d007
prgcxc125544
bt200:
do they have different version firmware?
bhang
ps: I live in the states so upgrading is a pain in the ass, but it is possible...
| |
|
bhang
Joined: Jan 03, 2003
Posts: 97
PM |
I have gotten around this bug by recording tags with the phone mic that are very different from each other and longer than my old ones 10-15 secs, I have found that speaking the last 4 digits of the p# works well or the # and street name of the house which the phone you want to call resides in.
I would still like to record with the BT200 mike but this works ok, and with no replies in 24 hours I doubt i'll be finding any help anytime soon... I have this on email notify so if your reading this sometime down the road go ahead and reply.
bhang
t300,t68i
|
augustborn9917
Joined: Jun 03, 2003
Posts: > 500
From: Uranus
PM |
i recorded my voice commands thru the phone mic, and ive had NO "no match" on my JABRA BT200. before i bought the BT, i recorded the voicecommands/dial in a completely silent environment and in a normal (not emhasized) tone of voice (almost hushed). i did however, replace my JABRA because of poor range/static/crackle (3ft!) that seems to have plagued the earlier versions of BT200
ps.
when all else fails, delete
the pairing and then re-pair
_________________
just a misplaced letter separates me from being "witty" to being "twitty"
[ This Message was edited by: augustborn9917 on 2003-08-12 23:57 ] | |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2003-08-11 21:27
