| Author |
Problems with PC - T68i connection. |
Pompier
Joined: Jul 11, 2003
Posts: 6
PM |
Hello
I have T68i sold with a cable data but I don't arrive has transferer above images. did i read that there were 2 different cable data what is te difference between us? which is handling has to make for transferer images and topics on my t68 knowing that the site of chrisstenson is HS?
Sorry for my poor english i m french and noob  |
|
|
__spc__
Joined: Apr 04, 2003
Posts: > 500
From: To: Cc: Bcc: Subject: Message:
PM |
Bonjour!
You need to install Mobile Phone Monitor on your PC.
Also, you need some transfer sofdtware like SendFile (see christersson.org)
Steven. 
This message was NOT posted from my P800 that I no longer have |
Pompier
Joined: Jul 11, 2003
Posts: 6
PM |
Mobile phone monitor have ever been installed and it as detected my phone and sim card and update my time and date but when i use Sony Ericsson MyPictures or Sony Ericsson Image Editor, soft don't detect my phone. |
GOwin
Joined: Jan 17, 2002
Posts: > 500
From: .uʍop ǝpısdn s&
PM, WWW
|
@pompier
welcome to esato  !
there are 3 kinds of cables: a) serial data cable; b) serial service cable; c) usb data cable
what you need are the data cables. but if you got infrared, then the cables are optional because you can send the objects via Ir instead without any need for additional software.
if you're having problems with MPM, which SE software and others like sendfile depends upon. try fMA (eflame.com/fma) instead. (we also have a fMA discussion thread here.
----
i've been told that the Babel Fish Translator does a nifty translation sometimes. here's the result in French for my post above:
bienvenue à l'esato !
il y a 3 genres de câbles : a) câble périodique de données ; b) câble périodique de service ; c) câble de données d'usb de ce que vous avez besoin êtes les câbles de données mais si vous obteniez l'infrarouge, alors les câbles sont facultatifs parce que vous pouvez envoyer les objets par l'intermédiaire d'IR à la place sans n'importe quel besoin de logiciel additionnel.
si vous avez des problèmes avec MPM, que le logiciel et d'autres de Se comme sendfile dépend du fMA d'essai (eflame.com/fma) à la place. (nous avons également a [ discussion thread[/url d'url=http://www.esato.com/board/viewtopic.php?topic=3699&forum=17]fMA ] ici.
how was it? 
EDIT
if your phone is not detected, chech the your com port settings if they've been properly configued.
start>settings>phone monitor options. go to com ports tab, enable/disable the appropriate ports.
_________________
PinoyChitChat.com v0.99.0 na! - Let's talk!
Club 6-9 - ICT Consumer Rights Advocacy Discussion Group
[ This Message was edited by: GOwin on 2003-07-11 13:25 ] |
Pompier
Joined: Jul 11, 2003
Posts: 6
PM |
Thanks GOwin for your translate. i read english but i write it bad
How can i make difference between serial data cable and serial service cable.
I have ever try fma but its the same problem: don t find my phone... 
just for info my sofware is R2F004 in soft info in service menu.
[ This Message was edited by: Pompier on 2003-07-11 13:30 ] |
GOwin
Joined: Jan 17, 2002
Posts: > 500
From: .uʍop ǝpısdn s&
PM, WWW
|
hmm ... well, they work differently. the service cable is used for flashing the phone while the data cable is for making your phone communicate with the PC.
look at this page on how to modify a service cable to a data cable
did you get your cable from  ? if so, that should be a data cable unless it's not working right (or your serial/usb port) is not working right.
R2F is kinda old, I suggest you bring your phone to the nearest service point for a firmware upgrade.
|
Pompier
Joined: Jul 11, 2003
Posts: 6
PM |
my cable was sall with my phone in provider pack so its certainly a data cable but i have try it in 2 different pc and 2 cables (cause i have buy 2 t68i).
|
T.Bear
Joined: Jul 05, 2003
Posts: 23
PM |
I'm using bluetooth, sometimes IR but once I did install connection
between T68i and PC via data cable. I don't remember exactly but I think that it works for me after starting some SE program like "Phone Settings". If connection is OK, program will ask you for name of the phone and name for your SIM card. Names can be anything. After that
everything was OK. I didn't help you much but I think you are not far away from solution. |
waterlord41
Joined: Jun 29, 2003
Posts: 1
PM |
Hi guys... I have recently purchased a T68i pack from SFR (France-nope, I am not french) which comes with both handsfree set and serial data cable... Although it was very easy to install all the software to my computer (btw, I am using XP operating system) I went through hell for my computer to recognize my T68i. However, after searching esato forum and all other sites available on the internet I finally succeeded.
The only trick is to go to the control panel of your operating system and click on "reserve COM1 or COM2 (depending on to which COM port you already connected your mobile)" then restart your computer and voila! Following this simple procedure you can start using all the software that comes with the package.
It is weird that this information is not given ANYWHERE !!!! It seems like people wants to keep it as a secret!!
I hope this solves your problem.
|
Pompier
Joined: Jul 11, 2003
Posts: 6
PM |
Quote:
|
On 2003-07-11 15:28:35, waterlord41 wrote:
Hi guys... I have recently purchased a T68i pack from SFR (France-nope, I am not french) which comes with both handsfree set and serial data cable... Although it was very easy to install all the software to my computer (btw, I am using XP operating system) I went through hell for my computer to recognize my T68i. However, after searching esato forum and all other sites available on the internet I finally succeeded.
The only trick is to go to the control panel of your operating system and click on "reserve COM1 or COM2 (depending on to which COM port you already connected your mobile)" then restart your computer and voila! Following this simple procedure you can start using all the software that comes with the package.
It is weird that this information is not given ANYWHERE !!!! It seems like people wants to keep it as a secret!!
I hope this solves your problem.
|
|
this is exactly same pack i have purchase but for me i have reserve com1. phone monitor have recognize my t68i but no software detect it... |
__spc__
Joined: Apr 04, 2003
Posts: > 500
From: To: Cc: Bcc: Subject: Message:
PM |
@waterlord41
I use MPM, SendFile, Backup etc.
Sendfile *sometimes* doesn't seem to find the phone. Backup *always* finds the phone, and then afterwards, SendFile will too, no problem.
I think it always works if I boot the PC (Win XP), run SendFile, and *then* connect my T68i.
Also, I've just checked my COntrol Panel, and COM1/COM2 are enabled, but *not* reserved - I'll do that now, just for fun!
Steven.
This message was NOT posted from my P800 that I no longer have |
GOwin
Joined: Jan 17, 2002
Posts: > 500
From: .uʍop ǝpısdn s&
PM, WWW
|
Quote:
|
On 2003-07-11 15:28:35, waterlord41 wrote:
It is weird that this information is not given ANYWHERE !!!! It seems like people wants to keep it as a secret!!
|
|
It is not a secret (or anything like that) because not everyone uses the same settings. I don't reserved a my 1st com port for the t68, so I don't use that config at all.
|
|
|
Posted: 2003-07-11 14:05
