| Author |
Mitsumi USB - Need Acbtusb.exe |
onionz
Joined: Feb 21, 2003
Posts: 24
From: London, UK
PM |
I need this file to install Widcomm 1.3.2.7 drivers with a Mitsumi WIF-0402C dongle. There seems to be some form of hardware check ni most versions of the software which prevents it working properly with the "wrong" hardware. This produces a "No local device detected error". Even the Mitsumi 1.3.2.7, which is not intended for this older dongle, will not work (and this is after hacking the .inf, before soemone suggests that).
Hacking the .inf will get the driver installed, so all looks rosy in Device Manager, but the software won;t work properly. However, c0mm0n explained in another thread how to get the 1.3.2.7 drivers working for a range of dongles. Unfortuantely the link in that post to ACBTUSB.EXE no longer works. From the filename, and what I have read on the Socketforum, this appears to be Anycom software, which does not implement the hardware check. So if anyone has this file, or the entire Anycom 1.3.2.7 software, please post on here a link, or just a note to say you have it, and I will PM you an email address so you could send it to me and i coudl be forever in your debt!!
I think there's quite a few people who could do with that file. It must be the only way to get the Widcomm 1.3.2.7 drivers working properly on this dongle. | |
|
ESTOR
Joined: Apr 20, 2002
Posts: > 500
From: Singapore
PM |
Well, the download from Mitsumi kind-of work after the .inf modification, in that I could send/receive stuff between phone and PC. Billionton used to have their 1.3.2.7 only last week but it's been removed. It's big at 20Mb+.
Belkin has 1.2.2.16 which also works very well, except it doesn't have audio gateway or headset and it has this nastly Belkin logo appearing in the "My Bluetooth Place" windows. The download is still available.
[ This Message was edited by: ESTOR on 2003-06-11 06:48 ] |
onionz
Joined: Feb 21, 2003
Posts: 24
From: London, UK
PM |
It seems like all the manufacturers are removing their 1.3.2.7 downloads - perhaps WIDCOMM is asking/making them?
The acer drivers are still available, so i'm trying them next. But it seems those Anycom ones DEFINITELY work - so again, anyone who's got them, please share the goodies!! |
Nockey
Joined: Jun 01, 2003
Posts: 20
PM |
Hi, onionz
download link for TDK licence
http://www.sponsorswin.com/bluetooth/
you can use tdk 1.3.2.7 with that licence, just overwirte the original file
download link for tdk 1.3.2.7
http://www.tdksys.com/download/TDK1.3.2.7.ZIP
certainly, you must modify the .inf file that c0mm0m provided
I use the same mitsumi use dongle as you. It's work with tdk 1.3.2.7
and I also try that way as tdk 1.3.2.19, everything ok but just can't sync.
Download link for tdk 1.3.2.19
http://www.tdksys.com/support/drivers/range.asp?id=1
any question, pm me
[ This Message was edited by: Nockey on 2003-06-11 17:38 ] |
onionz
Joined: Feb 21, 2003
Posts: 24
From: London, UK
PM |
Nockey: Thanks very much for your help - i'm gonna try that right now and report back here with my result!!
ps. Tried the acer - software, asked for license information. First time i've seen it ask that! |
onionz
Joined: Feb 21, 2003
Posts: 24
From: London, UK
PM |
It works! Finally!
Thanks again Nockey. | |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2003-06-10 23:49
