| Author |
HBH-60 not working with Voice Dialing |
dacr
Joined: Mar 31, 2003
Posts: 1
PM |
HBH-60 works great, I can answer/end calls by pushing the call button on the headset, but I cannot use voice dialing with it, nor can I record voice tags. Any ideas?
firmware ver: R3A023 | |
|
derinh
Joined: Oct 31, 2002
Posts: 14
From: Canada
PM |
I'm using same firmware as you, and mine works.
To use voice-dialing, you need to have Bluetooth set to ON, not Automatic. this way the phone is always "listening" for the headset.
Secondly, I had trouble recording voice commands at first, but found that I had to do the following:
1) Push the call button on the headset... beeps and the phone says "voice dailing not configured, enter settings?"
2) Press Yes on phone, then go through the different voice command menus and record as you normally would. If you delay too much in between, the headset will disconnect and go back into standby. Just press the call button again and pick up where you left off...
Hope this helps.... good luck.
p.s. there are some other more lengthy posts on this... suggest using the feature, if you haven't already... good luck!
|
Brimme
Joined: May 18, 2002
Posts: > 500
From: Netherlands Amsterdam
PM |
DOes anyone knows how to do this on a P800?
 P900 + P800 + K700i + T68i+ HBH-60 + ms duo128 | |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2003-03-31 22:36
P900 + 
