| Author |
P800+XP home edition-how to install drivers of modems? |
freeloader
Joined: Mar 16, 2003
Posts: 96
From: Greece
PM |
Hi mates.Just bought a IBM R31 with WinXP and allthough I installed the P800 PC Suite several times it doesnt complete with the Dial up networking wizard.Do I have to install drivers of the modems found on the cd rom and how,also how can I verify the port allocated is enabled?All these questions seem huge now but cetainly someone out here could help out with a good answer,l really would appreciate this highly.One more thing,lets all wish for a quick ending of the Iraq war and no further implications following.Awaiting for a reply,I remain a freeloader . |
|
|
Bogman
Joined: Feb 22, 2003
Posts: 123
PM |
To install the modem driver you need to do the following.
Open "control panel" > select "phone and modem options" > click on the modem "TAB"
Click on add > check "don't select my modem" and then Next
Select Ericsson from Manufacturer insert your P800 disc and then select Have Disc>select your drive and then click ok
You can now select the drivers you need
The Bogman  P800  TDK BUD  HBH-60 |
thatsok
Joined: Mar 02, 2003
Posts: 23
PM |
Have same problem...do as above but only comes up with modem connections for IR,Bluetooth,or serial,no modem connection for usb cable. But if you look in the modem section of the cd there is a modem file for usb cable connection. p800usb.mdm. But it doesnt transfer. ???????????
Help!!!!!! |
Bogman
Joined: Feb 22, 2003
Posts: 123
PM |
You should have "Ericsson Serial modem" install that one
The Bogman P800 TDK BUD HBH-60 |
freeloader
Joined: Mar 16, 2003
Posts: 96
From: Greece
PM |
well,dear bogman,I did follow your instructions but serial is not usb etc. so I tried infra ,worked until a certain point to set up the DUN wizard.Now I dont know how to change the com ports,because when usb connected it shows com 5 conected but the modem either ir or serial is on com 1 ,how do I change that.Bogman many thanks for your precious help,if you can please kindly reply.
This message was posted from a P800 |
Bogman
Joined: Feb 22, 2003
Posts: 123
PM |
In "Phone Connections Link" (broken double sided arrow in task bar) make sure you have the "USB COM PORT 4 NOT CHECKED"
You need to install the "Serial Modem" like I said in previous post from your p800 DISC, install the modem on COM PORT 4
In "Phone Monitor" make sure you have COM PORT 4 ENABLED
Run the "Dail Up Networking Wizard" and follow the instructions selecting "Serial Modem on COM PORT 4
I'm posting this using the P800 modem
Let me know if you need any additional help
Don't forget when you want to sync your phone tick the USB COM PORT 4 and change you settings on the p800 back to PC
_________________
The Bogman 
P800 
TDK BUD 
HBH-60
[ This Message was edited by: Bogman on 2003-03-22 20:00 ] |
freeloader
Joined: Mar 16, 2003
Posts: 96
From: Greece
PM |
Dear Bogman,I followed again your very good directions and everything happened as you said BUT it didnt get finally connected.Even when I enabled COM 4 on phone monitor,the phone links properties showed COM 4 not connected.Strangly in pc mode(p800)it connected,so when I switched back to modem mode it disconnected.For some reason the P800 modem is not connecting,on Device manager after query modem function it said if the hardware is in the HCL list and compatible with Windows.Im really confused and sorry to be annoying for you with all my questions but Im surely missing something,I even tried the whole thing yesterday with Irda and I completed the whole DUN wizard,but it didnt connect,hardware problem it said.So finally if you could suggest some solution please do so,if you want you can also email me to rostropol@yourwap.com.Once more thank you for all your assistance.P800 is now the big player in the field,a true winner.
This message was posted from a P800 |
freeloader
Joined: Mar 16, 2003
Posts: 96
From: Greece
PM |
Dear Bogman,I finally connected this is my first message through web thanks to you.I cannot send you email through yourwap.com.I owe you now and am obliged.One more thing>the two little screens show 9.6 kbps speed and the wireless link with P800 inframodem show 115200 bps is this ok or can I increase the 9.6 kbps speed,presently it works fast enough and only with this speed.Many thanks again,its amaizing. |
freeloader
Joined: Mar 16, 2003
Posts: 96
From: Greece
PM |
Bogman,finally everything is fine 115 kbps in modem data amount transfer and when I click on infrasign it shows 115200 bps wireless link with P800.Everything is fast and fine,ok.I prefer the IR link,and 115kbps is fast enough,dont you agree?
This message was posted from a P800 |
Andy_P
Joined: Jun 10, 2002
Posts: > 500
From: Warwickshire
PM |
If its on gsm dialup you're browsing at 9,600 bps max..
Depending on yer service provider you will get up to 57,600bps on gprs.
The 115,00 is only showing the port speed..
|
freeloader
Joined: Mar 16, 2003
Posts: 96
From: Greece
PM |
IM REFERING TO GPRS CONNECTION.Presently the two little screens show 460.8 kbps and the infrared symbol shows 115200 bps.Im satisfied with speed and response,but I just cant get the USB to work it shows not connected and when I use the new dialup connection it says com port used by another application,exit that application first. Anyway if I wont solve this Im with Irda. freeloader out.Hopefully these connections will get easier to set up in the future. |
freeloader
Joined: Mar 16, 2003
Posts: 96
From: Greece
PM |
Finally usb worked fine.The error was I discovered,the com4 was registered to use the Syncstation,so that blocked any modem function of the P800. |
|
|
Posted: 2003-03-21 22:28
