Author |
My k800i succeeded at flash |
AlexRussell Joined: Oct 27, 2011 Posts: 8 PM |
So, my k800i is dead (won't start), so I tried flashing it, the flash succeeded, but the phone still don't start...
So whats the problem with my phone?
What else should I try to revive it?
It has a corrupted EROM?
Should I try to update it with SE update service?
Thank you.
My XS++ log.
08:05:26| XS++ v3.1 (Darwin) Ready !
08:05:26| Executed on Microsoft Windows XP
08:05:39|
08:05:39| Attempting to open the interface...
08:05:39|
08:05:39| TURN OFF PHONE!
08:05:39| Hold 'C' button on phone and connect phone NOW.
08:05:39| You have 30 seconds...
08:05:39|
08:05:58| Baseband ID: 9900
08:05:58| Protocol Version: 3.1
08:05:58| Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K810)
08:05:58| ...using IMEI name
08:05:58|
08:05:58| Profiling SEMC phone...
08:05:58| Platform: DB2020
08:05:58| OTP CID: 51
08:05:58| EROM CID: 52
08:05:58| EROM Color: Red
08:05:58| IMEI: 35570401xxxxxx
08:05:58| Phone ID: K800
08:05:58| Region: MEDITERR
08:05:58| CDA: CDA102568/1 R2A
08:05:58| Firmware Version: R6BC002
08:05:58| EROM: R3A099
08:05:58| Ready for operation!
Any firmware for my k800i so I can turn it on?
[ This Message was edited by: AlexRussell on 2011-10-29 16:08 ] |
|
Lollylost100 Joined: Oct 06, 2009 Posts: 459 From: UK PM, WWW
|
Try an update but your best bet would be paying for an Omnius licence and fixing it that way. |
AlexRussell Joined: Oct 27, 2011 Posts: 8 PM |
On 2011-10-29 15:47:48, Lollylost100 wrote:
Try an update but your best bet would be paying for an Omnius licence and fixing it that way.
Ok, I will try, but I want to know whats the problem with it, its a corrupted EROM, right? |
Lollylost100 Joined: Oct 06, 2009 Posts: 459 From: UK PM, WWW
|
What does it do when you try to start it? |
AlexRussell Joined: Oct 27, 2011 Posts: 8 PM |
I haven't update it yet with SE service updater, it still doesn't start, I tried with SEtool2 I clicked "Unlock/Repair" button this is the log...still not working ):
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
"Unlock/Repair" button log:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35570401478243 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
USERCODE reset to 0000
Elapsed:27 secs.
"Read GDFS" button log:
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35570401478243 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
stated number of vars:1317
Found:832 variables
Found:440 variables
Found:45 variables
GDFS read all done, GDFS_35570401478243.BIN written
Phone detached
Elapsed:37 secs.
[ This Message was edited by: AlexRussell on 2011-10-29 16:57 ] |
Lollylost100 Joined: Oct 06, 2009 Posts: 459 From: UK PM, WWW
|
What does it do when you try to start it? Screenblink white? Blinking red diode? |
AlexRussell Joined: Oct 27, 2011 Posts: 8 PM |
It doesn't start at all, no signal, completely dead, it did blink the red diode because of the uncharged battery, but now not. |
Boysie Joined: Jan 17, 2008 Posts: > 500 From: Southampton, England PM |
You have a non standard EROM. Use Omnius to reflash R3A022.
|
|