| Author |
K610 > W660 (R8BB001) |
mr_lou
Joined: Nov 14, 2002
Posts: 403
From: Denmark
PM, WWW
|
Trying to flash an old K610 to W660 firmware just for the fun of it, following this very detailed and useful guide.
EDIT: Seems I can't use the url tag? Well here's the link to the guide then.
http://www.myforum.a site/showthread.php?t=38528
I've done step 1, 2 and 3 with success. The phone now boots, and everything is as described; everything works except the walkman. But I'm stuck at step 4.
XS++ has no problem flashing the MAIN firmware, but when trying to flash the exact same file with SETool2Lite, I get the "embedded flashloader not responds !" error.
So I've searched a lot on Google of course, and the general reply people get is to
- try another cable,
- install the latest USB driver (from SETool2Lite),
- try another USB port on your PC,
- try another firmware file,
Since I've tried all of the above now without any change in the result, I'm posting here.
In step 4 the main firmware is flashed again (using SETool2Lite), bypassing DB2020 security. This is the step that fails. It never gets to the vkp script.
The phone is of course 100% charged, and I do of course hold the C button before inserting the cable.
Any ideas?
[ This Message was edited by: mr_lou on 2010-10-25 07:26 ] |
|
|
Boysie
Joined: Jan 17, 2008
Posts: > 500
From: Southampton, England
PM |
Can I see the log from SETool2lite please. Have you tried doing the bypass with JDFlasher?
|
mr_lou
Joined: Nov 14, 2002
Posts: 403
From: Denmark
PM, WWW
|
Didn't try with JDFlasher yet no. It's been a long time since I tried FAR Manager. (Put some menu-icons on my W800 long time ago).
I just tried again here at work, with another cable and obviously another computer. Still the same. Here's the log.
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:000000000000000 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:000000000000000 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:506 secs.
|
Boysie
Joined: Jan 17, 2008
Posts: > 500
From: Southampton, England
PM |
Hmm odd. Looks as though the bypass was successful but stops before patching the qapatch. I'd try with JDFlasher.
|
mr_lou
Joined: Nov 14, 2002
Posts: 403
From: Denmark
PM, WWW
|
I just tried with JDFlasher.
Gives me this error, regardless of choosing ofs or oflash.
 |
Boysie
Joined: Jan 17, 2008
Posts: > 500
From: Southampton, England
PM |
Wrong script! You are DB2020, not DB2012!! 
Select DB2020 script and select BFlash.
[ This Message was edited by: Boysie on 2010-10-25 09:41 ] |
mr_lou
Joined: Nov 14, 2002
Posts: 403
From: Denmark
PM, WWW
|
Ah, missed that.
The new error is something along the line of "full plugin installation required", when I enter bflash.
So searched briefly for another download of the plugin, but it seems to be just a folder to be copied into the plugin folder, so not sure what full plugin installation means. |
Boysie
Joined: Jan 17, 2008
Posts: > 500
From: Southampton, England
PM |
Use this JDFlasher: http://www.4shared.com/file/l[....]PF_v3_CXCpatcher_v5_JDfla.html
|
mr_lou
Joined: Nov 14, 2002
Posts: 403
From: Denmark
PM, WWW
|
Download fails on that link at 99,99% |
Boysie
Joined: Jan 17, 2008
Posts: > 500
From: Southampton, England
PM |
I'm afraid the problems lies with you. The file is good.
|
mr_lou
Joined: Nov 14, 2002
Posts: 403
From: Denmark
PM, WWW
|
mkay, will try from home then. Because here at work it fails both with IE and Firefox. |
Boysie
Joined: Jan 17, 2008
Posts: > 500
From: Southampton, England
PM |
Ok then. Use this: http://www.justdanpo.cheb.ru/data/projects/gsm/jdflasher.7z
|
mr_lou
Joined: Nov 14, 2002
Posts: 403
From: Denmark
PM, WWW
|
The download works fine from home.
And JDFlasher ran through all 3 unplugs/reconnect. Last thing that pops up is the "Remember to flash MAIN" message. Then it fails:
SetDirectory(setdir(setmode(doscript(qhldr(gethello(IOusb:getblock(time exceed))))))) |
Boysie
Joined: Jan 17, 2008
Posts: > 500
From: Southampton, England
PM |
Hmm...
Here's a guide. Apologies for the absence of screenshots.
http://forums.se-nse.net/topic/27775-advanced-usage-jdflasher/
|
mr_lou
Joined: Nov 14, 2002
Posts: 403
From: Denmark
PM, WWW
|
Looks like I'm doing what the tutorial says.
I wonder if it matters that I used DaVinci Client earlier to change color to brown. I forget why I did it, probably because I thought it was needed to apply some patches.
Later I changed color back again to red (supercid), also using DaVinci Client. Could this be the reason for the problems?
Can I do anything else with DaVinci? I'm not afraid to spend some money on it. |
|
|
Posted: 2010-10-25 08:07
