| Author |
M600i, Unable to boot, flash, update |
kunnucbz
Joined: Apr 15, 2010
Posts: 2
PM |
After I installed a theme, my M600i doesn't start-up. It freezes around 50% mark of the progress bar (with SE Logo) during the start-up.
I tried the SEUS: After I plug-in the phone (with C held... followed other instructions as well), the phone turns on and freezes at 50% mark... nothing happens... It never realizes that the phone is plugged.
I tried XS++: Here too, after I plug-in the phone, it turns on, the progress bar goes around 50% and ....nothing. I tried the SMARTPHONE option and the other one as well. Here's the log:
SMARTPhone:
09:56:26| Executing SEMC Smartphone Operations!
09:56:26| Please hold boot key ('@' or 'C') and connect device...
09:57:37| Disconnected... Unplug the phone
Without Smartphone checked:
09:54:46| TURN OFF PHONE!
09:54:46| Hold 'C' button on phone and connect phone NOW.
09:54:46| You have 30 seconds...
09:54:46|
09:55:17| Error: Cannot open phone communication port
09:55:19| Disconnected... Unplug the phone
I also installed USB Flash Drivers (though after connecting the phone, the Device Manager doesn't show any 'Generic Flash Device'. However it has the following:
1. SE M600 Composite Device
2. SE Mass Storage Device
3. SE seehcri Control Device
I can't find any other way of fixing this on the web and I've been struggling with it for last two days. If someone could help me, I'd be really thankful!
[ This Message was edited by: tranced on 2010-04-15 11:10 ] | |
|
kunnucbz
Joined: Apr 15, 2010
Posts: 2
PM |
Someone please help me with this...! | |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2010-04-15 06:39
