Esato

Forum > Sony Ericsson / Sony > Software, Firmware and Drivers > Debrand c905a

Author Debrand c905a
kevin347
Aino Black
Joined: Jan 26, 2010
Posts: 5
PM
Posted: 2010-01-26 20:43
Reply with quoteEdit/Delete This PostPrint this post


I just bought the SE 905a phone and following procedure to debrand it..I am having issues debranding it. I dont intend to buy any paid service if possible..



I have donwloaded A2Uploader (I installed the Gordon's Gate Drivers first)

I also downloaded A2 CDA File Generator V1.8 and also installed the Sony-Ericsson Update Service (SEUS).



1) Next, I ran A2 CDA File Generator and Selected the model (C905). (There is no option for C905a here)

2) I selected Americas (cda-number : 1209-4778 and cda-revision : R5A first and then also tried

Western europe cda-number: 1209-4774 and cda-revision:R6A).

3) I generate the "customize_upgrade.xml" file and connected the phone through USB and put the file in the tpapresetcustom folder then disconnected everything, remove the battery and now starting the SEUS Update service. SEUS is detecting the phone and everytime it's telling me that I have the Latest software. I tried different Europe CDA numbers and america CDA as described above but it didn't work.

Do i need to use any other CDA Generator or if someone could give me the CDA number, I could make the xml file and try it.

For some reason I am not able to debrand it.


Please help me out !!
[ This Message was edited by: kevin347 on 2010-01-26 19:44 ]
tranced
LG Nexus 4
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM
Posted: 2010-01-26 21:09
Reply with quoteEdit/Delete This PostPrint this post
What's your firmware version?

You need to turn on the phone in order to upgrade the CDA version on the phone. After that turn the phone off and go ahead with SEUS.
[ This Message was edited by: tranced on 2010-01-26 20:10 ]
I jay0726 | (+3, 0) | Clara, Evita, Mimmi & Victoria | My Pics | Do your job!
kevin347
Aino Black
Joined: Jan 26, 2010
Posts: 5
PM
Posted: 2010-01-26 21:23
Reply with quoteEdit/Delete This PostPrint this post
Btw, I am AT&T USA customer..

Here's the info A2 uploader is emitting when I connect the phone (hold the C button and click the File System tool button)..Is this what you are asking for?

ChipID:E800,EMP protocol:0401

PHONE STATE: "RETAIL"
FLASH CID: 0053
OTP LOCKED:1 CID:53 PAF:1 CERT:RED
LDR:2009-04-21 18:30 1202-0420_DB3210_CS_LOADER_APP_SDRAM_R2A081
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM TA
LDR:2009-04-21 18:29 1202-0421_DB3210_CS_LOADER_ACC_SDRAM_R2A081
LDR CAPS:SYSTEM FLASH SIGNATURE AUTH

Do you mean to say that before I start the SEUS to read the customize_upgrade.xml file, I need to turn on and off the phone, take the battery out, put it back and then start SEUS. How is the phone going to react to the new xml file at that point?



On 2010-01-26 21:09:30, tranced wrote:
What's your firmware version?

You need to turn on the phone in order to upgrade the CDA version on the phone. After that turn the phone off and go ahead with SEUS.
[ This Message was edited by: tranced on 2010-01-26 20:10 ]


[ This Message was edited by: kevin347 on 2010-01-26 20:24 ]
tranced
LG Nexus 4
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM
Posted: 2010-01-26 21:52
Reply with quoteEdit/Delete This PostPrint this post
After you upload the customize_upgrade file, you disconnect the phone from the A2uploader, take out the battery, reinsert it, turn on the phone, wait till it boots up, turn it off and then try to update with SEUS.
I jay0726 | (+3, 0) | Clara, Evita, Mimmi & Victoria | My Pics | Do your job!
Luhccas-U1a
Satio Black
Joined: Mar 24, 2008
Posts: > 500
PM, WWW
Posted: 2010-01-26 22:13
Reply with quoteEdit/Delete This PostPrint this post
Don't forget to take off memory card before use SEUS.
Edit: Use 1202-6123 number for C905a in customize_upgrade.xml
[ This Message was edited by: luhccas-c905 on 2010-01-26 21:14 ]
is a lifestyle!
kevin347
Aino Black
Joined: Jan 26, 2010
Posts: 5
PM
Posted: 2010-01-26 22:19
Reply with quoteEdit/Delete This PostPrint this post
OK, I will try it out..I missed that step. Btw, is 1202-0420 my original CDA Version??, if I need to roll back and go back to original AT&T version? If I put that CDA in the upgrade xml file, it should take me back ??

What region 1202-6123 CDA refers to??


Thanks !
tranced
LG Nexus 4
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM
Posted: 2010-01-26 22:35
Reply with quoteEdit/Delete This PostPrint this post
Just generate a new customize file with your original number. It won't do anything else but change the number.

I just found this:

1212-6123-AMERICA-Customized Brazil
[ This Message was edited by: tranced on 2010-01-26 21:36 ]
I jay0726 | (+3, 0) | Clara, Evita, Mimmi & Victoria | My Pics | Do your job!
kevin347
Aino Black
Joined: Jan 26, 2010
Posts: 5
PM
Posted: 2010-01-27 03:16
Reply with quoteEdit/Delete This PostPrint this post
OK, so I executed the step i missed and I could debrand it now. Thanks a lot !!!

But when I turned on the wifi and tried to access a webpage, I get following error :

" Communication error. Try again, turn off W-Fi or contact your provider for support"

How do I resolve this?? I am using the same wi-fi connection on my computer and it works..

TIA
tranced
LG Nexus 4
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM
Posted: 2010-01-27 04:35
Reply with quoteEdit/Delete This PostPrint this post
Try reupdating
I jay0726 | (+3, 0) | Clara, Evita, Mimmi & Victoria | My Pics | Do your job!
kevin347
Aino Black
Joined: Jan 26, 2010
Posts: 5
PM
Posted: 2010-01-29 02:34
Reply with quoteEdit/Delete This PostPrint this post
It didn't work. Although I notice that when I tried to use the wifi at my office it worked few times and it was giving me errors few times. So was kind of hit and miss..It doesn't work with my home wifi though..I am not completely sure what's the issue here..
ipkis_roger
Model not set
Joined: Jan 31, 2010
Posts: 1
PM
Posted: 2010-01-31 01:44
Reply with quoteEdit/Delete This PostPrint this post
Hi Guys,

Ok, i have followed all the steps i.e.

1) Generate a custom_upgrade.xml with CDA as



1209-4778
R6A
bboyzahid



2) I restarted the phone and checked by going into the "Service Menu", and it did say:

Customization
1209-4778 R6A
1205-9083 R1BB026
ATT

3) Now when i use SE Update Service it say it already has the latest software. I dont know what is going wrong

I tried using different CDA'a too but still same problem.

Please help.

Thanks,
Ipkis
lestatsjo
Model not set
Joined: Apr 04, 2010
Posts: 7
PM
Posted: 2010-04-05 19:34
Reply with quoteEdit/Delete This PostPrint this post
after trying to look for the 905a guide to debranding/flashing, i was hoping to instead 'borrow' some advice off this thread as well. ipkis i hope you dont mind, since i also share the same dilemna with you.

unfortunately, i dont know jack when it comes to flashing a phone, and normally would pay 50 clams to have it done (but that was a LONG time ago, around 2k i think)...

so, aside from the battery part, im still reading and re-reading the guides available. (good thing i printed it)...

any chance i can get links to the proper software i should download?

im a tad confused about which A2uploader i should get, as well as tracking the SEUS software being mentioned.

i didnt want to start yet another post, but was hoping to piggyback off this one (with all due respect to the OP).

Thank you very much for such hard work folks, we truly appreciate your community in helping us 'common folk'.
Access the forum with a mobile phone via esato.mobi