| Author |
C902 does not turn on - Help! |
zide
Joined: Jul 20, 2009
Posts: 481
From: Portugal
PM |
Hello,
Yestesday, I changing the housing/fascia of my fully working c902 (used a tuturial on youtube) and everything went fine until I finally assembled everything and found out that it wasn't turning on... I've checked everything a thousand times, every connector and piece and all seems normal but I can't solve this problem. There isn't any signal when connect it to the power either. I just feel the battery getting warmer, nothing else (the battery should be fine since I tested with a backup battery which didn't work either).
What could be the cause? Please, I'm getting mad with this problem, your help will be very apreciated.
(Could it be anything ti do with a wierd sticker which gets connected with the 2 pins under the main central part?)
Thanks in advance. | |
|
centur
Joined: Jun 10, 2007
Posts: > 500
From: Bulgaria
PM, WWW
|
On 2010-01-06 05:38:25, zide wrote:
Hello,
Yestesday, I changing the housing/fascia of my fully working c902 (used a tuturial on youtube) and everything went fine until I finally assembled everything and found out that it wasn't turning on... I've checked everything a thousand times, every connector and piece and all seems normal but I can't solve this problem. There isn't any signal when connect it to the power either. I just feel the battery getting warmer, nothing else (the battery should be fine since I tested with a backup battery which didn't work either).
What could be the cause? Please, I'm getting mad with this problem, your help will be very apreciated.
(Could it be anything ti do with a wierd sticker which gets connected with the 2 pins under the main central part?)
Thanks in advance.
Try update via SEUS
If SEUS cann't update try flashing with A2uploader.
|
mrjulius
Joined: Jun 19, 2009
Posts: > 500
From: Pleasant Hills, Manila
PM, WWW
|
is there a blue light only or nothing else?
if theres a blue light the problem is in the software..
if theres no light.. lost connector 
 Xperia Arc S, AinoU10i, x10m, c902, k750i,  |
zide
Joined: Jul 20, 2009
Posts: 481
From: Portugal
PM |
News - After some stuff done to do phone, it started to vibrate. It was vibrating only from 10 to 10 seconds, no screen signal, and I flashed it EROM and updated with seus. Now, it vibrates just once (as it usually does when turned on) but the screen remains off... I would think that the display is damaged but the phone does not sound as it is starting up... Omg...
Well, tomorow I'll try a few more things...
[ This Message was edited by: zide on 2010-01-07 05:47 ] | |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2010-01-06 05:38
Xperia Arc S, 
