| Author |
Killed my k800i flashing it, help needed please |
Snoopzster
Joined: Oct 25, 2009
Posts: 3
PM |
Hi all,
Apologies if this same question has been asked a million times but i searched and couldn't find a clear answer.
I've got an K800i on 02 which was corrupting my text messages randomly so i decided to try and flash the phone to repair it.
I flashed it using XS++ and the MAIN and FS files downloaded from 'sek750i' in the CDA 52 section but after switching on the phone it asks me for a PHONE LOCK code and i type in the code of 1235 which is what it was before i flashed it and it then gives me this error message (Configuration error. Please contact your network operator or service centre).
Is anyone able to help me out in getting the phone back into life as i've no clue really.
This is the information i got from XS++ about my phone BEFORE i flashed it:-
Platform: DB2020
OTP CID: 51
EROM CID: 52
EROM Color: Red
IMEI: 35908701xxxxxx
Phone ID: K800
Region: EUROPE_2
CDA: CDA102511/100 R8A
Firmware Version: R1KG001
EROM: R3A022
I hope you pros will be able to get this up and running again.
Thanks for all help. |
|
|
sitnet
Joined: Jun 30, 2008
Posts: 325
PM |
Well I won't say I'm a pro or anything but here goes:
You can't just flash with MAIN and FS, you have to write customization afterwards. OK so I don't know how XS++ works (can't remember rather), so you'll have to use A2uploader. Download it from here: http://www.4shared.com/file/6[....]A2Uploader_22-09-2009.html?s=1
and the USB flash drivers: http://www.4shared.com/file/1[....]cc/Gordons_Gate_setup.html?s=1
Install A2uploader first and then the Gordons gate USB flash drivers. After that download this: http://www.seusers.com/forum/[....]inks.php?catid=481&linkid=7612 (you have to register but it is free and quick, same as with esato)
Then do this:
Open up a2uploader and do the following
What to do with the custompack:
Add the custompack you just downloaded (still ZIPPED!!!) to misc files with the “…” button.
Now press "flash" and connect the phone again holding C. Then wait till A2 uploader says “Ready’ again and disconnect.
Then switch on the phone and wait till it is finished.
Good luck!
|
Snoopzster
Joined: Oct 25, 2009
Posts: 3
PM |
Thanks that was it, all working perfectly now! Hopefully this will solve the corrupted text messages i had been getting.
|
suresh86
Joined: Jun 22, 2008
Posts: 201
From: Kathmandu,Nepal
PM, WWW
|
K800 works with A2 uploader? |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
No, it won't. The k800 is A1. You need either setool, xs++ 3.0 or 3.1, or far manager+jdflasher.
|
suresh86
Joined: Jun 22, 2008
Posts: 201
From: Kathmandu,Nepal
PM, WWW
|
I know it.
But whats the thing that has been said in the 1st reply?
[ This Message was edited by: suresh86 on 2009-10-26 12:36 ] |
Snoopzster
Joined: Oct 25, 2009
Posts: 3
PM |
I used SEtools2 to install the custom files. |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
The "Configuration Error" appears if you do not have uploaded a custom to your phone 
|
|
|
Posted: 2009-10-25 16:41
jay0726 | 
