Esato

Forum > Sony Ericsson / Sony > General > K800 Won't Turn On!

Author K800 Won't Turn On!
Joe3000
Model not set
Joined: Apr 19, 2009
Posts: 5
PM
Posted: 2009-04-19 14:03
Reply with quoteEdit/Delete This PostPrint this post
I was loading some music onto my K800i and I thought it had finished to unpluged the USB cable but the screen froze with just the backlight on.

I turned it off but could not turn it on.

The red led light at the side flashes around 4-5 times when I press the power switch but that is it.

I read somewhere to download SE Tool 2 lite but am not sure what to do.

Any ideas?

Thanks
Goldmen
C901 Black
Joined: Oct 07, 2007
Posts: > 500
From: Bulgaria
PM, WWW
Posted: 2009-04-19 14:38
Reply with quoteEdit/Delete This PostPrint this post
Joe3000
You should find a way to check battery and charge it if empty...
Next:
1/Try to clean phone`s connector
2/download SETool Lite 1.08
3/start it
4/push "Identify" button
5/hold together 2 and 5 on phone`s keypad,not "C"
6/plug the cable and wait a few seconds...
Now SETool must be recognize your phone...
If not...sorry... ,you need service...
K800 -> C901
K800 photos / C901 photos
Joe3000
Model not set
Joined: Apr 19, 2009
Posts: 5
PM
Posted: 2009-04-19 14:53
Reply with quoteEdit/Delete This PostPrint this post
The Windows found new hardware message came up but SEtool is still searching.

How long do I have to hold down 2+5 for?

Thanks

edit: stopped it after an hour or so

Can't load ID loader !
Elapsed: 6225 secs.
[ This Message was edited by: Joe3000 on 2009-04-19 15:37 ]
Goldmen
C901 Black
Joined: Oct 07, 2007
Posts: > 500
From: Bulgaria
PM, WWW
Posted: 2009-04-20 11:59
Reply with quoteEdit/Delete This PostPrint this post
Your PC needs flash drivers,I think.
Also SEUS will install them automatically.
Then try with SETool again...
K800 -> C901
K800 photos / C901 photos
Joe3000
Model not set
Joined: Apr 19, 2009
Posts: 5
PM
Posted: 2009-04-20 18:22
Reply with quoteEdit/Delete This PostPrint this post

On 2009-04-20 11:59:36, Goldmen wrote:
Your PC needs flash drivers,I think.
Also SEUS will install them automatically.
Then try with SETool again...



Do I have to point SETool at the flash drivers from SEUS?

I have downloaded SEUS.
Maresch
Satio Black
Joined: Apr 11, 2005
Posts: 63
From: Germany
PM, WWW
Posted: 2009-04-21 12:14
Reply with quoteEdit/Delete This PostPrint this post
No you can install SEUS which includes and automatically installs the drivers, or when you computer asks next time for drivers, install them manually.

Joe3000
Model not set
Joined: Apr 19, 2009
Posts: 5
PM
Posted: 2009-04-23 18:29
Reply with quoteEdit/Delete This PostPrint this post
I've installed seus.

Started SE tools.

Pressed 'identify' in se tools.

Plugged in phone whilst holding down 2+5.

How long should this take?

Thanks
Access the forum with a mobile phone via esato.mobi