| Author |
HELP ME! Sony Ericsson K800i |
imthizam
Joined: Nov 03, 2008
Posts: 8
PM, WWW
|
Please Help ME!! I have a Sony Ericsson K800i MOBILE and i lost my lock code Please Tell Me How To Unlock My Phone PLEASE!
I am a beginner so tell me step by step. |
|
|
Residentevil
Joined: Feb 29, 2004
Posts: > 500
From: Raccoon City, USA
PM, WWW
|
Well the default lock code is 0000. If you changed it from the default, then you have to dig into your drawer to find it.
Tough times don't last, tough people do!
Free Tibet |
imthizam
Joined: Nov 03, 2008
Posts: 8
PM, WWW
|
What is the software to unlock my phone? |
Muhammad-Oli
Joined: Jun 13, 2004
Posts: > 500
From: The NZ of L
PM |
There is no software as far as I know that will unlock your phone in that way. The only way to fix your problem is to somehow remember your code.
I think there is unlocking software, but it is not for the purpose you are after, it is for phones that are locked to a network.
This message was posted in the mail
2008, 2009, 2010 Best Australasian Member. |
yea g
Joined: Jul 02, 2008
Posts: > 500
From: New Zealand
PM, WWW
|
If you can use xs++ afaik it can reset your lock code to 0000
|
Muhammad-Oli
Joined: Jun 13, 2004
Posts: > 500
From: The NZ of L
PM |
On 2008-11-04 04:36:50, imthizam wrote:
I am a beginner so tell me step by step.
You'll have to explain better than that yea g. 
_________________
[ This Message was edited by: Muhammad-Oli on 2008-11-04 04:10 ] |
aremaboy
Joined: Nov 27, 2004
Posts: > 500
From: Malang, Indonesia
PM |
You should buy a credit at www.wotanserver.com , reflash the phone, and reset the phone lock to default. |
yea g
Joined: Jul 02, 2008
Posts: > 500
From: New Zealand
PM, WWW
|
On 2008-11-04 05:09:29, Muhammad-Oli wrote:
On 2008-11-04 04:36:50, imthizam wrote:
I am a beginner so tell me step by step.
You'll have to explain better than that yea g.
_________________
[ This Message was edited by: Muhammad-Oli on 2008-11-04 04:10 ]
Argh! give me a few minutes 
|
imthizam
Joined: Nov 03, 2008
Posts: 8
PM, WWW
|
HOW TO GET THE SEMC FLASH DRIVER |
yea g
Joined: Jul 02, 2008
Posts: > 500
From: New Zealand
PM, WWW
|
To be able to open the phone in "flash mode" you need to have Flash drivers installed for your phone. They can be installed like the folowing:
- Turn off the phone, remove the SIM card, and let the battery out of the phone for 30 seconds. Then put the battery back again (do not turn on the phone). Then connect your phone to the PC through the USB cable (DCU60) while holding the "C" button pressed down on your phone all the time. Then "Windows new hardware wizard" will recognize the phone as "Flash device". Here you will have options to connect to the internet to search for driver software or install it from CD or a folder in your pc. Select the "browse" option and navigate to the location where you downloaded your Flash drivers for the phone (the epiusb.sys file) and then install it. If you are told that the driver is not digitally signed, click "Install Anyway". Once the flash driver is installed, restart the PC.
Download both of the drivers on here:
http://www.iprotebe.cz/usb_drivers-flash-drivers-sce2111.html
|
imthizam
Joined: Nov 03, 2008
Posts: 8
PM, WWW
|
THANKS |
yea g
Joined: Jul 02, 2008
Posts: > 500
From: New Zealand
PM, WWW
|
Just remember 2 things
the first one is - always backup your GDFS (found on the GDFS tab of xs++)
And the second - Be careful
|
imthizam
Joined: Nov 03, 2008
Posts: 8
PM, WWW
|
the link is not working please help |
yea g
Joined: Jul 02, 2008
Posts: > 500
From: New Zealand
PM, WWW
|
Oh sorry their site is down now. Ill give a search in my downloads and see if I can find the one I downloaded way back in june
EDit:
Here they are:
http://yea-g.site50.net/epiusb.zip
http://yea-g.site50.net/ggsemc.zip
_________________
Jsut=Just, In my new way of spelling
Check out the Esato New Zealanders thread, we have cookies!!
[ This Message was edited by: yea g on 2008-11-04 04:38 ] |
bishshoy007
Joined: Dec 11, 2007
Posts: 146
PM |
Whats up with you SE-Dedicated guys?
Heres the trick:
1. Download SETool Lite: http://www.4shared.com/file/33895464/6e3e4466/SETool2.html
2. Skip this step if you already have installed the USB drivers: Recommended to READ ONCE
Download SEUS from here:
http://www.sonyericsson.com/c[....]ate_Service_Setup-2.8.5.12.exe
Requirements:
Internet connection (preferably broadband)
DCU-65 USB cable
For updating PC cards, you need a PC card slot.
Recommended system requirements:
Intel® Pentium® 4, 2.0 GHz or higher, AMD Athlon
300 MB free hard disk space.
512 MB RAM
1 USB (2.0) port
Internet Explorer™ 4.0 Service pack 1, or later.
Adobe® Flash Player 8, or later. Available at Adobe
Operating System
Windows XP™ (Home or Professional) with SP2 or later.
Microsoft® Windows Vista™ (32-bit).
Installation instructions
Download the installation package to a temporary folder on your PC.
Run the downloaded file, and follow the instructions that appear.
Usage
Double-click on the Update Service icon on the desktop.
When the Update Service is launched, the application accesses the Internet to download content that is needed to be able to run the service. This may take several minutes, depending on your Internet connection speed.
Choose your preferred language and follow the instructions that appear.
Select your phone to be updated by running through the beautiful wizard. At last when it will show that of an update is available then you are ready to be updated. Or If it shows that your phone does not require an update means that your phone is already CID53 flashed. So sorry the only possible way then is to search your drawer.
If otherwise then at the moment it asks that your phone is ready to be updated, close the SEUS immediately. This will install the USB Drivers in the correct place.
3. Next Extract all files from the SETool Lite in a folder an run "setool2lt.exe".
Click Identify and follow the instructions on the screen.
If Identification is successful then only proceed.
4. After that its a simple step. Click Unlock/Repair button at the top and in a few seconds you are done. Your phone code will be resetted to 0000.
Pic Tutorial
 |
|
|
Posted: 2008-11-04 04:36
