Esato

Forum > Sony Ericsson / Sony > General > T 68 Microphone sensitivity

12  Next
Author T 68 Microphone sensitivity
Tutai
T68 grey
Joined: Feb 15, 2002
Posts: 9
From: New Zealand
PM
Posted: 2002-02-15 19:33
Reply with quoteEdit/Delete This PostPrint this post
I have had a couple of complaints about distortion when I am talking on my T68. I read that R2A software had improved this but also read somewhere that there is a hardware fix to reduce sensitivity. Any one know if this is the case?
UNION JACK
T68 grey
Joined: Jan 22, 2002
Posts: 22
From: Russia, Moscow City
PM
Posted: 2002-02-15 22:33
Reply with quoteEdit/Delete This PostPrint this post
Same problem =(
I've got R1B - old one. I'll wait 4 R2B with MMS support. Hope it'll change the situation.
john74
P800
Joined: Dec 21, 2001
Posts: > 500
From: GREECE/AUSTRALIA
PM, WWW
Posted: 2002-02-15 22:43
Reply with quoteEdit/Delete This PostPrint this post
Trick is that you gotta have the phone at least 3cm away from your mouth that way the others hear you clearly and DONT SHOUT into the sensitive T68 mic!!!
nikeow
T68 gold
Joined: Dec 17, 2001
Posts: 44
From: Malaysia(Where T68 is Manufact
PM
Posted: 2002-02-16 02:48
Reply with quoteEdit/Delete This PostPrint this post
HI John,

I just surfed through your website and sent you an email. Just need to know. I tested the T68 on a few separate occasions and found that the Mic is indeed Over Sensitive and tends to pick up a lot of backgorund noise. What I need to know is that according to your website, R2A solved this problem. How true is this?

Please confirm.

Thanks.
arnoldc
Sony Xperia V
Joined: Dec 14, 2001
Posts: > 500
From: Philippines
PM, WWW
Posted: 2002-02-16 03:12
Reply with quoteEdit/Delete This PostPrint this post
I don't have the problem since R1C. But this may be case-to-case.
yesuwa
T68 gold
Joined: Feb 01, 2002
Posts: 5
PM
Posted: 2002-02-16 04:43
Reply with quoteEdit/Delete This PostPrint this post
how about using a piece of adhesive tape to cover the hole of mic.....
lttan23
T68 grey
Joined: Feb 14, 2002
Posts: 29
PM
Posted: 2002-02-16 07:03
Reply with quoteEdit/Delete This PostPrint this post
my nightmare of the mic problem begin when i upgraded my T68m on R1c to R2A!!! after upgrading, no one manage to hear what i'm talking at all! when back to the servicing center twice to get it fix, got better but still noisy even when i'm in a quiet room talking!!!
Now my phone was taken in yesterday when i visited the ESC... Hope they can do something about it!!!


regards
Merkur
K700
Joined: Dec 05, 2001
Posts: 311
From: Iceland
PM, WWW
Posted: 2002-02-16 10:37
Reply with quoteEdit/Delete This PostPrint this post
I've had a problem with the mic also. But not when talking on the phone, but when inserting voice commands. I have 2 T68's at this time, the older one is manufactured in week 40 something, and the newer one in week 52.
When I record a voice tag on the older phone, it will be so loud that I have to move the phone from my ear. And when I try using the voice tags the phone just doesen't understand me. I even tryed adding voice tags via headset. And nothing works. I've had the phone updated with every SW version that has been out, I have also had the mic adjusted (something they can do in the workshops) and that has not solved the problem. The phone also gives a massive feedback if I enter the Microphone test menu. I'm beginning to believe this is a hardware issue.

The newer phone does not seem to have this massive feedback, nor the problem with voice tags as well as its battery is not "a little bit" loose and the keypad is fully illuminated. So I'm beginning to think that Voice Dial issues are hardware related!
nikeow
T68 gold
Joined: Dec 17, 2001
Posts: 44
From: Malaysia(Where T68 is Manufact
PM
Posted: 2002-02-22 01:27
Reply with quoteEdit/Delete This PostPrint this post
Hi guys,
Just bring this topic back up to the list to see if anyone has a new input.

apaman
T68 gold
Joined: Feb 19, 2002
Posts: 191
From: Italia - USA
PM, WWW
Posted: 2002-02-22 01:56
Reply with quoteEdit/Delete This PostPrint this post
well where I updated my firmware they tech there said that there is a fix for it it's a software and an hardware fix he did it and the problem is resolved
Tutai
T68 grey
Joined: Feb 15, 2002
Posts: 9
From: New Zealand
PM
Posted: 2002-02-22 20:42
Reply with quoteEdit/Delete This PostPrint this post
Thanks apaman, that was the answer I was looking for. I will contact Ericsson New Zealand again.
dmatacin
T68 gold
Joined: Dec 16, 2001
Posts: 13
From: Croatia
PM
Posted: 2002-02-23 17:14
Reply with quoteEdit/Delete This PostPrint this post
I owned R1B and now I have R2A T68, indeed they have different hardware also.Mic now have normal sensitivity.
arroyootje
C902 Black
Joined: Feb 01, 2002
Posts: > 500
From: UK-Belgium-Azerbaijan
PM
Posted: 2002-02-23 17:46
Reply with quoteEdit/Delete This PostPrint this post
Well, I have R1B and I thought everything was ok, but then I went to the service menu and did the microphone test and a loud peeping noise started....which I think means that the microphone is too sensitive....

So, I guess I have the same problem as you guys... I think it's a bit lame of not to notice this themselves in the beginning

C U
T68GR
T68 grey
Joined: Feb 20, 2002
Posts: 58
From: Greece
PM
Posted: 2002-02-23 18:05
Reply with quoteEdit/Delete This PostPrint this post
I have R2B now and the mic works fine with me! I had a document printed by ericsson here in Greece that was ment for the Ericsson Servive Points and they stated clearly that R2B is mostly a fix of the mic sensitive than just adding another game (naval fleet). I am pleased with R2B and the behaviour of my mic. At least Ericsson is trying to fix the problem.
z00
T610
Joined: Mar 23, 2002
Posts: 19
From: China
PM
Posted: 2002-03-24 00:10
Reply with quoteEdit/Delete This PostPrint this post
MY experience is with R1B even if I use HLH15 bluetooth headset the problem still the same.. People still complain my background noise..

Same question, how true the firmware R2A will fix the problem..
Access the forum with a mobile phone via esato.mobi