| Author |
K800i Flashing Infra red Problem |
Smurfk800i
Joined: Aug 25, 2008
Posts: 3
PM |
Hi ppl i have a se k800i with the red flashing light in the infrared port. I only just got it unlocked and wont turn on looking at the previous threads ive tried connecting it with wotanserver but just carries on saying Connect your phone pressing c and wont pick the handset up. I havent connected my handset up before to my pc its the first time and ive tried sony ericsson update service but wont pick phone up there either someone please help!!!!! |
|
|
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
Try connecting it to XS++. It may be the EROM damaged. If XS++ recognizes it, flash the EROM (use the erom flash file as MAIN firmware file in XS++ and hit the flash button)... Then reflash MAIN and FS + customize. If the phone hardware is not damaged, it should be fine. 
|
Smurfk800i
Joined: Aug 25, 2008
Posts: 3
PM |
Tried that too but wont pick the phone in there how do i install drivers for the handset if the handset aint being picked up at all? It dont even make a sound when the usb is connecting. It jus wont pick the phone up on the computer whatsoever. Getting really annoyed now cuz been trying it for a long time nw jus keeps flashing. |
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
Did you tried connecting the phone to PC turned off while holding the "C" button presed all the time (C button on the phone)??? If it is not hardware damaged it should be recognized like that...
|
Smurfk800i
Joined: Aug 25, 2008
Posts: 3
PM |
Hey got my phone to be recognised by pc but wont connect with wotan due to password and login details incorrect but i did leave that blank. |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
this guy sorted his problem:
On 2008-03-07 10:27:38, markmaslin wrote:
hi chaps
just thought i would let you know that i managed to get my phone working, it looks like it was the erom that was the problem, i tried to use the wotanserver tool but that didnt work so i used a tool from another website think it was called kulkendi, any ways here is the link to the information.
http://www.esato.com/board/viewtopic.php?topic=136077#post1833443
thanks again for all your help :0)
mark
use this
sory my englisch !
-first instal USBFlash Driver http://www.kulankendi.com/index2.php?pStrona=download
-in KK Client please option "EROM Update" and Login:kulan and Password:kulan
-now pres "Flasch"
...good luck
[ This Message was edited by: markmaslin on 2008-03-07 09:29 ]
|
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
Tnx for informing tranced.
Glad to know his phone is ok now.
|
Rookwise
Joined: Mar 22, 2004
Posts: > 500
From: UK. Phone:Samsung Galaxy A54 5
PM |
Or you could do what i did to fix my dad's K800.Go on the davinciteam website and register with them.Download their client and plug your phone in while holding down buttons 2 and 5. Once your phones detected choose EROM update which is free.You will also need to update the software on your phone as well afterwards.Again buy 10 credits and use Davinci to update your phone.All should be working fine.Also make sure you have plenty of charge in your battery. |
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
Yeah if the flash chip of the phone is not dead you should be able to connect it to wotan. I think they still offer free EROM flashing.
|
|
|
Posted: 2008-08-25 15:47
Sony Ericsson software/hardware support! 
