| Author |
My SE k750 convterted to w800 wont turn on! |
teddyshady
Joined: Jun 30, 2008
Posts: 7
PM |
hi there, first post sorry if it's in the wrong place!
i was flashing a friends k750 and all went jiggy, i went back to my one i converted a while ago to convert again with a better flash but i think i flashed it with a cid49 when my phone was cid36... i got an error and i tried again but no luck, when i tried turning on my phone i had no luck, completely dead, no red light in the infer red section, no charging, no nothing.
i read that SEUS 1 has recovery mode but i have no clue where ti download that from, google search returned no results..
I know this is an old phone, but i still use it every now and then and i hate that fact it's bricked!
If there's anyway to bring it back to life please advice me!
I only have the USB cable.
Thanks in advanced for all those who respond. |
|
|
totalgsm
Joined: Jan 12, 2007
Posts: > 500
From: totalgsm.org
PM, WWW
|
flash with again with same cid file, first try to read info with xs software.
|
teddyshady
Joined: Jun 30, 2008
Posts: 7
PM |
Phone has no power at all, so how an i possible flash it again? it doesn't function with the power up button, or the "hold C" button, or charging.
I know that if there was a red light flashing then i can do it, but there's absolutely no sign of life at the moment, i left the battery and sim card out of the phone overnight in hope it will miraculously turn on but i just tried it and no luck. |
Cold Fusion
Joined: Nov 21, 2006
Posts: > 500
PM |
Can u post up log?? Try KKclient (google it) to recover fone. Click on erom update and press flash, connect cable holding 2 + 5.
   I BEING DIFFERENT Previous Username: Ricky_bad420 |
teddyshady
Joined: Jun 30, 2008
Posts: 7
PM |
i only found v1.8 but apparently there's 1.9, anyway I tired that but no luck again...i might open up the phone today and see if any of the battery pins are damaged =s don't know what else to do!
i cant put a log up as nothing is happening to form a log!
EDIT**
No luck again, I opened it up, cleaned it up, made sure all connectors are tightly put into there position then tried to turn on again but no luck.
wtf have i done to my phone, i either removed it while flashing or flashed the wrong CID i have no clue!.. is this fixable with a cruiser or fighter cable?
[ This Message was edited by: teddyshady on 2008-06-30 21:50 ] |
totalgsm
Joined: Jan 12, 2007
Posts: > 500
From: totalgsm.org
PM, WWW
|
Are you sure you have a battery that is charged?
Just keep the charger connected for 1 hr and then try.
|
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
Why the hell you use KK client for W800???
Did you tried flashing your phone with XS++?
http://www.esato.com/board/viewtopic.php?topic=156090
download firmware from www.4shared.com
|
teddyshady
Joined: Jun 30, 2008
Posts: 7
PM |
i have 2 batteries and they are both 100%, i have tried leaving the phone on charge overnight with no sign of life and for the last time, once again
i can NOT flash it with ANYTHING as there is NO power coming out of the phone, it's dead!
No red light blinking, no charging, no nothing!
I tried SEtools, XS++, Gflash and every other program you can name...i have all the correct flashes (main & FS) and i have the Erom and GDFS backup but i can not power up the phone to do anything! |
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
Then you need to check if the phone hardware is OK... or rebuilt the SP area and format GDFS with service cable...
|
teddyshady
Joined: Jun 30, 2008
Posts: 7
PM |
phone hardware is fine, i opened it up and checked it yesterday... so my only choice is service cable? is that the same cable phone shops use to unlock phones? |
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
There are different types of service cables... SeTool, Cruiser and etc...
Cruiser should do the job for a problem like yours... It can rebuild the SP area of the phone and Format the GDFS... Works with USB - COM port interface (and (external battery) which enables the cable to revive dead phones...
|
teddyshady
Joined: Jun 30, 2008
Posts: 7
PM |
thank you, i will see where i can get one off these cables without splashing to much.
* I Can't Seem to find the cruiser cable with the External battery input to buy in the UK let alone ebay... although i found the SEtool 3 box with the cables for a silly price on ebay (under £20) and it's rrp is over £100 =s
I should just pop buy to an old friend's phone shop but his Nigerian, everything is business for them!
[ This Message was edited by: teddyshady on 2008-07-01 20:34 ] |
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
The one with the red/black wires is good cable for reviving dead phones... It uses external battery for power (not the USB port) 
Anyway, if you send your phone to service center, first they would check the hardware, then they will flash using standard methods... If that doesn't help they use SeTool box instead of cruiser... But for W800 and K750 cruiser works fine
|
Cold Fusion
Joined: Nov 21, 2006
Posts: > 500
PM |
Owh sorry my bad , i forgot its a w800i
I BEING DIFFERENT Previous Username: Ricky_bad420 |
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
No problem mate
|
|
|
Posted: 2008-06-30 00:59
