Author |
I got an K800 |
Turboguard Joined: Feb 11, 2008 Posts: 64 From: Sweden PM |
I got so tired of my K850i that I traded it for a K800 today.
And now I'm woundering what cool new things I can do with it.
I read a lot about "super camera drivers" etc. and unofficial FW's.
Give me some tips on what to do with it to make it awesome!
Thanks in advance  |
|
bryanjay420 Joined: Jan 18, 2008 Posts: 273 From: Pinas PM |
flashing firmware
patches
gfx
elfs
drivers
lighteffects
menu icons
|no  phone to mod| |i  my k800| |
Turboguard Joined: Feb 11, 2008 Posts: 64 From: Sweden PM |
I would be more than glad if you could link the things
And maybe tell me what it all means, and what they do
Thanks again.
_________________
I dead people!
[ This Message was edited by: Turboguard on 2008-05-22 17:43 ] |
mc_ryann Joined: May 15, 2008 Posts: 25 PM |
maybe its a good idea to play with it a couple of days before doing any modifications. |
Turboguard Joined: Feb 11, 2008 Posts: 64 From: Sweden PM |
On 2008-05-22 18:42:59, mc_ryann wrote:
maybe its a good idea to play with it a couple of days before doing any modifications.
How come?
It's not new or anything. And I had it before I got the K850 so I'm used to it...
I  dead people! |
mc_ryann Joined: May 15, 2008 Posts: 25 PM |
Oh.
start now by converting it to K810i . |
Turboguard Joined: Feb 11, 2008 Posts: 64 From: Sweden PM |
On 2008-05-22 19:21:52, mc_ryann wrote:
Oh.
start now by converting it to K810i .
That sounds like a good start.
But, how do I do that? Where can I find any links and tutorials for it?
What are the negative things?
I  dead people! |
eddie2020 Joined: Apr 28, 2008 Posts: 331 PM |
go download MAIN for ur k810i... MAIN GENERIC from here
http://www.4shared.com/dir/6864360/c7a0e6fc/sharing.html |
mc_ryann Joined: May 15, 2008 Posts: 25 PM |
first things first. BackUp your GDFS.................
BACKUP GDFS:
Shutdown phone .. Reinsert battery !
Start XS++
Click on connect in XS++
holding C connect phone to USB cable ! don’t leave C untill XS++ says ready for operation !
Connecting phone to XS++ is the same as connecting phone to SEUS.
Now In configuration select GDFS..
Click Backup GDFS…!
wait for few seconds..!! you get your GDFS back up file in XS++ backup Directory !
Keep the copies of your GDFS safely !!!!
.......................................................................................................................
Then you may beggin starting from here.
http://mobile.tipidpc.com/viewtopic.php?tid=2662&page=1
good luck
|
Turboguard Joined: Feb 11, 2008 Posts: 64 From: Sweden PM |
upgrade your K800i - K810i, ito po ang 10 simple steps :
1. Install USB Flash Drivers first...
2. XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXx
3. Download XS++ from: ...Ito po ang gagamitin nyong program for flashing your mobile phone. after downloading extract the zip file
4. make a folder named "files_to_upload" where XS will be, in our case : c:\\k810\\XS++\\files_to_upload
5. Download needed files from here ( K810i latest firmware MAIN and FS + Custpack with K800iLighteffects ). after downloading Extract the zip file. then kunin nyo yung laman ng custpack (yung TPA folder) tapos ilagay nyo sa files to upload folder nyo.
6. Turn off your phone, remove the battery and put it back again. open XS++ and click connect, now connect your phone using your USB while pressing "C". tapos magcoconnect na ang phone.
7. Ilagay nyo yung K810_R8BA024_MAIN_GENERIC_SM_RED52.mbn sa "flash main firmware"
8. Ilagay nyo yung
K810_R8BA024_FS_EUROPE_2_RED52.fbn sa "flash file system"
9. Check "customize file system" tapos sa select phone model piliin nyo yung "own custpack", ganun din gawin nyo sa "Select CDA or Region" piliin nyo din yung "own_custpack"
10. Click "flash", antayin nyo lang hanggang matapos. sasabihin disconnect your phone kapag tapos na. tapos open nyo na ang phone nyo and enjoy your K800i modded to K810i
So then just follow that after I downloaded k810 generic and XS++?
What is number 2?
I  dead people! |
mc_ryann Joined: May 15, 2008 Posts: 25 PM |
Sory about that. its a mistake. lets find the english version first.
first
make a backup of your gdfs.
Then download the need files here. http://www.4shared.com/file/30343903/280c9423/K800-K810.html.
Now you have 3 files
1. K810_R8BA024_MAIN_GENERIC_SM_RED52.mbn
2.K810_R8BA024_FS_EUROPE_2_RED52.fbn
3.Custpack with K800iLighteffects
Then make a folder named "files_to_upload" where XS++.exe will be.
Extract "custpactzip file " and get the "tpa folder" and put the "tpa folder" on your "file_to_upload folder'.
[ This Message was edited by: mc_ryann on 2008-05-22 19:15 ]
[ This Message was edited by: mc_ryann on 2008-05-22 19:21 ]
[ This Message was edited by: mc_ryann on 2008-05-23 08:54 ] |
Turboguard Joined: Feb 11, 2008 Posts: 64 From: Sweden PM |
So the light thingy of those files will fix the keypad bug?
_________________
I dead people!
[ This Message was edited by: Turboguard on 2008-05-22 21:28 ]
[ This Message was edited by: Turboguard on 2008-05-22 22:11 ] |
Turboguard Joined: Feb 11, 2008 Posts: 64 From: Sweden PM |
I got "configuration error" when I started the phone after flashing
What to do?
From here, what do I exactly do?
1.Downgrade back to K800?
2.Update to Cid52?
3.Then flash like I just did again?
My questions are now, how do I do the following 2 first steps?
What files do I need? Is there another tutorial to this and will the lightpack fix the lightbug I read about?
Will this update form k800-k810 make my phone better when it comes to camera etc?
[ This Message was edited by: Turboguard on 2008-05-22 22:27 ] |
Turboguard Joined: Feb 11, 2008 Posts: 64 From: Sweden PM |
I SOOO REGRET DOING THIS!
HOW DO I GET BACK TO K800i?!
I DID A BACKUP OFF THE THINGS.
TELL ME PLEASE
I  dead people! |
InterceptorF Joined: May 21, 2007 Posts: 7 PM |
You got a configuration error because you didn't customize your file system with a customization pack.
http://www.topsony.com/forum/showthread.php?t=6671
Look at Step 4) Customizing Your Phone
If you want to revert back to a K800 you need to reflash with K800 firmware. |
|