| Author |
N1™ 3.05 SM, Camdriver for k790/k800/k810/k818 & N1™ 2.5 Final camdriver1 for /k800/k810. |
number1
Joined: Sep 12, 2007
Posts: > 500
From: UK,kent,Sittingbourne
PM |
are you sure you uploaded it to the correct place, tpa/preset/system/language , it works fine i know this because i'm using it. |
|
|
Domecot
Joined: Mar 25, 2008
Posts: 468
From: Macedonia
PM, WWW
|
it works fine on my k800i(R8BA024) aswell.no problems at all.Number1 you're the man |
mirrage24
Joined: May 07, 2008
Posts: 101
From: Philippines
PM |
i think 2.99.9SE2 gives better images |
jjokeris
Joined: Mar 08, 2008
Posts: 54
From: Athens-Greece
PM |
@ mirrage24
try sports mode 1 & 2 when daylight.I am using this one for over a month now and works fine.Noise is low and can control shutter speed.This means that you can make it brighter or darker not by setting the ISO (the reason for digital noise) but increasing or decr. shutter speed.ISO is locked at 100 & 200 (read info file) so in good light this is almost the lowest noise you can get.For mid light use mode 2.Remember that what you see on viewfinder is not what you get.Set it as you think that it is looks right and then lower 1 click or maybe 2 clicks for very bright days.I ve been trying a long time athese settings and they work fine.
K8001-R8BF003-cam No1 drv v3-disp drv No1 v2.5-My menu-font:Monotype Corsiva-Patch:Bat-rad-sig-bt-jav etc-techmode-bat mode...and still alive |
mimi14
Joined: Apr 12, 2008
Posts: 33
From: Nove Mesto nad Vahom, Slovakia
PM |
jjkores: pls can you give me some small manual to use shutter in Sport MEnu? For example when i turn down EV to -2 or up to 0 or higher. Thanks |
eddie2020
Joined: Apr 28, 2008
Posts: 331
PM |
guto.. u haven give me en lng in english web... i dont know russian... i only know english....
by the way... number 1... your mode drive me crazy... i hard to take nice picture because hard to remember... any formula to remember it easy?? every time i wan to take a picture i need re-read the note.. thats slow me down...
can i know best mode for..
1- OUTDOOR with bright ...
2-noon landscape
3.Normal light as in mall...
4.at night...
5. night landscape
6.poor light in room ... or bar etc
which mode is mostly we use??
[ This Message was edited by: eddie2020 on 2008-05-13 16:33 ] |
number1
Joined: Sep 12, 2007
Posts: > 500
From: UK,kent,Sittingbourne
PM |
the only difference between 2.99.9 SE2 and 3.0 is the exposure,you can achieve the same results as 2.99.9 by setting the EV to -0.3.
the modes are only extra options by selecting off you have the normal scenes and settings it is a advantage to use the correct modes but not necessary.
there is some logic to where the modes are placed
Mode 1 (solarize) is on most modes auto,portrait,landscape,Beach_snow,Document mode, the good light mode for shooting outdoor pics.
Mode 2 (Sepia) is on most modes auto,portrait,landscape,Document mode,Twilightlandscape, the night mode for very low-light pics.
negative, is always select effect with stick. |
eddie2020
Joined: Apr 28, 2008
Posts: 331
PM |
oh thanks...
we use mode 1 to capture good light...
mode 2 to poor light...
mode 3??? medium ? lol |
number1
Joined: Sep 12, 2007
Posts: > 500
From: UK,kent,Sittingbourne
PM |
On 2008-05-13 17:59:49, eddie2020 wrote:
oh thanks...
we use mode 1 to capture good light...
mode 2 to poor light...
mode 3??? medium ? lol
yea thats it's it it doesn't apply to some scenes, but it applys to the most commonly used scenes.
mode3 is indoor (medium) light only on auto & portrait, mode3 can also be vivid sharp mode or shutter speed piroty mode on most scenes. |
eddie2020
Joined: Apr 28, 2008
Posts: 331
PM |
ok i will remember this common use... ^^
1 good light
2 night
3 medium... vivid and speed prioty |
jjokeris
Joined: Mar 08, 2008
Posts: 54
From: Athens-Greece
PM |
@mimi14
mode1 solarise=ISO100
mode2 sepia=ISO200
ISO100 means less noise(less sensitivity).Shoot an object many times using mode1 and changing shutter with stick.If light conditions are good then you will see dif when you change shut.speed,from too dark pics to too bright pics.If light is not so good you won t see much dif,all will be more or less dark.Then you go to mode2,ISO200.This is more sensitive than 100 but more noisy.Maybe you won t notice it in some pictures because this is still low ISO . This will help with mid light pics.If u use mode2 and still pics are too dark the use a more sensitive mode.The lowest light there is the more ISO u need and of course the more dig noise there is.U can use portrait mode1.ISO is 400 so you have even brighter pics but noisy.You can "feel" it if u try some shots.
K8001-R8BF003-cam No1 drv v3-disp drv No1 v2.5-My menu-font:Monotype Corsiva-Patch:Bat-rad-sig-bt-jav etc-techmode-bat mode...and still alive |
agentreza
Joined: Jan 11, 2008
Posts: 52
PM |
Which 1 should be used as a general indoor mode?
Auto, portait with mode 3??? |
number1
Joined: Sep 12, 2007
Posts: > 500
From: UK,kent,Sittingbourne
PM |
yes Auto, portait with mode 3 and the indoor modes. |
whitehackker
Joined: Sep 01, 2007
Posts: 154
From: philippines
PM |
On 2008-05-13 13:39:31, number1 wrote:
are you sure you uploaded it to the correct place, tpa/preset/system/language , it works fine i know this because i'm using it.
ok i will try it again... anyway great cam driver lots of new modes... thanks |
rockygali
Joined: Nov 21, 2005
Posts: > 500
From:
PM, WWW
|
everyone is appreciating the work.. and yet no samples to feast on????
more samples.... *lol*
"Darkness is the absence of light.. and not the opposite..." |
|
|
Posted: 2008-05-13 13:39
