| Author |
p1i wont connect to seus or xs+ |
tonyitalian
Joined: Sep 02, 2004
Posts: > 500
From: Earth
PM |
hi everyone, today i tried to update my p1i using seus but wen it asks me to plug in the phone while pressing the "c" button, seus does not seem to recognize the phone and therefore does not tell me to continue or to release the "c" button......... the same thimg happened when i tried it with xs++, it gave the following error, pls help me anyone plsssssssss
15:01:03| XS++ v1.5 Ready !
15:01:37| Attempting to open the interface...
15:01:37|
15:01:37| Turn off phone
15:01:37| Hold C Button on phone and connect phone.
15:01:37| You have 30 seconds.
15:01:37|
15:02:09| Error: Cannot open phone communication port
15:02:17| Sorry, your phone is NOT SUPPORTED
15:02:17| +++ Sendinging shutdown signal to phone...
15:02:19| Shutting down...
15:02:30| XS++ v1.5 Ready !
15:02:46| Attempting to open the interface...
15:02:46|
15:02:46| Turn off phone
15:02:46| Hold C Button on phone and connect phone.
15:02:46| You have 30 seconds.
SE Rulez! |
|
|
gbrooks3
Joined: Jun 02, 2003
Posts: > 500
From: OTP RED CID36
PM, WWW
|
tonyitalian,
V1.5?
Check release notes, I dont see anything about using smartphones with it...
Use 3.1 Darwin.
Because the platform sends bogus messages while charging, that is why!!!..But why this change of heart?..We sense a charger connected, oops, we will not shut down after all!!!..*********************** UI BASIC, HOLD YOUR HORSES
|
tonyitalian
Joined: Sep 02, 2004
Posts: > 500
From: Earth
PM |
but why wudnt seus work????????
please help me anyone, i wana update my phone!
SE Rulez! |
AD
Joined: Aug 25, 2005
Posts: > 500
From: UK
PM |
Sounds like a driver issue to me, did you load the pc suite with it's symbian9 drivers? |
tonyitalian
Joined: Sep 02, 2004
Posts: > 500
From: Earth
PM |
i am not sure.... how do i do that?
SE Rulez! |
tonyitalian
Joined: Sep 02, 2004
Posts: > 500
From: Earth
PM |
anyone?????
SE Rulez! |
AD
Joined: Aug 25, 2005
Posts: > 500
From: UK
PM |
If you haven't installed the pc suite then your computer won't know what to do with your phone when you connect it.
You can download the suite here:
http://www.sonyericsson.com/c[....]twaredownloads/p1i?cc=gb&lc=en
Make sure that not even the usb cale it attached to your pc when you install it btw as this can cause problems...
once installed, SEUS etc. should work
[ This Message was edited by: AD on 2007-11-18 16:33 ] |
tonyitalian
Joined: Sep 02, 2004
Posts: > 500
From: Earth
PM |
On 2007-11-18 17:32:27, AD wrote:
If you haven't installed the pc suite then your computer won't know what to do with your phone when you connect it.
You can download the suite here:
http://www.sonyericsson.com/c[....]twaredownloads/p1i?cc=gb&lc=en
Make sure that not even the usb cale it attached to your pc when you install it btw as this can cause problems...
once installed, SEUS etc. should work
[ This Message was edited by: AD on 2007-11-18 16:33 ]
i have done this! but when seus asks me to press "C"and plug the usb in, the screen just stays there forever. it does not move on and does not tell me to release the "c" button either.
SE Rulez! |
Sluuz
Joined: Dec 17, 2007
Posts: 10
PM |
same problem here...
when seus asks to connect the USB cable while holding "C", the keypad of the phone flashes for a couple of times (on and off) and then it stays on. Backlight of the screen is also on. The phone is then only usable by removing the USB cable and pulling out the battery.
Reinstalled Phone Suite, used different computers, did a master reset, nothing works! |
gaming_guy
Joined: Oct 10, 2006
Posts: > 500
From: UK
PM |
[ This Message was edited by: gaming_guy on 2008-02-12 18:09 ] |
totalgsm
Joined: Jan 12, 2007
Posts: > 500
From: totalgsm.org
PM, WWW
|
Try their latest client referring to phone xs
|
Sluuz
Joined: Dec 17, 2007
Posts: 10
PM |
Sorry? I don't understand that |
jakontil
Joined: Jun 28, 2004
Posts: > 500
From: Changi, Chatswood, Cikarang
PM |
sorry bit off topic,
hi gaming_guy,
did u ever use XS++ 3.1 to change your W960 CDA? is it safe?
my last W960 was problematic, the touchscreen is way off from being accurate, just afraid if it was caused by a corrupted flashing, though SEUS updated successfully |
AD
Joined: Aug 25, 2005
Posts: > 500
From: UK
PM |
@sluuz
I think he/she means try getting the latest version of xs++, out of curiosity-can you use the pc suite to synch?
@jakontil
have you tried running the setup wizard?-it has a section to calibrate the touchscreen which doesn't appear on firstboot. Control Panel - Other.
[ This Message was edited by: AD on 2008-02-13 15:23 ] |
gaming_guy
Joined: Oct 10, 2006
Posts: > 500
From: UK
PM |
On 2008-02-13 14:04:42, jakontil wrote:
sorry bit off topic,
hi gaming_guy,
did u ever use XS++ 3.1 to change your W960 CDA? is it safe?
my last W960 was problematic, the touchscreen is way off from being accurate, just afraid if it was caused by a corrupted flashing, though SEUS updated successfully
i dont know why my avatar is a w960i, but i have a k810 and k800 so cant tell you about that.
however if you follow the instructions correctly and back up your gdfs before you start, you should be fine
K700i > K750i > K810i (current phone)
|
|
|
Posted: 2007-11-16 21:57
