| Author |
K800 won't go on |
WuZi
Joined: Sep 22, 2007
Posts: 5
PM |
I was listening to some music on my K800 and 2seconds afterwards I pulled my battery out with proper turning it off.
Next thing I wanted to put my battery back on, nothing happens? No vibration nor white screen.
My battery was still half full btw.
Now can somebody please explain me what happened ? :S
And it's not getting detected my computer ? :s
please help me
[ This Message was edited by: WuZi on 2007-09-22 17:45 ] |
|
|
BobaFett
Joined: Jan 06, 2004
Posts: > 500
From: Kamino (wish it would be Lund)
PM, WWW
|
when u put it on charger, does it charge?
This message was posted from a E60-1 |
WuZi
Joined: Sep 22, 2007
Posts: 5
PM |
no it doesnt charge but every time when I put something in the charge port of my k800, the red led in the infrared-port twinkles a few times in it
[ This Message was edited by: WuZi on 2007-09-22 19:36 ] |
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
It seems to be problem with the EROM. Older eroms have similar bug on K800s. Try flashing your EROM with Wotanserver for free and then flash your firmware with newest one (R1KG001) using XS++. THen the phone should be fine.
|
BobaFett
Joined: Jan 06, 2004
Posts: > 500
From: Kamino (wish it would be Lund)
PM, WWW
|
but if u have no experiences with flashing, let it done by an expert in a mobile shop. btw totalmultiserver could repare it too
This message was posted from a E60-1 |
Alexandra
Joined: Jun 13, 2007
Posts: > 500
From: Nowhere Mobile: K800
PM, WWW
|
I'd prefer it if you did it the FREE way, which is via XS++.
[addsig] |
WuZi
Joined: Sep 22, 2007
Posts: 5
PM |
thx for the threatments but first of all the phone isnt being detected anymore on the computer :S ? |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
then you need to take it to the nearest service center in your area.
|
phil_GT
Joined: Sep 15, 2007
Posts: 19
PM |
have you put the battery in the right way lol
could try removing it to see the condition of the battery connecting pins if there bent n not touching try to straighten them out |
WuZi
Joined: Sep 22, 2007
Posts: 5
PM |
the pins are okay
i don't have warrenty actually what do I do now :'( ?
[ This Message was edited by: WuZi on 2007-09-24 17:10 ] |
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
Did you try removing the battery for a while and trying again?
|
opexblue
Joined: Jan 18, 2006
Posts: 226
From: Manado, North Celebes, INA.
PM |
If it is firmware problem, your comp won't detect your phone. Use xs++,press & hold C button while connecting the phone to comp.xs++ will detect the phone. IMO
This message was posted from a K800i |
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
@opexblue - not everytime the PC recognizes DEAD PHONES...  . In fortunately he might be "lucky" to get his phone recognized and repaired. But even if it is recognized from XS++, flashing it won't make any difference if the EROM is damaged... Damaged EROM can be repaired from free using DCU60 cable only with Wotan (as far as I'm informed)... For flashing EROM with some other software you will need service cable...
|
opexblue
Joined: Jan 18, 2006
Posts: 226
From: Manado, North Celebes, INA.
PM |
I see. So there's only two choices. Flash with wotan or go to the Service center..
Thanks for the info...
[ This Message was edited by: opexblue on 2007-09-25 16:30 ] |
WuZi
Joined: Sep 22, 2007
Posts: 5
PM |
thnx gonna see what they ll say at the service center |
|
|
Posted: 2007-09-22 18:40
Sony Ericsson software/hardware support! 
