Esato

Forum > Sony Ericsson / Sony > Technical > Returning K750i from W800i firmware

Author Returning K750i from W800i firmware
trashbat
T68 gold
Joined: Aug 05, 2007
Posts: 7
PM
Posted: 2007-09-18 15:37
Reply with quoteEdit/Delete This PostPrint this post
Hi,

My last K750i fell to bits so I've replaced it with a second hand one, but this has been upgraded to W800i firmware.

I miss a few minor things like the activity menu. It also appears Bluetooth doesn't work - it can't find anything at all. I don't know if this is related but wonder if it might be e.g. MAC address or something.

I'm told I can downgrade again via DaVinci - is this true? Will this then let me use the SE Update Service or am I now permanently locked out of that with this handset?

Cheers,

Rob
strizlow800
G900 Brown
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM
Posted: 2007-09-18 16:00
Reply with quoteEdit/Delete This PostPrint this post
You can downgrade throught SEUS or using XS++ to flash your phone if it is CID49. If it is CID36 you can use FAR Manager to flash your phone back with K750 firmware.
Sony Ericsson software/hardware support!

Phone Flashing Tutorial (DB2020 CID49/51/52)
trashbat
T68 gold
Joined: Aug 05, 2007
Posts: 7
PM
Posted: 2007-09-19 22:51
Reply with quoteEdit/Delete This PostPrint this post
Thanks.

In return here's what I found out:

* It was classed as brown in DaVinci
* I used FAR to turn it back to red
* I used DaVinci to turn it back to a K750i
* I can now use SEUS again
* Bluetooth wasn't working because it was missing the aerial

The last point was quite surprising, to me anyway. I noticed right at the end - there is a small piece of metal wire partly embedded in the plastic case next to the camera button. This is the Bluetooth aerial. If you don't have one or it isn't connected properly, Bluetooth will work but not find anything.
tranced
LG Nexus 4
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM
Posted: 2007-09-19 23:18
Reply with quoteEdit/Delete This PostPrint this post
@trashbat: can we have a pic of the bt piece?
I jay0726 | (+3, 0) | Clara, Evita, Mimmi & Victoria | My Pics | Do your job!
trashbat
T68 gold
Joined: Aug 05, 2007
Posts: 7
PM
Posted: 2007-09-19 23:30
Reply with quoteEdit/Delete This PostPrint this post


This is the backplate of the phone. I'm holding on to the camera connector. Next to that, with the two large contacts, is the vibrate motor.

To the immediate right of those contacts is a plastic wall, then you can just make out another couple of wire contacts. This bit of wire runs right, up until the wall before the camera button. That's the BT aerial.

Out of the phone it's a bit more substantial:



Hope that helps.
tranced
LG Nexus 4
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM
Posted: 2007-09-19 23:41
Reply with quoteEdit/Delete This PostPrint this post
thanks for the explanation. i've never seen the bt aerial before.
I jay0726 | (+3, 0) | Clara, Evita, Mimmi & Victoria | My Pics | Do your job!
strizlow800
G900 Brown
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM
Posted: 2007-09-20 09:55
Reply with quoteEdit/Delete This PostPrint this post
That IS the bluetooth aerial. Just check if it is connected to the mainboard good. It will work then .
Sony Ericsson software/hardware support!

Phone Flashing Tutorial (DB2020 CID49/51/52)
trashbat
T68 gold
Joined: Aug 05, 2007
Posts: 7
PM
Posted: 2007-09-20 11:29
Reply with quoteEdit/Delete This PostPrint this post
Yeah, I know - it was missing completely in the latest phone I bought. The one in the pics is from my broken K750i, so I just moved it over & all is good.
strizlow800
G900 Brown
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM
Posted: 2007-09-24 22:18
Reply with quoteEdit/Delete This PostPrint this post
Hehe, nice to know you solved your problem .
Sony Ericsson software/hardware support!

Phone Flashing Tutorial (DB2020 CID49/51/52)
Access the forum with a mobile phone via esato.mobi