| Author |
w810i audio/camera drivers |
dshiu
Joined: Sep 17, 2007
Posts: 2
PM |
hi all im new here
i just installed audio and camera drivers for my w810i cid 50 red .. but i dont notice any difference between before and after installation... i wondered if i did it correctly or no...
audio: tvh mix v6 directory: c:/tvh_acoustic.zip/ifs/settings/acoustic
camera: sarmad 5.8 directory: c:/sarmad.zip/ifs/settings/camera
then i put those 2 in misc area and flashed it (separately)
this is the log
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
Speed:921600
OTP LOCKED:1 CID:50 PAF:1 IMEI:35657301633176 CERT:RED
LDR:060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Processing script...
Will execute script now.
Phone detached
Elapsed:37 secs.
after everythings done i went to check the camera driver version by pressing >*<<*<* Service Info then Software Info, went down to camera driver and it says
Camera SW versions
Camera
Current: 4.5
which is the original driver... and not the sarmad 5.8
my w810i is CID50, red, unbranded, R4EA031
if the camera driver was not installed.. then i dont think the audio driver was installed too =(
any help?
thanks |
|
|
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
Well, sarmad's driver is not a simple driver. Give a look at the super cameradriver thread at the software forum.
|
dshiu
Joined: Sep 17, 2007
Posts: 2
PM |
mind explainin wat you mean by sarmad driver not being a simple driver? cuz everythings the same.. ifs/settings/camera/camdriver0.dat
i used the 7.7final camera driver on my old w810i cid49 (was stolen, so i bought a new w810i and its cid50), and i loved that driver.. if i install that driver on my cid50 will it work?
also, w810i users which camera driver would you recommend?
|
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
Well, you seem to not have installed the driver correctly. I misread your post. Well, i mean, that driver is not common. This has another functions such as scenes, etc.
|
sunils120
Joined: Nov 08, 2006
Posts: 480
From: India
PM |
the old CID49 cam driver of ur  810i may not work for this one!
Get the original cam drivers for ur CID 50 ...
If u ask me, I liked the Raiderski 6.5. 
_________________
i love my  k700i and 810i
[ This Message was edited by: sunils120 on 2007-09-17 08:57 ] |
manandesai
Joined: Oct 20, 2007
Posts: 1
PM |
well there are lots of modified drivers are available so dont be confuse.
i have tried Kreomag v21.9 and i bet nothing better than this one.
i have W810i with slight yellow display and i thought cam should not be the same but when i found this problem so for while i was crying but compromise is there. so when i change the old cam driver and put new one which is Kreomag v21.9 after that cam goes superb. i can see the major difference between old cam driver n new one.
yes one more thing after flashing the new driver zoom facility will work but lil bit odd whenever you zoom ur cam it wont zoom actually but it is zooming you wont find the reason why its not zooming.
whenever you are going take snap just remember one thing as follows:
1. start the camera.
2. zoom it.
3. then press half button of camera so it will be zoom.
4. dont move ur cam till it'll show you the picture. |
Xen0nflash
Joined: Jun 09, 2006
Posts: 475
PM |
I dont think the camera version will change name to sarmad 5.8
|
Zuko
Joined: Dec 25, 2007
Posts: 68
PM |
it will change to 5.8 |
|
|
Posted: 2007-09-17 01:39
jay0726 | 
