| Author |
w810i wont power up when the camera ribbon is connected |
Holdit
Joined: Apr 07, 2006
Posts: 148
PM, WWW
|
Just as the title explains...
Got a w810i that at 1st suffered from massive software issues. Then once flashed and resolved, the phone wouldnt power up...It would only respond to a cruiser cable. I took the phone apart and unplugged each ribbon and tested to see if the phone would come on....When the camera ribbon was either disconnected form the board or the camera box itself, the phone would power on...The phone would even power on if the ribbon was still connected to the board, jus not when a circuit was made.....
Hmm, somethings breaking the connection the power up route somewhere was my 1st thought
Soooo, I unplug the camera ribbon , power up the phone then plug the camera ribbon back in and the phone stays on and the camera works...However, when the phone is turned off, it wont switch back on with the camera ribbon plugged in...
What the hell is going on here?!?! | |
|
Sammy_boy
Joined: Mar 31, 2004
Posts: > 500
From: Staffordshire, United Kingdom
PM, WWW
|
Could possibly need a new camera ribbon, though not heard of this problem before!
"All it takes for evil to flourish is for good men to do nothing" - Edmund Burke
|
A L 3 X
Joined: Dec 20, 2006
Posts: > 500
From: Yorkshire Phone: iPhone 3G
PM |
if it works wth ribbon connected to board but nnot cam, could also nee a new cam block :S
|
Holdit
Joined: Apr 07, 2006
Posts: 148
PM, WWW
|
Cant be - Phones on now and cam is perfetly working - Just if I turn the phone off, it wont power on without disconnecting the ribbon from the board first -
Btw, I have swapped both the ribbon and cam block during my troublshoot - Seems something else... | |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2007-06-03 00:52
