| Author |
DB2010 cid49 with Far + SEFP, Tested with k750 |
3ricK
Joined: Dec 21, 2006
Posts: 42
PM |
Install the USB FLASH Drivers!
Read the Tuto !!
Iīll update the topic , CID 49 brown phones and all EROM now supported! |
|
|
3ricK
Joined: Dec 21, 2006
Posts: 42
PM |
Ok.. Topic Updated!!
Now Brown phones have loaders for them and all EROMīs supported thanks to v3.3 of den_po !!
Still didnīt tested new files but should work the same way with previously one! Just pay attention in executing the file sefp0.10.0.51patch.exe which is the new Patch for SEFP plugin that will allow all EROMīs to work properly with Far manager!
Any doubts just scream!
|
getz
Joined: Jan 05, 2007
Posts: 3
PM |
can you please upload db2010cid49_3_3.rar somewhere else? se-nse is in maintenance.
thank you |
jairo28
Joined: Mar 22, 2006
Posts: 153
From: Dominican Republic
PM |
@Erick: Hi, I want de drivers link plz. |
3ricK
Joined: Dec 21, 2006
Posts: 42
PM |
Post Updated with mirrors for newer version! |
tofa
Joined: Jan 17, 2007
Posts: 1
PM |
I followed the steps and when i went to flash the phone back to its starting firmware (through FAR) it connects to my phone but when i go to the FLASH folder it gives me the error 'script flash_mode execution error'
My phone will not work until i have flashed it back to its original firmware and i cant due to this problem !!
Any help aprecciated
thanks |
2145
Joined: Jan 17, 2007
Posts: 5
PM |
Will this debrand my phone? Thanks in advance. |
3ricK
Joined: Dec 21, 2006
Posts: 42
PM |
@tofa:
Are you sure you have flashed the right ssw file first before connecting Far!?!?
And also choose the right Script in the begging of FAR?!
|
2145
Joined: Jan 17, 2007
Posts: 5
PM |
Ok, my phone is DEAD. I followed the instructions and repeated the process several times, but I can't get a response from my phone. The model is K750i (with R1DB001). I even tried to install an older firmware (R1CA021) in the last step with FAR, but SEUS still says my phone is up to date (?). I've tried everything, but I can't get my phone to start (or charge). Please help me as soon as possible because I really need my phone. XS++ doesn't have that bug where it stops, and FAR only takes 2 seconds to copy the FW (while, at your example, it takes 17 seconds). I hope you can help me soon. |
Chaosin1983!
Joined: Aug 25, 2006
Posts: 2
PM |
How would I go on changing my k750 software to a w800 using this method? |
MarkJason
Joined: Dec 03, 2005
Posts: 194
From: Bacolod City, Philippines 6100
PM |
Ok, my phone is DEAD. I followed the instructions and repeated the process several times, but I can't get a response from my phone. The model is K750i (with R1DB001). I even tried to install an older firmware (R1CA021) in the last step with FAR, but SEUS still says my phone is up to date (?). I've tried everything, but I can't get my phone to start (or charge). Please help me as soon as possible because I really need my phone. XS++ doesn't have that bug where it stops, and FAR only takes 2 seconds to copy the FW (while, at your example, it takes 17 seconds). I hope you can help me soon.
Read this thread and you will find the answer... I have the same problem as yours and from the other poster... I gave a link that will restore your phone... |
2145
Joined: Jan 17, 2007
Posts: 5
PM |
As far as I know, that procedure is for a different firmware and it requires a cruiser cable, which i don't have. I think the problem is that FAR doesn't actually flash the fw back, because there is no warning and the procedure is finished too fast. |
3ricK
Joined: Dec 21, 2006
Posts: 42
PM |
2145
You must have done something wrong !!
The 17 second thing doensīt mean much! The last time i changed stuff it took like 3 seconds! Also i tried on my brothers phone , his firmware is R1CA2100 and the Warning Pop up didnīt showed up too! !
Have you unpluged your battery between the process?!?!
Are you sure you have flashed with the right REST file?!?!
If you fave flashed a wrong firmware REST file the phone wont work anymore and you will have to do a full flash , just like a guy did here on the page 4 i think! |
3ricK
Joined: Dec 21, 2006
Posts: 42
PM |
2145
You must have done something wrong !!
The 17 second thing doensīt mean much! The last time i changed stuff it took like 3 seconds! Also i tried on my brothers phone , his firmware is R1CA2100 and the Warning Pop up didnīt showed up too! !
Have you unpluged your battery between the process?!?!
Are you sure you have flashed with the right REST file?!?!
If you fave flashed a wrong firmware REST file the phone wont work anymore and you will have to do a full flash , just like a guy did here on the page 4 i think! |
kahmeelo
Joined: Mar 01, 2006
Posts: 247
From: Jamaica W.I.
PM |
Quote:
|
On 2007-01-17 00:22:33, tofa wrote:
I followed the steps and when i went to flash the phone back to its starting firmware (through FAR) it connects to my phone but when i go to the FLASH folder it gives me the error 'script flash_mode execution error'
thanks
|
|
I get the same error. I try with k310 and k750 and get the same error
_________________
I had  Nokia 3320, Nokia 3410,  Sony Ericsson T68i, Sony Ericsson T230. Now I have [b]Sony Ericsson K310  .[b] My next will be a k550 or k800
_____________________
Kahmeelo Ur Jamaican Boy
[ This Message was edited by: kahmeelo on 2007-02-22 18:11 ] |
|
|
Posted: 2007-01-12 17:45
