Author |
DB2010 cid49 with Far + SEFP, Tested with k750 |
Magicnet2 Joined: Nov 13, 2006 Posts: 59 From: Slovakia PM |
Well, thats weird. In the Far, when you flashed the restore firmware, tha last thing, Did it go well? I mean, did it finish that final flash. Because, if it finished that last flash, it should work ok. My problems were a bit different. Mine died before being able to get detected by Far. But when I tried again flash with XS++ and tried again it went ok. Far found him, at the end flashed the rest... and everything was ok. Are you sure, you used the right firmware file? Or couldnt it be, that you dont have the right plugin for the new firmware? Well here I cant help. Try asking gxg, maybe he will be able to help.
Just a little suggestion: did you try to hold the power button after that a little bit longer? Because mine normally turns on after a very short while, but after a flash, it takes qiute longer to turn him on. Like maybe a good 8 - 10 seconds. And you probably did take out the battery after the flash out for a while, did you... |
|
roelnino Joined: Mar 05, 2007 Posts: 3 PM |
After i flash it with the k750i R1CA021 rest file,it says to take out battery of your phone,w8 20s then start phone.I didn't try to do your way but i will try,for now i don't want to risk anymore damaging my phone..btw i moded my menu with alien icons..and then patched with SE oficial patcher and phone starts with this menu:
Only one thing bothers me; what kind of files SE oficial patcher use!!
Here is where i think the files needed to flash my phone are situated:
LINK:C:\\Program Files\\Sony Ericsson\\Update Service\\db\\13740270\\blob_fs
but could not find any familiar files...only this type:
FILE_57015666_1140764267000_1140764268000_57015665_111841_INFILE_LONGTERM
there are quite the same!! but this:
!!!!!NO EXTENSION!!!!
FILE_100078641_1145958318000_1145958373000_100077914_18486404_INFILE_LONGTERM
SIZE=10MB ...i think this could be what the patcher writes ? cause rest of them are smaller then 400kb>1byte
If someone can help me with this, to find what what file write to the phone,then i can help u with advices
|
smsumit Joined: Mar 09, 2007 Posts: 6 PM |
HELP ... after editing my files when i close FAR manager and start again .. press C button while pluggin in the phone, it ses FATAL ERROR CODE 0, CID ERROR
I CANT TURN MY PHONE ON |
smsumit Joined: Mar 09, 2007 Posts: 6 PM |
Ok .. it worked, changed the cam driver to zuza3 ... changed sms limit storage by changin /smsdata to /tpa
Questions --> is zuza3 best ? tho it has zoom, but in one forum, i found they said it uses 4.3 cam driver ... and i cant actually find any significant difference in picture quality ...
question 2--> for sms limit, i only changed the pref.txt files /smsdata to /tpa .. i didnt create any folder structure, some site mentioned that i should also create folder structure while some site didnt mention nything about this .. so, will i face ne problem without folder structures ??? |
tranced Joined: Jan 19, 2006 Posts: > 500 From: Santo Domingo, wonDeRland PM |
On 2007-03-09 15:25:37, smsumit wrote:
Questions --> is zuza3 best ? tho it has zoom, but in one forum, i found they said it uses 4.3 cam driver ... and i cant actually find any significant difference in picture quality ...
Hybrid Camera Driver for W800i/K750 part 2
|
in4matics Joined: Mar 21, 2007 Posts: 1 PM |
Hello,
I follow the instructions but when I arrived this step:
-------------------------
After editing all the Stuff you want you must shutdown the CSFSLoader , just keep pressing .. until is asks you if you want to quit and press Yes !
Close FAR and unplug phone!!
Open FAR again and make same procedure to connect your phone !
Now Click On FLASH .
-------------------------
The FarManager said: "script flash_mode execution error"!
Please help me.. what's the problem ??? |
pram_zx Joined: Mar 02, 2007 Posts: 161 From: NoWhere Island PM |
@ 3Rick
Hi...can you upload this "db2010cid49brown.rar.zip" again on www.rogepost.com please...Thanx |
syprus21 Joined: Mar 24, 2007 Posts: 3 PM |
help me pls!!!!!!!!!
i do the procedure on [page 1] and unfurtuntly my phone dead! and when i tried to connect my phone on FAR doing the procedure listed on same page, a error massage appear "fatal error reading cid" error #0.
pls help me! what should i do to return back my phone system working...ohh pls! you could e-mail me here syprus_hills2000@yahoo.com
thanks in advance i do really appreciate your help and advice guys! |
wchurchil81 Joined: Mar 24, 2007 Posts: 4 PM |
On 2007-03-24 15:33:06, syprus21 wrote:
help me pls!!!!!!!!!
i do the procedure on [page 1] and unfurtuntly my phone dead! and when i tried to connect my phone on FAR doing the procedure listed on same page, a error massage appear "fatal error reading cid" error #0.
pls help me! what should i do to return back my phone system working...ohh pls! you could e-mail me here syprus_hills2000@yahoo.com
thanks in advance i do really appreciate your help and advice guys!
hello all,
im new here so as my phone..i have same problem with mark in early post..a dead phone after using XS++. I followed exactly even to remove the battery. FarManager cant detect my phone, something like awaiting response..try to remove battery again,still the same..a dead phone..
I try to use XS++ to detect it again,it worked but not FarManager..now i am flashing it back using REST file(am i doing the rite thing to recover)??
other forum did teach how to recover a dead phone but it using cruiser not XS++...please help me, i just want to upgrade camera driver..
email me chilskater!yaho.com
msn wchurchil81
ym chilskater..
thanks |
tranced Joined: Jan 19, 2006 Posts: > 500 From: Santo Domingo, wonDeRland PM |
try to upgrade via SEUS
|
wchurchil81 Joined: Mar 24, 2007 Posts: 4 PM |
On 2007-03-21 21:52:23, in4matics wrote:
Hello,
I follow the instructions but when I arrived this step:
-------------------------
After editing all the Stuff you want you must shutdown the CSFSLoader , just keep pressing .. until is asks you if you want to quit and press Yes !
Close FAR and unplug phone!!
Open FAR again and make same procedure to connect your phone !
Now Click On FLASH .
-------------------------
The FarManager said: "script flash_mode execution error"!
Please help me.. what's the problem ???
|
wchurchil81 Joined: Mar 24, 2007 Posts: 4 PM |
On 2007-03-21 21:52:23, in4matics wrote:
Hello,
I follow the instructions but when I arrived this step:
-------------------------
After editing all the Stuff you want you must shutdown the CSFSLoader , just keep pressing .. until is asks you if you want to quit and press Yes !
Close FAR and unplug phone!!
Open FAR again and make same procedure to connect your phone !
Now Click On FLASH .
-------------------------
The FarManager said: "script flash_mode execution error"!
Please help me.. what's the problem ???
I uninstall FarManager and restart my PC. The FarManager can detect my phone now..but when i click FLASH i got these message:
**ALL LOADERS TAKEN FROM SETOOL2**
Sending QH_ldr:db2010_CID00_R2F_id.ldr: header...sent 896 bytes
Sending QH_ldr:db2010_CID00_R2F_id.ldr: prologue...sent 5896 bytes
It completes 100% then i got error message
Script flash_mode execution error!
Error Code:0
What does it means?Please help me |
wchurchil81 Joined: Mar 24, 2007 Posts: 4 PM |
i just reupdate my hset with SEUS tools and it worked but i still cant figure out wat's wrong before..i wanted to update my camera driver.. |
syprus21 Joined: Mar 24, 2007 Posts: 3 PM |
i,ve solved my problem spending 4 hrs using SEUS for my dead k750! i got new fw R1dbOO1 and i red about this new fw complaining that works bad on media player, but on mine it was better than my prev fw R1CA021..but i still want to change my cam driver but since FAR does not work with CID 49 what should i do? |
tranced Joined: Jan 19, 2006 Posts: > 500 From: Santo Domingo, wonDeRland PM |
@syprus: in what way your media player's been improved?
|
|