Author |
Hybrid Camera Driver for W800i/K750 |
jleosza Joined: Jun 15, 2006 Posts: 128 From: Belo Horizonte, Brazil PM |
check this pics they all got a bit of noise even with some sunlight, i think its because of sharpness 5 in version 2.1 that didint happen so much in version 1.52.
i dont know how to put these pictures to apper 1632x1224 in essato forums....so you wont be able to see a lot of noise.......
|
|
daremo Joined: May 05, 2006 Posts: 60 From: St.Lucia PM, WWW
|
just wondering how far that the hybrid could go, in terms of iso would it be possible to push it up to 800 or 1000 iso, i've tried the low light one askd did and it was quite good for me, but that got me thinking that maybe it might be able to be pushed up a bit more.I know that the aperture of the k750i is quite small so maybe that might be problematic, still however the work being done presently with the cam driver is still quite amazing and would love to say thanks to all those ppl involved in it. cheers |
jleosza Joined: Jun 15, 2006 Posts: 128 From: Belo Horizonte, Brazil PM |
i dont know if its gest me but im having some camera crashes with version 2.1..... i also noticed that the camera crash cames right after my modified walkman player skin comes back to the original skin, can that be a problem of the walkman skin? should i backup the walkman skin or are some of you also suffering camera crash? |
max_wedge Joined: Aug 29, 2004 Posts: > 500 From: Australia PM, WWW
|
yep, I get similar sort of problems. I guess K750 just doesn't have the graphics capabilities to support camera and two skins (remember the walkman one is still loaded into memory - with the new skin "over the top" so to speak.
|
jleosza Joined: Jun 15, 2006 Posts: 128 From: Belo Horizonte, Brazil PM |
Quote:
|
On 2006-07-04 01:17:21, max_wedge wrote:
yep, I get similar sort of problems. I guess K750 just doesn't have the graphics capabilities to support camera and two skins (remember the walkman one is still loaded into memory - with the new skin "over the top" so to speak.
|
|
no but my problem isnt with k750 is with w800 i changed the original walkman skin to the first one that appears in this page http://forums.se-nse.net/inde[....]9bd9a906&showtopic=3876&st=120
and now the skin and the camera crashes at the same time, when the walkman skin gets back to the original one the camera crashes, so max_wedge do you think i should backup the walkman skin and leave only the hybrid camera v2.1?
thanks by the fast answer =) |
max_wedge Joined: Aug 29, 2004 Posts: > 500 From: Australia PM, WWW
|
dude, I mean the K750 hardware (including W800 which is identical in all respects with regard to the hardware) is not capable to run all that. On either a K750 OR a W800.
I suggest try the standard cam driver with the skins. If that works okay then stick with stock cam driver. However I did find that my camera crashed even when using a stock driver with compression mod only. The only time my cam doesn't crash in relation to the media player seems to be when I'm using a completely stock driver - the decrease in compression is plus loading skins is too much for my poor old K750 (with W800 software)
If you don't want to use stock cma driver you might have to ditch the skins.
|
IRFCA_WDG-3A Joined: Nov 24, 2005 Posts: 359 From: Rajdhani Express!! PM |
Quote:
|
just wondering how far that the hybrid could go, in terms of iso would it be possible to push it up to 800 or 1000 iso, i've tried the low light one askd did and it was quite good for me, but that got me thinking that maybe it might be able to be pushed up a bit more.
|
|
Higher ISO is not an advantage, mate - the higher the ISO, the more noise you get. Always try to keep ISO as low as possible for the best photos. The only situation where high ISO is handy is night action, where "capturing the scene" is more important than "quality of the picture"
|
rockygali Joined: Nov 21, 2005 Posts: > 500 From: PM, WWW
|
another white balance handling from ver 2.1
this one focused on the pillar... adjusting the white balance. (Auto)
this one focused on the flooring... adjusting the white balance (Daylight)
and still.. i like the results... when you put these shots in prints.. theyre remarkable. no noise on the dark areas.
"Darkness is the absence of light.. and not the opposite..." |
coolfriend07 Joined: Aug 29, 2005 Posts: 34 PM |
Quote:
|
Higher ISO is not an advantage, mate - the higher the ISO, the more noise you get. Always try to keep ISO as low as possible for the best photos. The only situation where high ISO is handy is night action, where "capturing the scene" is more important than "quality of the picture"
|
|
Agreed.
@ aksd
Is is possible to lower ISO in k750/w800 to 80 instead of minimum 100 ? Note that iso on k800 is minimum 80, imo.
[ This Message was edited by: coolfriend07 on 2006-07-04 08:10 ]
[ This Message was edited by: coolfriend07 on 2006-07-04 12:31 ] |
IRFCA_WDG-3A Joined: Nov 24, 2005 Posts: 359 From: Rajdhani Express!! PM |
ISO 800 minimum? LOL, that must be 80 mate - i can't imagine the amount of noise that'll result from an ISO 800 image
|
coolfriend07 Joined: Aug 29, 2005 Posts: 34 PM |
I mean 80. that was typing error.
btw point was to lower k750 ISO at par with k800.
thanks |
jleosza Joined: Jun 15, 2006 Posts: 128 From: Belo Horizonte, Brazil PM |
video capture with v 2.1 its gest amazing now..... it looks like 20 frames p/s on the pc =) thanks aksd
[ This Message was edited by: jleosza on 2006-07-05 01:28 ] |
daremo Joined: May 05, 2006 Posts: 60 From: St.Lucia PM, WWW
|
yeah, am aware of the high iso noise problem, but am using it for night photography,hence the reason I queried about it.thanks |
AJ_SaKa Joined: Feb 02, 2006 Posts: 3 PM |
@aksd
will you Please put the newest link for hybrid camera driver on the first post and perhaps the history on it.
thanks a much
|
QuickShare Joined: May 06, 2006 Posts: > 500 From: MYR PM |
well, which camdriver / version that are deserved to stick on to our phone camera? im tired of reading already |
|