| Author |
W800i Voice Tag Recording Via Bluetooth Head set |
tmp
Joined: Nov 16, 2002
Posts: 7
From: Bristol,UK
PM, WWW
|
Ok I give up how do you record a voice tag that will work with the 608 bluetooth head set.
|
|
|
Gud
Joined: May 21, 2002
Posts: 207
From: Sweden
PM |
Record it in the phone, not the headset. Thats how had to do when recording voice tags with my 662.
|
tmp
Joined: Nov 16, 2002
Posts: 7
From: Bristol,UK
PM, WWW
|
Have done that but when I press the button on the headset it fails to match.
|
Gud
Joined: May 21, 2002
Posts: 207
From: Sweden
PM |
Is voice dialling active..? It sounds simple but I forgot to activate that after reflashing my phone -> thought the newly flashed firmware had BT-bugs...
|
tmp
Joined: Nov 16, 2002
Posts: 7
From: Bristol,UK
PM, WWW
|
its on in the menu but testing with my wired head set get the same thing.... ?
|
englishmanabroad
Joined: Aug 14, 2002
Posts: 163
From: UK
PM |
not sure it will help with your model BT but here's a post that I (and others) sent ages ago... should be similar..
Another thought - the Sony Ericsson site is pretty cool for FAQ - have a look at the following for the 65 - or go to the support section
How do I activate voice commands with my HBH-30/35/60/65 and R520?
Make sure you have paired the devices. (If not, see the manuals.)
To improve your hit-rate when using voice-dialling, record all the voice labels through the HBH-30/35/60/65 and make sure the headset and the phone are within range of each other.
Phone settings must be made before you add voice commands. Please follow the instructions below.
Note: Phone numbers must be saved correctly, with your home number under HOME, etc.
1. Select SETTINGS, press “Yes”.
2. Scroll to VOICE CONTROL, press “Yes”.
3. VOICE SETTINGS, press “Yes”.
4. Scroll to VOICE DIALING, press “Yes”.
5. Select ON, press “Yes”.
6. Follow the instructions on the phone.
7. Choose the number type(s) you want to use (Home, Work, Mobile, Other), press “Yes”. Immediately press the call-handling button on the HBH-30/35/60/65. Speak after the higher tone beep.
8. Press the NO key to exit.
Now you need to add a voice command to a name(s) in the phonebook.
1. Enter the PHONEBOOK.
2. Scroll to EDIT CONTACT, press “Yes”.
3. Find the name whose phone number you want add voice command to.
4. Scroll to EDIT VOICE, press “Yes”
5. ADD VOICE COMMAND, press “Yes”
6. Follow the instructions on the phone, press “Yes”. Immediately press the call-handling button on the HBH-30/35/60/65. Speak after the higher tone beep.
7. You have now added a voice command
***********************************
worked fine for me
|
Gud
Joined: May 21, 2002
Posts: 207
From: Sweden
PM |
Try to re-record the voice tags or adjust your timing when saying the recorded voice tags.
|
|
|
Posted: 2005-08-21 12:24
