| Author |
1.3.2.7 drivers for dongles / MORE audio howtos on 1st page |
sojakim
Joined: Feb 13, 2003
Posts: 10
PM |
SemiDeus
As far as I know XNTD does NOT work with Outlook EXPRESS but only with Outlook (comes with MS Office).
cya
Sojakim |
|
|
SEMIDEUS
Joined: Feb 20, 2003
Posts: 9
PM |
|
Calvin c",)
Joined: Oct 29, 2002
Posts: 108
From: neverland
PM, WWW
|
@c0mm0n, I'll be waiting for the instruction. Take your time buddy.  |
SEMIDEUS
Joined: Feb 20, 2003
Posts: 9
PM |
SOrry, I meant Microsoft Outlook (not the Express one...) |
nippit
Joined: Aug 18, 2002
Posts: 36
From: Singapore
PM |
Billionton BT dongle
T68i
ipaq 5450
Notebook XP pro Sp1
When I install the v1.3.2.7 from the bilionton site (this is looks like the full set of Widcomm BTW even has the BT stack monitor/debugger) install works perfect same goes to bluetooth. BUT BUT my whole DNS system dies off.
I do not have problem with pairing etc BUT
After I install this version (no older Bt software is installed on this machine) I get a warning from my Mcafee (virus scanner) indicating that my ipstack has been updated or replaced. Not a very worrying message as Bluetooth will introduce a new ip stack.
After this everything other than resolving names trough DNS works. So I can ping or open a web page as long as I type the ip instead of the name.
Uninstalling the BT does not cure the problem too. Luckily I got my XP restored to a safe point. I have tried more than once same result each time.
Strange! Has any body encountered such problem? Any Suggestions
There are few more around having problems with XP but seems different
nippit |
onionz
Joined: Feb 21, 2003
Posts: 24
From: London, UK
PM |
Yes!!! My whole network setup in XP goes bananas if i install the TDK dongle. I thought it was something to do with my particular setup, but i never really considered the possibility that my IP stack has been replaced (it quite likely has been even now, with the bluetooth dongle not installed).
I think i might try doing a reinstallation of XP over the top of my current installation. My network setup seems so fragile, and my mcafee virusscan hasn't done an auto update in 40 days..just doesn't work. |
c0mm0n
Joined: Jan 14, 2003
Posts: 216
From: Paris, France
PM |
@onionz, nippit
Mcaffee/XP/bluetooth conflict ???
@calvin
1st tests have been made, actually works great, i keep on working this out to write a clean and hopefully efficient howto |
nippit
Joined: Aug 18, 2002
Posts: 36
From: Singapore
PM |
@ c0mm0n
Conflict although I would not rule this out it is very unlikely.
Because mcafee does not really interfere with the ip stack but who knows.
The only thing for sure is DNS system goes off. DNS is very high level in the IP stack.
When this happens normal ip (by numbers only) communication I is OK. Mcafee would not work as it need so resolve names.
BTW my Mcafee is ver7.x
nippit |
c0mm0n
Joined: Jan 14, 2003
Posts: 216
From: Paris, France
PM |
well after 4 hours of test, i've found a howot that seem to work - 5 times in a row succefully tested, waiting for feedback from friends to validate -
Here's my actual howto - tested with t68i r2 and msi v373 -
Delete any pairing between t68i and pc - on both sides -
Delete any pairing between t68i and any headset
On windows, launch a service detection on the t68i, you should a "voice gateway" profile
On the t68i, go to bluetooth/paired devices/add device/prai by tel/PC/
When the t68i says "Prepare your pc", double click on the "voice gateway" service you've just discovered on windows
The t68i ends its search - on windows side you get "impossible to connect" but no panic  -
The pc should be discovered, just pair it
Your PC should now be the t68i headset,
to check this and handle how they'll work together, you'll find a "headset sound" in bluetooth/option and also a way to check you're connected in connections/accessory - hbh should appear, clicking on it, creates or recrates connection between t68i and pc -
nb :
- this pairing method hasn't prevented me from using a serial connection between my pc and the phone, so if you do'nt have any headset yet you won't have to modify your settings for ohter purposes
- the t68i doesn't allow 2 headset at the same time..i'd wish it could manage these with a check box in the accessory menu or even better with the profiles - the profile issue on the t68 doesn't seem to manage the accessories...even if there's a menu.. -
|
SEMIDEUS
Joined: Feb 20, 2003
Posts: 9
PM |
Ok guys... I have Windows ME and a mitsumi bud. Here's a problem:
I installed the Anycom software and put the mitsumi inf file on c:\windows\inf The pc recognised the mitsumi as TDK usb dongle.
Everything worked ok with t68i except XTND synch. It showed a epmworker error and kernel32.dll doing a fatal error or so. Now after I restarted my pc and done loads of stuff on it I decided a few days later to use the bud again. The pc and phone recognise and pair but when I try to send a file from or to pc it no longer works! It says "Could not send file"...
I'll try to unistall and install but do you have any suggestions? And what about the synch?
I don't know if this might be due to loads of programs I have installed or previous errors I had when installing the Anycom / Widcomm software.
Thanks a lot |
Zwanzig
Joined: Feb 19, 2003
Posts: 28
PM |
@c0mm0n
Thanks for a wonderful guide! It works just fine with my Epox BT-DG02 and t68i, exept one thing. Now I am not able to "print" my sms's to my computer. Got any tips?
@SEMIDEUS
When I synchrosized my t68i with Outlook for the first time it actually took me 10 minutes, so don't worry about your 5 minutes... Or do you mean 5 minutes of trying to find the phone?
If you believe you have any bluetooth programs or drivers, please remove them before you install the new ones. |
antim
Joined: Jan 13, 2003
Posts: 22
PM |
c0mm0n,
Thanks for howto on using pc as a headset to the cellphone. I wonder if you were actually able to hear the sound from the phone in your pc speakers. I was able to make the cellphone to connect to the headset profile on pc even without this complicated paring procedure. However,no matter with or without this procedure I cannot hear anything in my pc speakers (although the connection status on the pc headset profile reports it as 'good'). Do I have any hope?
|
cure
Joined: Feb 15, 2003
Posts: 2
From: Norway
PM |
Where do you get hold of the firmware update for the MSI USB bluetooth dongle? |
c0mm0n
Joined: Jan 14, 2003
Posts: 216
From: Paris, France
PM |
@zwanzig
Zuerst, Guten tag 
I tried this function, it connects to thc pc but just make a "PIM objects transfer" and then creates a mail that should be my incoming sms but the mail is blank...
I think the print function should work with bluetooth printers
With btprint/funsms on my pda, i exactly do what u're wishing
@antim
I know the method is kind of weird but i could successfully try it on a m8's computer yesterday ;
If you see a hbh connected to your phone in the accessory menu, your pairing might be good - if you get "impossible to connect" each time the phone tries to establish a connection with the pc, redo the pairing -
To test it launch a call, than the sound should come out of the speakers
Another thing i've noticed yesterday is that i've been able to pair both my pc and headset with the t68i and then found a way to easily change from one to the other
This will be included, in a global audio howto - i'll also test the fisio -
@cure
The latest msi drivers include a .dfu file
This file is firmware v373
|
Beltxo
Joined: Feb 26, 2003
Posts: 24
PM, WWW
|
Hey, interesting idea to post about Fisio phone!!!!!
I use it, and run a web about it (http://webcindario.com/espaciointerior), with lots of files to download.
Hope you post some "positive" things about it  |
|
|
Posted: 2003-02-21 21:55
