| Author |
Symbian UIQ Modding Tutorial |
strongpak
Joined: Dec 13, 2008
Posts: 2
PM |
PROBLEMS!!
i have followed the instructions you have given in order to hack and overide permissions but i cannot get it to work and dont understand what im doing wrong.
ok heres what i have done so far please tell me what i am doing wrong:
i have downloaded capswitch and swissmanager and installed them on the phone..they both work fine.
then i have opened capswitch program and turned capabilities OFF.
then i have opened swissmanager and enabled viewing of roms etc (under the heading system)
i am able to see all C: drive, D: and also Z: drives.
i have then downlaoded and copied the installer file titled "installserver.exe"
then i have copied that file to the phone.
i have then deleted "installserver.exe" from c:sys/bin and put copied and pasted the new "installserver.exe" into c:sys/bin
i have turned off swiss manager and switched off the phone and switched it back on.
then i have downloaded the sound modlite and copied the sesound patcherexe file to my phone.
however i cannot click the sesoundpatcherexe as it says "unrecognized format. no viewer can be found on your phone to open this file.
please tell me what i am doing wrong i assume i have not hacked my phone properly.
i have followed the forums words for word and cannot understand where i am going wrong in modding my SE G900
please help!
your reply would be greatly appreciated!
thanks
sab |
|
|
ardzuna
Joined: Jan 16, 2008
Posts: 467
PM |
Wow, man, who told you to put the sesoundpatcher.exe on your phone?!
Did you read SWmail's instructions inside the Readme file?
Here is what it says:
Installation
- Unlock access to system folders (look CapsSwitch)
- Download the archive from http://www.agathosyne.de/files_ext/se_uiq3_sound_mod_lite.zip
- Copy the file 'C:\Private\10202be9\persists\1020867a.cre' from the your phone to computer.
- Run se_sound_patcher, select the file '1020867a.cre' copied from phone, press "Install".
- Copy the patched file '1020867a.cre' back to your phone (in dir 'C:\Private\10202be9\persists').
- Immediately restart your smartphone.
In other words, you need to take '1020867a.cre' file from your phone and transfer it to your PC, then patch it on your PC with sesoundpatcher.exe, then put back the patched '1020867a.cre' in your phone, and restart your phone.
Anyway, here you can find the patched '1020867a.cre' file:
http://rapidshare.com/files/173840775/1020867a_patched.rar
I already patched the file, so don't patch it again, just transfer it to C:\Private\10202be9\persists\ and restart your phone.
Patched 1020867a.cre file from P1 is included here too, you can also try it instead of the G900 one with no problems.
|
strongpak
Joined: Dec 13, 2008
Posts: 2
PM |
Hey thanks so much for that....your tutorial was so much easier and straight forward!!! thanks!!
one thing though....it didnt seem like had it any effect on the sound
the G900 has such low sound volume its hard to hear people when in a busy place!
thanks again anyway! |
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
Yeah as I answered your private message, the sound patcher is to be used with your pc... Not in phone. 
|
ardzuna
Joined: Jan 16, 2008
Posts: 467
PM |
On 2008-12-16 23:24:21, strongpak wrote:
Hey thanks so much for that....your tutorial was so much easier and straight forward!!! thanks!!
one thing though....it didnt seem like had it any effect on the sound
the G900 has such low sound volume its hard to hear people when in a busy place!
thanks again anyway!
Well, sound mod lite is used to increase the volume when listening to music through your wired headset. It's not supposed to have any effect on the earpiece volume.
|
samio20
Joined: Dec 19, 2008
Posts: 4
From: Manila, Phil
PM |
very useful tutorial! just follow instructions ( for those who want to modd their uiq ). i'm using my torch right now on my w960! good job thread starter, merry christmas! |
jmbillings
Joined: Sep 28, 2002
Posts: 196
From: Oundle, UK
PM, WWW
|
I did the walkman mod a while back, but revisiting these great instructions I will have to try a couple more! The torch mod would be dead handy, and the increase in sound also.
Thanks to all!
|
khakhi
Joined: Mar 11, 2009
Posts: 47
PM |
STRIZLOW800 ...im stuck.
Ihave installed capsswitch and i can see my "C" and "Z" drive,
I have installed swiss manager too,
I see that you require another installation file "installserver.exe", im battling to download it from the link you posted, can you give me an alternative link or can you email it to me on: khakhi.diala@gmail.com
|
khakhi
Joined: Mar 11, 2009
Posts: 47
PM |
On 2008-12-16 22:18:50, ardzuna wrote:
Wow, man, who told you to put the sesoundpatcher.exe on your phone?!
Did you read SWmail's instructions inside the Readme file?
Here is what it says:
Installation
- Unlock access to system folders (look CapsSwitch)
- Download the archive from http://www.agathosyne.de/files_ext/se_uiq3_sound_mod_lite.zip
- Copy the file 'C:\Private\10202be9\persists\1020867a.cre' from the your phone to computer.
- Run se_sound_patcher, select the file '1020867a.cre' copied from phone, press "Install".
- Copy the patched file '1020867a.cre' back to your phone (in dir 'C:\Private\10202be9\persists').
- Immediately restart your smartphone.
In other words, you need to take '1020867a.cre' file from your phone and transfer it to your PC, then patch it on your PC with sesoundpatcher.exe, then put back the patched '1020867a.cre' in your phone, and restart your phone.
Anyway, here you can find the patched '1020867a.cre' file:
http://rapidshare.com/files/173840775/1020867a_patched.rar
I already patched the file, so don't patch it again, just transfer it to C:\Private\10202be9\persists\ and restart your phone.
Patched 1020867a.cre file from P1 is included here too, you can also try it instead of the G900 one with no problems.
Im having problems with the installation.
Ihave installed capsswitch ans swiss manager.
I can see my "C" "D" and "z" drives
I have also downloaded the sound modlite zip folder onto my pc...from here is where im confused.
How do i copy the 1020867a.cre' from my phone to my computer? i have linked my phone and pc through the USB connection using pc sync.
Please give me a detailed and easy step-to-step tutirial from there...i need to increase the sound volume on my p1i.
Im also battling to download from rapid share...please e-mail the files i will need from rapid share on: khakhi.diala2gmail.com or give me alternative link.
Good work guys |
thematchless
Joined: Mar 13, 2009
Posts: 2
PM |
Ok heres the prob. I have a p1 too, the method you are trying doesn't work on many p1 as the file 1020867a.cre' is not to be found. I recommend that you try either Sound mode full or Monster bass. I have tried them both and the results are outstanding (my Ipod using friends were jealous lol). So try them. Hope this Helps  |
khakhi
Joined: Mar 11, 2009
Posts: 47
PM |
WOW!!!!!!!!!! I did the sound mod...the sound is BLOODY loud!!!!!!!!!!! too loud infact...heres how i did it:
Unlock access to system folders (look CapsSwitch)
Download the archive from http://www.agathosyne.de/files_ext/se_uiq3_sound_mod_lite.zip
Copy the file 'C:\Private\10202be9\persists\1020867a.cre' from the your phone to computer.
Run se_sound_patcher, select the file '1020867a.cre' copied from phone, press "Install".
Copy the patched file '1020867a.cre' back to your phone (in dir 'C:\Private\10202be9\persists').
Immediately restart your smartphone.
I got that from ESTATO FORUMS...VERY SIMPLE INDEED..
up next...the torch mod...
are there any other cool modsfor the P1i????????????
Good work guys
|
chili
Joined: Dec 09, 2004
Posts: > 500
From: Philippines
PM, WWW
|
Sorry if i missed any related posts, but have you guys figured out yet how to make midperx.sis work on G900? I can't make it work on OM 3.11 mod and ReadManiac, they go back to the default "ask every session" no matter what i do  |
thegodz
Joined: Mar 17, 2009
Posts: 11
From: Jakarta
PM |
may i ask any Question guys ? =)
Can i mod my G900 , so my G900 can run PhotoDj and Video Dj ?
please reply my question . . . =D
thanks ... |
piuiq
Joined: Apr 09, 2009
Posts: 1
PM |
Hi guys Swiss Manager Free 1.70 does not work in my p1 as the version has expiry date of 25th march 2009 |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
maybe you didnt download the free one but the pro version. get the free one from here: https://store2.esellerate.net[....]tfyF/swissmgrfree_uiq3_170.sis
|
|
|
Posted: 2008-12-16 20:18
Sony Ericsson software/hardware support! 
