| Author |
C902 Firmware Overview |
Mr Miyagi
Joined: Mar 28, 2005
Posts: > 500
From: UK
PM |
C902 seems to have been withdrawn from the O2 website. it is no longer showing on contract anymore. Only on prepay.
|
|
|
glorfingal
Joined: Jun 10, 2006
Posts: > 500
From: Bristol,UK
PM |
On 2008-07-31 21:30:15, Rookwise wrote:
Just noticed Davinci has R3BA035 firmware for all regions for the C902 ????
Any info on this one ?
Wasn't that the intial release firmware ?? Seem to remember mine had that
and suffered the "reboot" problem !
I reject your reality and substitute my own. |
Rookwise
Joined: Mar 22, 2004
Posts: > 500
From: UK. Phone:Samsung Galaxy A54 5
PM |
Sorry my bad. It was the initial release 
I tried sniffing coke once but didnt like it. The bubbles kept going up my nose  |
masterjonny8
Joined: Jul 03, 2008
Posts: 22
From: Leicestershire, UK
PM, WWW
|
Got the JBenchmark scoores for R3CA033
JBenchmark 3D HQ: 430
JBenchamrk 3D LQ: 402
JBenchmark 2: 1008
JBenchmark 1: 7868
[ This Message was edited by: masterjonny8 on 2008-08-01 02:56 ] |
Nath
Joined: Jul 31, 2008
Posts: 5
PM |
On 2008-07-31 16:31:58, Nath wrote:
I did all of that. Cheers. However...When I go to switch the phone on, I type in the PIN, and up pops a message 'Configuration error. Pleas contact your network operator or service centre'. I'm now worried that I may have voided any warranty etc. Any suggestions? After all the wife will have to take it back all that
I posted this yesterday, somebody please help!!! |
Rookwise
Joined: Mar 22, 2004
Posts: > 500
From: UK. Phone:Samsung Galaxy A54 5
PM |
You've done something wrong when you flashed your phone.If you used the Davinci client. Did you make sure that the Finalise option was ticked.If you didn't put a tick in the box then your phone wouldn't have flashed properly and you get a Configuration Error prompt.
This message was posted from a C902 |
Nath
Joined: Jul 31, 2008
Posts: 5
PM |
I'm sure it was ticked as it is set as default. I think I may have found the problem.
When I connect I get this
Customization info:
1208-7428 R6A
1204-8246 R3BA035
VFE-LIVE-A
The first line relates to the vodafone CDA, which is strange because I flashed it yesterday with the debranded firmware, where as the middle line doesn't seem to be listed on the Davinci Client. Mabe there is a conflict there?
I've highlighted the line 'R3BH002 Customized UK/Luscious Red 1209 1706'. Do you think this will be ok? My fingers are ready to click! The finalized checkbox is definitely checked too. Anything else you think I need to do?
[ This Message was edited by: Nath on 2008-08-01 10:48 ]
[ This Message was edited by: Nath on 2008-08-01 10:50 ] |
Nath
Joined: Jul 31, 2008
Posts: 5
PM |
Well I did it. All ok. Not sure what happened the last time, but this time it took 5 minutes not an hour. Thanks MasterJonny and Rockwise for your help, much appreciated |
Rookwise
Joined: Mar 22, 2004
Posts: > 500
From: UK. Phone:Samsung Galaxy A54 5
PM |
Yes mate that should be fine if you have the Red C902.
The second line is correct for unbranded phones (1024-8246 Then the current firmware version)
It looks like your CDA customization hadn't been changed from Voda to Generic which was causing the configuration error.
You could have contacted Davinci customer support and explained what had happened. They should have given you a free credit due to the client not flashing your phone properly.
I tried sniffing coke once but didnt like it. The bubbles kept going up my nose |
Mr Miyagi
Joined: Mar 28, 2005
Posts: > 500
From: UK
PM |
for all those who have the c902 would you say it would be best going for this handset if i have had the k850i, or am i going to have the same problems with this handset that i did with the k850i?
|
Rookwise
Joined: Mar 22, 2004
Posts: > 500
From: UK. Phone:Samsung Galaxy A54 5
PM |
I've got both the K850 and the C902.The 902 build quality is 100 time's better.They both run the same software platform although the 902 seems to be more stable.902 has a few more applications wheras the K850 has a xenon flash and Micro SD (transflash) card support.If the 902 had a xenon flash it would have been the same size as the K850 due to the size of the capasitor's (sp?) Needed to power the flash.
This message was posted from a C902 |
Paul_C
Joined: Dec 03, 2003
Posts: 249
PM |
A mate of mine has the C902 and is having problems with recording/video playback, its stuttering and missing chunks out! Sounds like a sw issue to me, are there any updates on the horizon that might address this problem??
Ta  |
pedgepuk
Joined: Nov 17, 2004
Posts: 6
PM |
Well looks like the 'recurrent alarm' bug was invoked on me this morning.
I purchased a 4GB Sandisk M2 card last week and copied some media onto it. The MP3 being used to wake me up at 7am is on the card. The alarm did go off yesterday but today I found myself still in bed at 10.10am.
After missing an important meeting at 10am I wasn't best pleased with this. I performed some testing with the recurrent alarm and can definately say that there is a problem there. Different MP3s were attempted but failed to go off. I can only get the phones standard sounds to work but nothing else.
Lets hope SE sort this soon otherwise i'll have to dig out my 1970s alarm clock, yes the one that only has AM stations.
To add, I did upgrade my FW to R3CA033.
Another thing that happened today is that the vibrate feature failed to work when on silent. When I also made a call the other person couldn't hear me. A power off sorted these out.
[ This Message was edited by: pedgepuk on 2008-08-05 14:49 ] |
Taufe
Joined: Jul 19, 2008
Posts: 3
PM |
R3CA033 is now available to Vodafone UK users via SEUS
Updated mine last night and all seems OK so far
Loads quicker through the menus |
3ple4
Joined: Jun 09, 2005
Posts: 14
From: Manila, Philippines
PM |
Hi! My firmware version is R3BH002 (China version), would anyone know if this is the latest one? Its been upgraded already but maybe SE has already made a new one. |
|
|
Posted: 2008-07-31 22:06
