| Author |
Super camera driver for k750/w800/w810 |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
A4A - 12.00 UPDATE 29/01/2008
http://www.mediafire.com/?edeyndtg4ms (Fixed jpeg for w810i)
Hello everyone. It has been nearly one month since last version of A4A was updated. Today, I would like to introduce everyone a new version of A4A.
Although from the first look, the code looks similar to my master's driver but I already edited and added some new functions on it. (Bcz master's driver has almost no bug  ).
A4A 12.00 has 2 versions: 1 for w800i/k750i and 1 for w810i which I haven't tested yet.
FUNCTION:
Normal mode for EM off
Fine mode for EM on
Macro off for normal focus
Macro on for Quick focus (close-up shot)
EV_M_20= #SET_CC_CYAN;
EV_M_17= #SET_CC_RED;
EV_M_13= #SET_CC_BLUE;
EV_M_10= #SET_CC_YELLOW;
EV_M_07= #SET_ZOOM;
EV_M_03= #ISO;
EV_0_00= #SET_FOCUS;
EV_P_03= #SET_EXPOSURE;
EV_P_07= #SET_LIGHT_METERING;
EV_P_10= #SHUTTER_MOD;
EV_P_13= #SET_SATURATION;
EV_P_17= #K_PROFILE; ***
EV_P_20= #SET_PROFILE;
New-testing code
-Pixel correction I hope this could reduce noise. Base on w850i code, I edited it so that it is suitable on our phone. So far I can see a slight improvement but it is still not perfect.
- Sharpness New calculation of sharpness. If you get blur pictures please reduce the sharpness value on the top of the code to 1 value.
-Forced ISO in prop_b
-***: Kriomag's WB control. At EV +1.7, you can use Zoom to use WB control on Kriomag's driver
Hope you all enjoy it and post some pictures.
Best wishes to everyone.
[ This Message was edited by: lpachuong on 2008-01-29 18:43 ] |
|
|
petkoxray
Joined: Sep 23, 2007
Posts: 76
PM, WWW
|
On 2008-01-29 15:39:36, Kriomag wrote:
On 2008-01-29 15:22:18, petkoxray wrote:
If i can't find this commands is that mean that is disabled ?
no, that means its enabled (enabled by default) - to turn it off You have to use command with value 01 
Where i need to put it ?
And when it disabled it make picture no noisy ? Or i wrong |
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2008-01-29 16:08:49, petkoxray wrote:
On 2008-01-29 15:39:36, Kriomag wrote:
On 2008-01-29 15:22:18, petkoxray wrote:
If i can't find this commands is that mean that is disabled ?
no, that means its enabled (enabled by default) - to turn it off You have to use command with value 01
Where i need to put it ?
And when it disabled it make picture no noisy ? Or i wrong
download my driver and study it
if You disable filtering = little more noise (at high iso) so You have make rules when to disable it and wnen to enable it (i have enabled it for EM/ENM/LedEM/LedENM and for pictures with zoom etc.).
As You can see its not so simple to just disable it
Also: You have to disable it only for taken pictures (when in preview mode it should be enabled).
:] hehe |
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2008-01-29 15:20:16, lpachuong wrote:
New-testing code
-Pixel correction I hope this could reduce noise. Base on w850i code, I edited it so that it is suitable on our phone. So far I can see a slight improvement but it is still not perfect.
New feature? Could You explain how it works? what command is used etc. THX |
petkoxray
Joined: Sep 23, 2007
Posts: 76
PM, WWW
|
On 2008-01-29 17:26:58, Kriomag wrote:
On 2008-01-29 16:08:49, petkoxray wrote:
On 2008-01-29 15:39:36, Kriomag wrote:
On 2008-01-29 15:22:18, petkoxray wrote:
If i can't find this commands is that mean that is disabled ?
no, that means its enabled (enabled by default) - to turn it off You have to use command with value 01
Where i need to put it ?
And when it disabled it make picture no noisy ? Or i wrong
download my driver and study it
if You disable filtering = little more noise (at high iso) so You have make rules when to disable it and wnen to enable it (i have enabled it for EM/ENM/LedEM/LedENM and for pictures with zoom etc.).
As You can see its not so simple to just disable it
Also: You have to disable it only for taken pictures (when in preview mode it should be enabled).
:] hehe
Yes i am looking for things in your driver but i don't understand all
Can you give me some links for camera modding learning ;?
|
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2008-01-29 20:48:14, petkoxray wrote:
Yes i am looking for things in your driver but i don't understand all
Can you give me some links for camera modding learning ;?
yes: http://www.esato.com/board/viewtopic.php?topic=135737&start=8310# 
Everything i learned is from this topic
you can try to translate russian big instruction (by SPU) its on Rider-s server: http://raider.4shared.com - good luck (and use google translate!) |
wickedsick
Joined: Aug 16, 2007
Posts: 161
PM |
On 2008-01-29 15:43:32, lpachuong wrote:
A4A - 12.00 UPDATE 29/01/2008
http://www.mediafire.com/?edeyndtg4ms (Fixed jpeg for w810i)
Hello everyone. It has been nearly one month since last version of A4A was updated. Today, I would like to introduce everyone a new version of A4A.
Although from the first look, the code looks similar to my master's driver but I already edited and added some new functions on it. (Bcz master's driver has almost no bug ).
A4A 12.00 has 2 versions: 1 for w800i/k750i and 1 for w810i which I haven't tested yet.
FUNCTION:
Normal mode for EM off
Fine mode for EM on
Macro off for normal focus
Macro on for Quick focus (close-up shot)
EV_M_20= #SET_CC_CYAN;
EV_M_17= #SET_CC_RED;
EV_M_13= #SET_CC_BLUE;
EV_M_10= #SET_CC_YELLOW;
EV_M_07= #SET_ZOOM;
EV_M_03= #ISO;
EV_0_00= #SET_FOCUS;
EV_P_03= #SET_EXPOSURE;
EV_P_07= #SET_LIGHT_METERING;
EV_P_10= #SHUTTER_MOD;
EV_P_13= #SET_SATURATION;
EV_P_17= #K_PROFILE; ***
EV_P_20= #SET_PROFILE;
New-testing code
- Pixel correction I hope this could reduce noise. Base on w850i code, I edited it so that it is suitable on our phone. So far I can see a slight improvement but it is still not perfect.
- Sharpness New calculation of sharpness. If you get blur pictures please reduce the sharpness value on the top of the code to 1 value.
-Forced ISO in prop_b
- ***: Kriomag's WB control. At EV +1.7, you can use Zoom to use WB control on Kriomag's driver
Hope you all enjoy it and post some pictures.
Best wishes to everyone.
[ This Message was edited by: lpachuong on 2008-01-29 18:43 ]
Big thank to you. I have been waiting for your new driver for a long time. Going to try it. |
tommymar
Joined: Aug 10, 2007
Posts: 76
PM |
lpachuong: It is simply fine. Colours are real and functional as usual. I can see less noise on this new driver comparing with that on the previous driver but look like we cannot remove noise totally. Thank you. |
wickedsick
Joined: Aug 16, 2007
Posts: 161
PM |
I agree with tommymar. I have just tested night mode and it is lovely. I will try with landscape tomorow. Thank again. |
MarkJason
Joined: Dec 03, 2005
Posts: 194
From: Bacolod City, Philippines 6100
PM |
using these command consecutively
#CMD(5B, 00)
#CMD(56, 00)
Will the sharpness set will change from 5 to 0 if in the seq_init, #CMD(56, 05) is set?
K750>W800 CID49 R1BC002 : Sarmad 5.8 camdriver / Hyper v6 + HyperPHF acoustic |
Sombra
Joined: Mar 28, 2007
Posts: 165
From: Brazil
PM |
@lpachuong
Very thanks man!
Now installing your new camdriver.
--------------------------------------------------
After some tests using Raiderski 6.7.2 for CID36 in CID49 phone, the result is no good and the best version is really for CID49.
Sorry for my poor english.
K850i R1FA035 - Testing Strong's Camdriver 1.4 Beta2 |
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
i've found small bug - when You turn off preview zoom filtering is still disabled.
Plz answer to my previous question PLZ!
PS. Why You have pasted this macros into the driver:
FRAME_OUTPUT_ON= #REG_BANK_00 #REGISTER_MODIFY(dd, #SET_BIT_4);
FRAME_OUTPUT_OFF= #REG_BANK_00 #REGISTER_MODIFY(dd, #CLEAR_BIT_4);
if they are not used anywhere? :/
[ This Message was edited by: Kriomag on 2008-01-30 11:07 ] |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
On 2008-01-30 11:59:03, Kriomag wrote:
i've found small bug - when You turn off preview zoom filtering is still disabled.
Plz answer to my previous question PLZ!
PS. Why You have pasted this macros into the driver:
FRAME_OUTPUT_ON= #REG_BANK_00 #REGISTER_MODIFY(dd, #SET_BIT_4);
FRAME_OUTPUT_OFF= #REG_BANK_00 #REGISTER_MODIFY(dd, #CLEAR_BIT_4);
if they are not used anywhere? :/
[ This Message was edited by: Kriomag on 2008-01-30 11:07 ]
Sorry kriomag for my late reply to your messege. My AOL has some problem and I could not get into esato 
Frame code doesn't work at the moment bcz i havent found the correct reg for them. i put it here so that I can remember to do some things later (I have bad memory )
Thank you for poiting me the bug. What do you think about the quality. I would like to hear your point of view |
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2008-01-30 17:26:29, lpachuong wrote:
Thank you for poiting me the bug. What do you think about the quality. I would like to hear your point of view
Quality is good as far i tested it - minimum noise (i wonder what cause this? longer exposure or ?).
One thing what i dont like is 1 sec exposure time in day mode = blurry pictures (even my hand isnt as steady! heh).
So tell me plz. what You did to minimize noise level? is this longer exposure doing or this code from w850i (which part of it - im really interested if it really works i would really appreciate if You would explain this to me (PM or here) - testing it for my self would take so much time... thx! |
pofi
Joined: Jan 29, 2008
Posts: 33
PM |
hi kriomag,
i tested your beta driver on my w810i cid50.
i think the colors are not properly calibrated especially the red and the blues.
I included some pics..
The last four lines to the right were noticably far from there original colors..
Sir Kriomag this is just a feedback (I hope you don't take this negatively)from a w810i cid50 R4ED001 user and I know that the driver I used is not designed for my unit..
Anyway I hope you could develop a specific driver for w810i cid50 model.
Thanks.. ^_^ V
|
|
|
Posted: 2008-01-29 15:43
