| Author |
Super camera driver for k750/w800/w810 |
Vipera ammodytes
Joined: Sep 22, 2004
Posts: > 500
From: Serbia
PM |
nice pictures!
guys is there any chance to change glass which protect camera module?
OnePlus 8 |
|
|
leetiran
Joined: Aug 15, 2007
Posts: 134
From: China
PM |
Raiderski
It seems that there is Exif bug when using manual shutter. The Exif looks like the one taken in Normal mode.
And a suggestion, i think the scene (51,04) maybe also can be used in EM.
[ This Message was edited by: leetiran on 2007-12-26 06:57 ] |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
Vipera ammodytes
definetly yes! i heard that this is plastic with additional coating which is easy to scratch (my case) or to rub (brighter photos**). this is some kind of cheap polarizing (because of **) photographic filter. find someone who knows 'everything' about photo filters, prepare 2 sunlight photos (with protection and without protection), show them to that person - he can find the best replacement (photo filter). buy photo filter, go to optican let it cut out small circle which you can put instead of plastic thing - i'm thinking about this too
leetiran
bug? where exactly? i don't see nothing strange. scene 04 in EM can be of course used but i had no free time to check how it's working. in EM code is shutter speed calculation from AE value, so scene 04 must be applied before calculation or after calculation. i have free time today and i will check this
WTF?! this isn't joke! outstanding I-Mobile 902 is equipped in Sony CCD camera system. i can't believe that Sony shooted in the own knee  what an idiots...
[ This Message was edited by: Raiderski on 2007-12-26 14:04 ] |
SPU
Joined: Feb 07, 2007
Posts: 131
From: Russia, SPb
PM |
Raiderski
This is infrared (infrared removal) filter. You can replace it with a piece of exposed film (removes normal light but leaves intact infrared light) and use phone as infrared camera =).
http://www.mobile.gemtech.net.au/750/tricks/irphotos.html
W800i CID36 R1BD001 |
ukaszek
Joined: Jan 30, 2007
Posts: 29
PM |
kriomag 21,91 + autocolor ACDSee 
merry x-mas for all  |
degraaff
Joined: Dec 20, 2007
Posts: 170
From: poo
PM |
Some pictures that I have taken with k750, using super camera driver 6.7:
[ This Message was edited by: degraaff on 2007-12-26 22:08 ] |
leetiran
Joined: Aug 15, 2007
Posts: 134
From: China
PM |
On 2007-12-26 11:20:01, Raiderski wrote:
leetiran
bug? where exactly? i don't see nothing strange. scene 04 in EM can be of course used but i had no free time to check how it's working. in EM code is shutter speed calculation from AE value, so scene 04 must be applied before calculation or after calculation. i have free time today and i will check this
[ This Message was edited by: Raiderski on 2007-12-26 14:04 ]
Not always, but so often. for example, The Exif should be ISO 100, 1s, but it shows ISO 800, 1/5s.
I think the scene 04 appliction after calculation will be ok. Because the shutter speed calculation is to make iso=100, and scene 04 iso=100.
[ This Message was edited by: leetiran on 2007-12-27 03:06 ] |
pram_zx
Joined: Mar 02, 2007
Posts: 161
From: NoWhere Island
PM |
@degraaff
I see some blurry pictures, its out of focus on macro mode, why?
the driver or your hand shake?
_________________
W810i Black with W800 back cover, modded camdriver, Own mix acoustic driver, Unbranded phone, Adding new flash menu's. W810i It's Rock...!
[ This Message was edited by: pram_zx on 2007-12-27 04:01 ]
[ This Message was edited by: pram_zx on 2007-12-27 04:35 ] |
pram_zx
Joined: Mar 02, 2007
Posts: 161
From: NoWhere Island
PM |
@W810i User
Sarmad has release Sarmad 6.0, its only for W810, not for k750/w800 because the aggressive setting....
Go for it...
http://forums.se-nse.net/index.php?showtopic=20252
_________________
W810i Black with W800 back cover, modded camdriver, Own mix acoustic driver, Unbranded phone, Adding new flash menu's. W810i It's Rock...!
[ This Message was edited by: pram_zx on 2007-12-27 04:25 ]
[ This Message was edited by: pram_zx on 2007-12-27 05:31 ] |
hemnath123
Joined: Dec 04, 2006
Posts: 49
PM |
Pictures taken from Raiderski v6.6.1 driver.
The 1st picture is taken from moving bus at 40 kmph
|
pram_zx
Joined: Mar 02, 2007
Posts: 161
From: NoWhere Island
PM |
Then I know what the meaning of aggressive settings mean by sarmad on Sarmad v6.0
I ask:
@Sarmad
Just want to know, what compressione in normal and fine quality, is the same? is 95%?
Thanx B4 for your reply
Cheers...
Sarmad says:
The quality setting is at 100% in both normal and fine.
As before, Fine quality gives longer exposure than Normal.. that's the only difference between the two.
_________________
W810i Black with W800 back cover, modded camdriver, Own mix acoustic driver, Unbranded phone, Adding new flash menu's. W810i It's Rock...!
[ This Message was edited by: pram_zx on 2007-12-27 08:49 ] |
wickedsick
Joined: Aug 16, 2007
Posts: 161
PM |
Sarmad 6.0 is the same as 5.8 apart from the fact that compression is at 100%. Therefore, the quality is the same. I dont understand what took him a long time to release a new version for just higher compression ??? |
degraaff
Joined: Dec 20, 2007
Posts: 170
From: poo
PM |
On 2007-12-27 02:57:15, pram_zx wrote:
@degraaff
I see some blurry pictures, its out of focus on macro mode, why?
the driver or your hand shake?
My hand shaked because it was cold outside |
679
Joined: Oct 05, 2006
Posts: 174
PM |
Raiderski,
Thx a lot for new 6.7.
I try 6.7 after long sticking to 21.92 for K750 CID36. Of course i configure 6.7 to be most like 21.92. It was easy.
Also i adjust some lines in result driver to match my needs.
// ------------------------- CUSTOMIZE INITIALS
WORK_AS_STANDARD= $s0 02;
EM_IN_QUALITY= $-1 01;
SHARPNESS= 04;
BRIGHTNESS= 00;
CONTRAST= 00;
SATURATION= 04;
SATURATION_SS= 01;
EXPOSURE= $-0 09;
FILTERING= $s0 01;
AF_MACRO_SCAN_MODE= $s0 00;
FOCUS_PREVIEW_ZOOM= 08;
JQ_NORMAL= $s2 59;
JQ_FINE= $s2 5a;
Seem these lines are OK?
As i like fast shooting even with little noise, so i've changed
EM_RATIO_NORMAL= $s0 3b;
EM_RATIO_NIGHT= $s0 3b;
Than i have EM exposure up to 1/6 and ISO upto 500 with suitable noise.
and for ENM 1s max and ISO 160.
And i like max zoom for pictures 2X and for video 4X.
so my changing:
// digital zoom
ZOOM_PHOTO=$s0 46 $s1 %0 $-0 r1 $<0 5 $/0 1e; // ZOOM 2X
ZOOM_VIDEO=$s0 64 $<0 3 $s1 %0 $<1 4 $-0 r1 $/0 0a; // ZOOM 4X
Thats all. And i enjoy with shooting but discovered one problem.
When i am in MACRO + zoom 1.1-4.0 i'm shooting without autofocusing. It is OK.
But when i turn off macro, and set zoom 1.0 i cant return to autofocus mode. Immediatly after shutter half-pressed i've got this green small frame. And even after swithing to VR mode the same effect.
Only after camera cover reopening i can use autofocus and zoom.
I cant connect my seems lite changes with this problem.
Does anybody have the same effect in 6.7?
THX.
|
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
hi
leetiran
yep, exif problem confirmed. i know what is wrong
679
1. changes are ok
2. try this:
macro on, x1.1, macro off, x1.0 (AF probably isn't working at this moment), x1.1, x1.0 (AF should work)
give me results and send me your code at PM
so, 6.7.1 should be available soon, maybe today
|
|
|
Posted: 2007-12-25 22:32
