| Author |
Super camera driver for k750/w800/w810 |
terminator17
Joined: Jul 04, 2007
Posts: 155
PM, WWW
|
A4A 11.00 Reloaded
http://www.freewebs.com/ict20[....]driver0%2011.00%20reloaded.DAT 95%
http://www.freewebs.com/ict2006_2007/camdriver0%2011.00%2091.dat 91%
and
http://www.mediafire.com/?atxv95x1tiu
are these all same????
|
|
|
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
for K790/K800/K810 none. they already have 5sec which is long enough to protect against camera crash due to unreachable parameters sent to jpeg encoder
|
number1
Joined: Sep 12, 2007
Posts: > 500
From: UK,kent,Sittingbourne
PM |
On 2007-12-17 13:09:44, Raiderski wrote:
for K790/K800/K810 none. they already have 5sec which is long enough to protect against camera crash due to unreachable parameters sent to jpeg encoder
ok thanks for that i increased it to 6sec anyway |
leetiran
Joined: Aug 15, 2007
Posts: 134
From: China
PM |
Is there a java application running on the phone to read the exif of picture? |
number1
Joined: Sep 12, 2007
Posts: > 500
From: UK,kent,Sittingbourne
PM |
On 2007-12-17 13:32:05, leetiran wrote:
Is there a java application running on the phone to read the exif of picture?
i want a java exif reader aswell, it would be very very useful |
Randolph
Joined: May 21, 2007
Posts: 115
PM |
Blair Witch mood near my home...
shot with K750i CID49with Cammodule CID 36 and Raider 6.6 driver 91% sharpness=5 where i added the effects from strong´s driver  ... |
gabrielrm
Joined: May 19, 2007
Posts: 18
PM |
Java exif reader from SPU post on page 450:
"...
Links (15 kB):
http://nwamdclub.nktb-kristall.ru/ExifReader_1_0_a.rar
http://nwamdclub.nktb-kristall.ru/ExifReader_1_0_a.zip
NOTE that this is an ALPHA version!" |
number1
Joined: Sep 12, 2007
Posts: > 500
From: UK,kent,Sittingbourne
PM |
thanks it works fine. |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
How to clear noise in the photos with PHOTOSHOP
This method is used to remove noise, not to sharpen the detail in the pictures.
Open the photo in your raw conversion software.
Select a white balance for the photo.
Make no other alterations in the raw conversion. In particular, do not modify levels in such a way as to clip dark values, and do not allow the RAW converter to apply sharpening.
Open your calibration frame in the raw conversion software and apply the same conversion settings to it as will be used for the photo.
Convert the raw images to maximum bit depth TIFF files.
Load both the TIFF files in Photoshop.
Select the calibration frame.
Press "ctrl-a" or choose "All" from the Select menu to select all of the calibration frame.
Press "ctrl-c" or choose "copy" from the Edit menu to copy the calibration frame to the clipboard.
Select the photo.
Press "ctrl-v" or choose "paste" from the Edit menu to paste the calibration frame into your photo as a new layer.
Close the calibration file.
Select the new layer in your photo - the one that was created by copying the calibration frame (we will call this the calibration layer).
Open the Blending Options dialogue (or make the following adjustments at the top of the Layers window).
Select "difference" for Blend Mode.
Select 100% for Opacity.
For more details, please visit: http://photo.net/learn/dark_noise/
Hope this is useful for everyone. I really hate noise 
[addsig] |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
A4A Camdriver 11.01 18/12/2007
Revision 
Compression: 91%
Normal mode: EM Off
Fine Mode: EM On
Functions:
EV_M_20= #CC_GREEN;
EV_M_17= #CC_MAGENTA;
EV_M_13= #CC_BLUE;
EV_M_10= #CC_YELLOW;
EV_M_07= #CHANGE_ZOOM;
EV_M_03= #ISO;
EV_M_031= #SET_FPS; (In video mode)
EV_00= #CHANGE_FOCUS;
EV_P_03= #SET_EXPOSURE;
EV_P_07= #SPOT_ON;
EV_P_10= #SHUTTERSPEED;
EV_P_13= #SET_FLICKER;
EV_P_17= #SCENE;
EV_P_20= #SET_PROFILE;
Sharpness: Recalculated value for better sharpness - noise reduction
Video mode: you will be suprised with the quality of the video you record.
Colours: Real true colour
Issues:
Viewfinder: slowlier frame rate for better focus => Yellowish effect may happen but the final picture will be perfect
Hope you all enjoy.
Looking forward to seeing your pictures.
Yours regards.
Link:
http://forums.se-nse.net/index.php?act=attach&type=post&id=13159
http://www.mediafire.com/?dq2gs1xzxzj
Get ready for Christmas !!!
_________________
To be or not to be !!! 
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2007-12-18 00:42 ] |
leetiran
Joined: Aug 15, 2007
Posts: 134
From: China
PM |
Thanks a lot |
terminator17
Joined: Jul 04, 2007
Posts: 155
PM, WWW
|
On 2007-12-18 01:39:14, lpachuong wrote:
A4A Camdriver 11.01 18/12/2007
Revision
Compression: 91%
Normal mode: EM Off
Fine Mode: EM On
Functions:
EV_M_20= #CC_GREEN;
EV_M_17= #CC_MAGENTA;
EV_M_13= #CC_BLUE;
EV_M_10= #CC_YELLOW;
EV_M_07= #CHANGE_ZOOM;
EV_M_03= #ISO;
EV_M_031= #SET_FPS; (In video mode)
EV_00= #CHANGE_FOCUS;
EV_P_03= #SET_EXPOSURE;
EV_P_07= #SPOT_ON;
EV_P_10= #SHUTTERSPEED;
EV_P_13= #SET_FLICKER;
EV_P_17= #SCENE;
EV_P_20= #SET_PROFILE;
Sharpness: Recalculated value for better sharpness - noise reduction
Video mode: you will be suprised with the quality of the video you record.
Colours: Real true colour
Issues:
Viewfinder: slowlier frame rate for better focus => Yellowish effect may happen but the final picture will be perfect
Hope you all enjoy.
Looking forward to seeing your pictures.
Yours regards.
Link:
http://forums.se-nse.net/index.php?act=attach&type=post&id=13159
http://www.mediafire.com/?dq2gs1xzxzj
Get ready for Christmas !!!
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2007-12-18 00:42 ]
thnx 4 ur new driver..ll giv it a try
but can u please remove this yellowish preview...
thanx anyways
_________________
SE W810i,CID49,R4EA031
[ This Message was edited by: terminator17 on 2007-12-18 04:55 ] |
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2007-12-18 01:39:14, lpachuong wrote:
A4A Camdriver 11.01 18/12/2007
Pictures are very big (550-600kB) and seems to be stable - no camera crashes so far
Video is really good quality, maybe not as smooth it can be but less compressed so looks more detailed
Can i use your settings in my driver? i will test it few more days and if stable i would like to use them. |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
Can i use your settings in my driver? i will test it few more days and if stable i would like to use them.
First of all, thank you for your comments. About ur question, I think you know my answer Of course yes. We are here to help each other. Maybe you will find a better way to improve it. And some where in my driver, I am using ur code already (Thanks to you, SPU, Raiderski and chengrong)
PS: I found some arguement about the 'leaking' driver on k800i/k810i post, this reminds me about my old friend here, lengthstreet, how are you doing?
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2007-12-18 09:59 ] |
679
Joined: Oct 05, 2006
Posts: 174
PM |
On 2007-12-18 10:48:54, lpachuong wrote:
Can i use your settings in my driver?...
First of all, thank you for your comments. About ur question, I think you know my answer Of course yes....
Hope for amazing new features in new camdrivers.
One small (but may be not very easy) request to all wise camdriver modders.
Can we ask you comment in driver body some important lines like about VR or pictures quality, FPS, and so on. Yes, its waste of time, but is very usefull for other users.
I often have my own request for existing camdriver modding but have not enough knowlege to make it. For example i've made ZOOM PREVEIW in 21.92 only for range 2.4-4.0 as i'm far sighted but it was quite a job for me.
So it will be a great help for not so expereienced camdriver voluntiers...
THX. |
|
|
Posted: 2007-12-17 13:08
